Search results for "Energy Conversion"
showing 10 items of 134 documents
Atomic Layer Deposition of Spinel Lithium Manganese Oxide by Film-Body-Controlled Lithium Incorporation for Thin-Film Lithium-Ion Batteries
2013
Lithium manganese oxide spinels are promising candidate materials for thin-film lithium-ion batteries owing to their high voltage, high specific capacity for storage of electrochemical energy, and minimal structural changes during battery operation. Atomic layer deposition (ALD) offers many benefits for preparing all-solid-state thin-film batteries, including excellent conformity and thickness control of the films. Yet, the number of available lithium-containing electrode materials obtained by ALD is limited. In this article, we demonstrate the ALD of lithium manganese oxide, LixMn2O4, from Mn(thd)3, Li(thd), and ozone. Films were polycrystalline in their as-deposited state and contained le…
Synthesis and photovoltaic performance of the porphyrin based sensitizers with 2H-[1,2,3]triazolo[4,5-c]pyridine and benzotriazole as auxiliary accep…
2017
Abstract Two novel zinc porphyrin dyes containing either benzotriazole or 2 H -[1,2,3]triazolo[4,5- c ]pyridine as auxiliary acceptors, respectively, were synthesized for dye-sensitized solar cells. These two auxiliary acceptors were firstly applied into porphyrin based dyes. The photophysical and electrochemical properties of the dyes were investigated. These two dyes show the whole visible light absorption when they are adsorbed on the TiO 2 film, which means that they are promising sensitizers for dye-sensitized solar cells. The absorption intensity of the triazolopyridine containing dye is higher than that of the benzotriazole containing dye, resulting in a better light harvesting. Thus…
Dynamic preparation of TiO2 films for fabrication of dye-sensitized solar cells
2006
Preparation of nanocrystalline porous titanium dioxide (TiO2) films with roll-to-roll compatible methods was studied. Gravure printing was used for spreading TiO2 paste and paper calendering for pressing TiO2 nanoparticle films. Influence of different preparation methods on performance of fabricated dye-sensitized solar cells (DSSCs) was investigated. The attained light into electricity conversion efficiency was compared with DSSCs fabricated on conductive plastic substrates by doctor-blading spreading with subsequent static pressing. The latter method achieved a light conversion efficiency as high as 5.1%. The efficiency of the cells with a gravure printed TiO2 film was found to be rather …
Perovskite CH3NH3PbI3–XClx Solar Cells. Experimental Study of Initial Degradation Kinetics and Fill Factor Spectral Dependence
2021
The main drawback of the methylammonium lead halide perovskite solar cells is their degradation in ambient atmosphere. To investigate ambient-air-induced cell degradation, spec-tral dependencies of open-circuit voltage (VOC), fill factor (FF) and the power conversion effi-ciency (PCE) have been acquired (for the first time reported in literature). Our custom-made measurement system allowed us to perform measurements of the above-mentioned entities in situ directly in vacuum during and after thermal deposition of the elec-trode. We also studied how these parameters in vacuum changed after cell exposure to ambient air for 85 min (50 nm top electrode) and for 180 min (100 nm top Ag electrode).…
Electro-optical characterization of ruthenium-based dye sensitized solar cells: A study of light soaking, ageing and temperature effects
2017
Abstract In this work, we report on the electro-optical characterization of Dye Sensitized Solar Cells (DSSCs) which use ruthenium complexes as sensitizers. In particular, several kinds of measurements have been performed to study the electrical performances and the efficiency levels of the cells at different operating conditions. In detail, the measurements have been conducted at varying temperatures and hours of light soaking. Our results show that the short circuit current density J SC , the open circuit voltage V OC and the conversion efficiency η increase with the hours of light soaking, while they decrease with temperature. A thorough investigation on the light soaking process at the …
Organic Dye Bearing Asymmetric Double Donor-π-Acceptor Chains for Dye-Sensitized Solar Cells
2011
A novel efficient metal free sensitizer containing asymmetric double donor-π-acceptor chains (DC) was synthesized for dye-sensitized solar cells (DSSCs). Comparing to 3.80%, 4.40% and 4.64% for the DSSCs based on the dyes with single chain (SC1, SC2) and cosensitizers (SC1 + SC2), the overall conversion efficiency reaches 6.06% for DC-sensitized solar cells as a result of its longer electron lifetime and higher incident monochromatic photon-to-current conversion efficiency.
Azatruxene‐Based, Dumbbell‐Shaped, Donor–π‐Bridge–Donor Hole‐Transporting Materials for Perovskite Solar Cells
2020
Three novel donor-π-bridge-donor (D-π-D) hole-transporting materials (HTMs) featuring triazatruxene electron-donating units bridged by different 3,4-ethylenedioxythiophene (EDOT) π-conjugated linkers have been synthesized, characterized, and implemented in mesoporous perovskite solar cells (PSCs). The optoelectronic properties of the new dumbbell-shaped derivatives (DTTXs) are highly influenced by the chemical structure of the EDOT-based linker. Red-shifted absorption and emission and a stronger donor ability were observed in passing from DTTX-1 to DTTX-2 due to the extended π-conjugation. DTTX-3 featured an intramolecular charge transfer between the external triazatruxene units and the azo…
Size-dependent electron transfer from atomically defined nanographenes to metal oxide nanoparticles.
2020
Atomically defined nanographenes (NGs) feature size-dependent energy gaps induced by, and tuneable through, quantum confinement. Their energy-tunability and robustness make NGs appealing candidates as active elements in sensitized geometries, where NGs functionalize a metal oxide (MO) film with large-area-to-volume ratio. Despite the prominent relevance of NG/MO interfaces for developing novel architectures for solar energy conversion, to date, little information is available regarding the fundamentals of electron transfer (ET) processes taking place from NG donors to MO acceptors. Here, we analyze the interplay between the size of atomically precise NGs and ET dynamics at NG/MO interfaces.…
Synthesis and characterization of zinc carboxy–porphyrin complexes for dye sensitized solar cells
2018
Two zinc porphyrins, 2 and 8, have been synthesized. Porphyrin 8 displays better electronic communication between the dye and the TiO2 electrode. Photophysical measurements and electrochemistry experiments suggest that both porphyrins are very promising sensitizers for dye-sensitized solar cells (DSSCs). It was found that their molecular orbital energy levels favor electron injection and dye regeneration in DSSCs. Solar cells sensitized by 2 and 8 were fabricated, and it was found that they show power conversion efficiencies (PCEs) of 5.27% and 7.13%, respectively. Photovoltaic measurements (J–V curves) together with the incident photon-to-electron conversion efficiency spectra of the two c…
Design, assembly and characterization of silicide-based thermoelectric modules
2016
ID: 1143 In: Energy conversion and management, 13-21. Summary: Highlights•Novel silicide-based thermoelectric modules were experimentally investigated.•The modules produced high power of 1.04 W at 405 °C and 3.24 W at 735 °C.•An estimated module efficiency of 5.3% represent the highest reported for silicide systems.AbstractSilicides have attracted considerable attention for use in thermoelectric generators due mainly to low cost, low toxicity and light weight, in contrast to conventional materials such as bismuth and lead telluride. Most reported work has focused on optimizing the materials properties while little has been done on module testing. In this work we have designed and tested mod…