Search results for " machine"
showing 10 items of 1317 documents
Fatigue methodology for life predictions for the wheel-rail contact area in large offshore turret bearings
2016
The present report presents a fatigue life prediction method for large roller bearings applied in the turret turn table for large loading buoy units. The contact points between wheel and rail in these bearings are subjected to a multi-axial fluctuating stress situation and both surface wear and fatigue cracking may occur. A methodology based on the Dang Van fatigue criterion is adopted. The criterion is based on an equivalent stress defined as a combination of the fluctuation of the shear stress from its mean value at a critical plane and the associated hydrostatic stress at the given time. The present work is supporting the theoretical model by extensive laboratory testing. Both full scale…
Behaviour of a speargun with a novel muzzle - Comportamento di un fucile subacqueo con testata innovativa
2013
The paper presents the results of a numerical and experimental investigation performed on a barrel of a speargun equipped with two kinds of muzzle. In particular, a standard muzzle for speargun (having an elastic propulsion) has been compared with an innovative one called ‘roller’. This new muzzle is equipped with two rollers and special bands. The rubber bands, fixed at the lower side of the barrel, run through the rollers and are engaged in suitable seats of the shaft. These bands are, therefore, longer than the traditional ones and, consequently, with equal force applied by the diver, the roller speargun has a longer range. Thanks to the particular geometry of the new muzzle, one of the …
A cogging torque minimization procedure for IPMSMs based on different laminate geometry
2016
This paper presents a possible minimization procedure of the cogging torque generated by an IPMSM (Interior Permanent Magnet Synchronous Machine) with a progressive modification of a basic geometrical structure of rotor laminates. More in detail, an IPMSM model is analyzed by using a Finite Element Method (FEM) approach. Then, other IPMSM models, which are obtained by modifying the geometry of the IPMSM rotor laminates and by maintaining the same stator configuration, are proposed and discussed. From the obtained simulation results, the cogging torque components for each structure are determined by means of FEM and compared to each other. From this comparison, it can be stated that the cogg…
A two-stage fault detection and classification for electric pitch drives in offshore wind farms using support vector machine
2017
This article presents a two-stage fault detection and classification scheme, for induction motor drives in wind turbine pitch systems. The presented approach is suitable for application in offshore wind farms. The adopted strategy utilizes three phase motor current sensing at the pitch drives for fault detection and only when a fault is detected at this stage, features extracted from the current signals are transmitted to a central support vector machine classifier. The proposed method is validated in a laboratory setup of the pitch drive.
Local DoS applications with micro wind generation systems
2015
In this paper a wind electrical power generation system for Distributed on Site (DoS) applications is proposed. This system was developed and conceived in order to guarantee simple installation, use and service, obtaining a product that can be easily industrialized and put into the market with limited costs. The field of application of such an electrical generation system is addressed towards domestic or at the most toward condominium applications concerning moreover the opportunity of working in addition to combined photovoltaic and solar-thermal systems to enhance the renewable energy generation at house level (DoS). The proposed system has its hot spot in the blades shape, in the wind fl…
A Model-Based Control Strategy for Wind Turbines with Asynchronous Generator
2007
In this paper a model based control methodology is described with reference to a wind turbine for production of alternative energy. The mathematical model of a 600 kW wind turbine is taken into account assuming a well defined profile of the rotor blades. A set of reference angular speeds of the asynchronous generator and a set of reference pitch angles of the blade wind turbine are obtained in order to maximize the extracted wind power and to reach equilibrium conditions between the wind-generated torque and the electric torque of the generator. Finally a PID model based controller is designed and then tested by means of simulation experiments.
Vibration signature analysis for rotor broken bar diagnosis in double cage induction motor drives
2013
The paper investigates the diagnosis of rotor broken bars in field oriented controlled (FOC) double cage induction motor drives, using current and vibration signature analysis techniques. The Impact of the closed loop control system cannot be neglected when the detection of asymmetries in the machine are based on the signature analysis of electrical variables. The proposed diagnosis approach is based on optimized use of wavelet analysis by a pre-processing of phase current or axial/radial vibration signals. Thus, the time evolution of the tracked rotor fault components can be effectively analyzed. This paper shows also the relevance of the fault components computed from axial vibration sign…
Discussion of “Simple Flume for Flow Measurement in Open Channel” by Zohrab Samani and Henry Magallanez
2002
This paper is a Discussion of “simple flume for flow measurement in open channel".
The use of sea waves for generation of electrical energy and Hydrogen
2009
Recently linear synchronous generator for the exploitation of sea wave energy has been proposed. That solution does not require reactive power to magnetize but needs permanent magnets to assure the excitation. The electrical energy generated by such a device must be converted and conditioned in order to match the instantaneous utility requirements and a power link from the sea to an interconnection is needed. In this paper in order to overcome that difficulty, the authors propose the use of the electrical energy generated to generate “in situ” hydrogen. As a result the output of the generation would be hydrogen that can be stored and used when needed The proposed electrical generator is a P…
A knowledge-based master-model approach with application to rotating machinery design
2011
Novel rotating machinery design concepts and architectures are being explored to reduce mass, energy consumption, manufacturing costs, and environmental impact while increasing performance. As component manufacturers supply parts to original equipment manufacturers, it is desirable to design the components using a systems approach so that they are optimized for system-level performance. To accomplish that, suppliers must be able to model and predict the behavior of the whole machinery. Traditional computer-aided design/computer-aided engineering master-modeling approaches enable manual changes to be propagated to linked models. Novel knowledge-based master-modeling approaches enable automa…