Search results for "IMPIANTI"
showing 10 items of 797 documents
Analysis of the thermo-mechanical behaviour of the DEMO Water-Cooled Lithium Lead breeding blanket module under normal operation steady state conditi…
2015
Within the framework of DEMO R&D activities, a research cooperation has been launched between ENEA, the University of Palermo and CEA to investigate the thermo-mechanical behaviour of the outboard equatorial module of the DEMO1 Water-Cooled Lithium Lead (WCLL) blanket under normal operation steady state scenario. The research campaign has been carried out following a theoretical-computational approach based on the Finite Element Method (FEM) and adopting a qualified commercial FEM code. In particular, two different 3D FEM models (Model 1 and Model 2), reproducing respectively the central and the lateral poloidal-radial slices of the WCLL blanket module, have been set up. A particular attent…
On the thermal and thermomechanical assessment of the “Optimized Conservative” helium-cooled lithium lead breeding blanket concept for DEMO
2018
Abstract Within the framework of EUROfusion R&D activities a research campaign has been performed at CEA-Saclay, in close collaboration with the University of Palermo, in order to investigate thermal and thermomechanical performances of the “Optimized Conservative” concept of DEMO Helium-Cooled Lithium Lead breeding blanket (HCLL). Attention has been paid to the HCLL outboard equatorial module (OEM) when subjected to the steady state nominal loading scenario. To this purpose three simplified 3D models, characterized by an increasing level of detail, have been set-up taking into account, firstly, a single radial-toroidal slice, then a basic module geometric unity composed by two adjacent sli…
Ascorbic Acid determination using linear sweep voltammetry on flexible electrode modified with gold nanoparticles and reduced graphene oxide
2020
Indium tin oxide (ITO) coated on flexible polyethylene terephthalate (PET) substrate electrode was modified with reduced graphene oxide and gold nanoparticles by simple co-electrodeposition performed at -0.8 V vs SCE for 200 s. All samples were characterized by electron scan microscopy. The as prepared electrode was used as electrochemical sensor to selective detection of ascorbic acid using linear sweep voltammetry. Excellent results were obtained in a linear range from 20 to 150 µM of ascorbic acid with a limit of detection of about 3.1 µM (S/N=3.3). The sensors have a reproducibility of about 5.5% and also show high selectivity towards different interferents such as chlorine, calcium, ma…
Ni alloy nanowires as high efficiency electrode materials for alkaline electrolysers
2021
Abstract The fabrication and characterization of nickel-alloy electrodes for alkaline electrolysers is reported. Three different alloys (Ni–Co, Ni–Zn and Ni–W) at different composition were studied in order to determine the optimum condition. Nanostructured electrodes were obtained by template electrodeposition into a nanoporous membrane, starting from aqueous solution containing the two elements of the alloy at different concentrations. Composition of alloys can be tuned by electrolyte composition and also depends on the difference of the redox potential of elements and on the presence of complexing agents in deposition bath. Electrochemical and electrocatalytic tests, aimed at establishin…
Nanostructured Ni–Co alloy electrodes for both hydrogen and oxygen evolution reaction in alkaline electrolyzer
2021
Abstract Ni–Co alloy nanostructured electrodes with high surface area were investigated both as a cathode and anode for an alkaline electrolyzer. Electrodes were obtained by template electrosynthesis at room temperature. The electrolyte composition was tuned in order to obtain different NiCo alloys. The chemical and morphological features of nanostructured electrodes were evaluated by EDS, XRD and SEM analyses. Results show that electrodes with different composition of Ni and Co, made of nanowires well anchored to the substrate, were obtained. For both hydrogen and oxygen evolution reactions, electrochemical and electrocatalytic tests, performed in 30% w/w KOH aqueous solution, were carried…
Modeling of ITER TF cooling system through 2D thermal analyses and enthalpy balance
2017
Abstract The winding pack of the ITER Toroidal Field (TF) coils is composed of 134 turns of Nb3Sn Cable in Conduit Conductor (CICCs) wound in 7 double pancakes and cooled by supercritical helium (He) at cryogenic temperature. The cooling of the Stainless Steel (SS) case supporting the winding pack is guaranteed by He circulation in 74 parallel channels. A 2D approach to compute the temperature distribution in the ITER TF winding pack is here proposed. The TF is divided in 32 poloidal segments, for each segment the corresponding 2D model is built and a thermal analysis is performed applying the corresponding nuclear heating computed with MCNP code considering the latest design updates, such …
On the thermal-hydraulic performances of the DEMO divertor cassette body cooling circuit equipped with a liner
2020
Abstract In the framework of the Work Package DIV 1 - “Divertor Cassette Design and Integration” of the EUROfusion action, a research campaign has been jointly carried out by University of Palermo and ENEA to investigate the steady-state thermal-hydraulic performances of the DEMO divertor cassette cooling system. The research activity has been focussed onto the most recent design of the Cassette Body (CB) cooling circuit, consistent with the DEMO baseline 2017 and equipped with a liner, whose main function is to protect the underlying vacuum pump CB opening from plasma radiation. The research campaign has been carried out following a theoretical-computational approach based on the finite vo…
Thermal-hydraulic study of the DEMO divertor cassette body cooling circuit equipped with a liner and two reflector plates
2021
Abstract In the framework of the Work Package DIV 1 – “Divertor Cassette Design and Integration” of the EUROfusion action, a research campaign has been jointly carried out by University of Palermo and ENEA to investigate the steady-state thermal-hydraulic performances of the DEMO divertor cassette cooling system. The research activity has been focussed onto the most recent design of the Cassette Body (CB) cooling circuit, consistent with the DEMO baseline 2017 and equipped with a liner and two Reflector Plates (RPs), whose main functions are to protect the underlying vacuum pump hole from the radiation arising from plasma and shield the PFCs inlet distributors, respectively. The research ca…
Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement
2017
Abstract Within the framework of EUROfusion R&D activities, CEA-Saclay has carried out an investigation of the thermal and mechanical performances of alternative designs intended to enhance the Tritium Breeding Ratio (TBR) of the Helium-Cooled Lithium Lead (HCLL) Breeding Blanket (BB) for DEMO. Neutronic calculations performed on the 2014 DEMO HCLL baseline predicted a value of TBR equal to 1.07, lower than the required value of 1.1, necessary to ensure the tritium self-sufficiency of the breeding blanket taking into account uncertainties. In order to reach the TBR target, the strategy of the steel amount reduction inside the HCLL module breeding zone (BZ) has been followed by suppressing s…
On the effect of stiffening plates configuration on the DEMO Water Cooled Lithium Lead Breeding Blanket module thermo-mechanical behaviour
2019
Abstract Within the framework of the pre-conceptual design of the EU-DEMO Breeding Blanket (BB) supported by EUROfusion action, results of the research activities carried out in the last years have highlighted that changes in the proposed Water Cooled Lithium Lead (WCLL) BB design have to be considered, especially as to the liquid breeder circulation path within the BB module. Therefore, in view of the definition of a final WCLL BB module layout, a parametric campaign of numerical analyses has been carried out at the University of Palermo in order to assess the impact of different SPs configurations on the module thermo-mechanical performances. To this purpose, attention has been focussed o…