Search results for "FAC"
showing 10 items of 36366 documents
Impact of accumulated dust particles' charge on the photovoltaic module performance
2016
Abstract This work is focused on analysing effect of accumulated dust particles' charge on PV module performance. In the Dundee University's laboratory, dust particles have been created through epoxy powder and charged by using corona and tribo-electric charging methods by varying the charge levels of the accumulated dust particles. The PV module output has analysed for finding a relation between charge levels of the accumulated dust particles and its output voltage. Obtained experimental results have shown that charge level of accumulated dust particles on PV module's have significant impact on its output and dust particle accumulations are not associated with panel tilt angle.
Sewage sludge as cheap alternative to microalgae as feedstock of catalytic hydrothermal liquefaction processes
2019
Abstract Production of biocrude through hydrothermal liquefaction (HTL) of sewage sludge (SS) and Chlorella vulgaris was investigated. NiMo/Al2O3 (KF 851), CoMo/Al2O3 (KF 1022) and activated carbon felt, tested as catalysts at 598 K for 30 min, did not change the biocrude yield but significantly improved its quality. Quantitative sulfur removal and lower oxygen content were found in biocrude when KF 851 and KF 1022 were used with C. vulgaris. The same catalysts decreased O/C and S/C ratio of the biocrude from SS. The highest HHV (38.19 MJ/kg) and H/C ratio (1.65) and the lowest O/C (0.11) of the biocrude from SS were obtained with the cheaper activated carbon felt. A new product phase, prob…
Effect of torrefaction on properties of pellets produced from woody biomass
2020
Torrefaction has been recognized as a promising strategy to improve handling and storage properties of wood-based pellets, thus producing a uniform-quality commodity with high energy density and hydrophobicity. In this work, pellets produced from spruce stem wood, bark, and forest residues were torrefied in a bench-scale tubular reactor at 225 and 275 °C with two residence times (30 and 60 min). The effects of torrefaction on general properties, grindability, mechanical properties, hydrophobicity, and microstructure of the studied pellets were investigated. The increase of torrefaction severity reduced mass yields, but the heating values and the fixed carbon content of the torrefied pellets…
Renewable energy growth and the financial performance of electric utilities: A panel data study
2017
Electric utilities are under pressure to increase clean energy production. Although the adoption of renewable energy can improve the utilities' environmental performance, a fundamental question is if it also pays in economic terms. Building on the natural-resource-based view of the firm, we answer this question using two data analysis methods. First, we carry out a regression analysis of panel data from 66 large electric utilities covering the period 2005–2014, applying both a fixed and random effects estimator. Subsequently, we use the Granger causality test to explore possible causality links. Our results show a negative correlation at the firm level between renewable energy increase and …
“Natural wine” consumers and interest in label information: An analysis of willingness to pay in a new Italian wine market segment
2019
Abstract Increasing public attention to issues of health and environmental sustainability has contributed to a growing consumer demand for “natural” food and drinks. As has been observed, this trend has also affected the wine market, leading to the spread of so-called “natural wine”. According to the literature, consumers who are aware of the social and environmental impact of their consumption choices pay more attention to the information displayed on the label as a tool to reduce the risk associated with their purchase. This study seeks to identify which consumers are willing to pay for natural wine and to understand what information on the label influences their choice. This study is one…
From lab to industry: Scaling up green geopolymeric mortars manufacturing towards circular economy
2021
Abstract Construction is nowadays considered an extremely energy intensive industry and one of the main sources of environmental pollution in the world. Therefore, the research and the development of novel energy-saving manufacturing processes and sustainable construction materials is more than ever urgent and challenging. This paper aims at identifying the industrial process for the production of novel geopolymers to be used as a greener substitute for cement, especially the Portland one, widely used for structural applications to significantly reduce the environmental impact of the construction industry. Here, the materials sustainability and the manufacturing process are improved by valo…
Reviewing the role of ecosystems services in the sustainability of the urban environment: A multi-country analysis
2020
The urban environment is characterised by many pressures caused by population growth, transport (and its related emissions), and the damage to green areas. Yet, there is a variety of ecosystem services available in urban areas, which may be deployed to ameliorate the current problems and foster their sustainability. This paper reviews the role of ecosystem services as tools for sustainability, based on an urban setting. It also describes a series of multi-country case studies, where an assessment of their functions using a set of benefits valuation approaches such as health benefits, economic benefits, social benefits and benefits to climate resilience, are provided, along with an appraisal…
Evaluating the material resource efficiency of secondary aluminium production: A Monte Carlo-based decision-support tool
2019
The contamination of aluminium streams during the different life cycle stages by alloy mixing and/or accumulation of foreign elements, in combination with the limited melt purification options during remelting, represents an important limiting factor in recycling. Consequently, in secondary aluminium production, primary aluminium is used to dilute the concentration of the residual elements, and alloying elements are added to adjust the composition to the target alloy specifications. However, adding elements, for which their refinement in a subsequent recycling step is problematic, results in permanent down-cycling or ‘quality losses’. Hence, it is crucial to more efficiently control the com…
Heavy metal uptake by plants from wastewater of different pulp concentrations and contaminated soils
2021
There is a lack of information on the extent of mineral extraction by plants from wastewater in arid and semi-arid environments in developing countries. This research assesses the performance of Alhagi and Mallow plant species for the absorption of heavy metals around the tailings dam of a copper mine in Iran. The industrial wastewater, known as the pulp, from the copper mine site has different concentrations of heavy metals. In a laboratory setting the plants were cultivated and irrigated with different pulp concentrations (0, 20, 40, 60, 80, and 100%) in water. Heavy metals (chromium, manganese, cadmium, and lead) accumulation in the aerial parts and roots of the plants, and the in-situ s…
Modeling the natural gas supply chain for sustainable growth policy
2020
Abstract Natural gas has been used globally as a transitional fuel for supporting a green-energy-supply strategy, which has been questioned for the intermittence and lack of reliability of renewables. This paper proposes a System Dynamics model for assessing alternative security of supply policy along the natural gas value chain. The model incorporates demand, transport, production and reserves of natural gas variables according to a systemic perspective. It also includes a module for evaluating the effect of natural gas price on the demand and supply levels, respectively. Alternative supply policies are evaluated under different scenarios. The chosen case-study focuses on the Colombian nat…