Search results for "Metallurgy"
showing 10 items of 1419 documents
Tritium release from breeding blanket materials in high magnetic field
2007
Abstract Under the operating conditions of a fusion reactor, the blanket materials: ceramic and Be pebbles will be at a high temperature (up to 1123 K), under action of intense radiation (up to 10 19 n m −2 s −1 ) and magnetic field (MF) up to 7–10 T. In order to introduce action of radiation and MF in post-irradiation investigations of the tritium release from the blanket materials, a special rig for thermo-annealing of pre-irradiated samples at a high temperature up to 1120 K under irradiation with fast electrons of 5 MeV and dose rate 14 MGy/h in MF up to 1.7 T was used for this study. A delay of the tritium release in MF of 2.4 T at thermo-annealing of the lithium orthosilicate Li 4 S…
Shape memory NiTi thin films deposited at low temperature
1999
Abstract NiTi shape memory alloy (SMA) thin films have the potential to become high performance actuators for micro-electromechanical systems. Low temperature crystallized NiTi films would ensure a good compatibility with microelectronic processes and polymers. To avoid the drawbacks induced by annealing, we have tried to obtain low temperature crystallized RF sputtered NiTi films by optimising deposition parameters. We have found that NiTi films containing an excess of Ti (∼52%) were crystallized when deposited on Si(100) substrates heated up to only 473 K. NiTi/Si(n) Schottky diodes I–V characteristics showed a temperature dependence indicating structural transition in the NiTi electrode.…
Photocatalytic printing of inorganic nanopatterns via poly(styrene-block-carbosilane) copolymer thin films on titania substrates.
2009
Well-defined, ordered arrays of nanoscale depressions were obtained in linear-brush-type polystyrene-block-polycarbosilane (PS-b-PCS) diblock copolymer thin films by acetone vapor annealing and silica nanodot arrays were directly obtained from such thin films deposited on a titania substrate by one-step exposure to UV light as a result of transformation of the PCS units to silica, driven by the photocatalytic activity of titania concurrent with removal of the organic matrix.
Highly textured Gd2Zr2O7 films grown on textured Ni-5at.%W substrates by solution deposition route: Growth, texture evolution, and microstructure dep…
2012
Abstract Growth, texture evolution and microstructure dependency of solution derived Gd 2 Zr 2 O 7 films deposited on textured Ni-5 at.%W substrates have been extensively studied. Influence of processing parameters, in particular annealing temperature and dwell time, as well as thickness effect on film texture and morphology are investigated in details. It is found that a rotated cube-on-cube epitaxy of Gd 2 Zr 2 O 7 //NiW in-plane texture forms as soon as the (004) out-plane texture appears, implying that epitaxial growth dominates the crystallization processes. Thermal energy plays an important role in minimizing the difference of interfacial energy along two directions in the anisotropic…
Low-temperature atomic layer deposition of ZnO thin films: Control of crystallinity and orientation
2011
Abstract Low-temperature atomic layer deposition (ALD) processes are intensely looked for to extend the usability of the technique to applications where sensitive substrates such as polymers or biological materials need to be coated by high-quality thin films. A preferred film orientation, on the other hand, is often required to enhance the desired film properties. Here we demonstrate that smooth, crystalline ZnO thin films can be deposited from diethylzinc and water by ALD even at room temperature. The depositions were carried out on Si(100) substrates in the temperature range from 23 to 140 °C. Highly c-axis-oriented films were realized at temperatures below ~ 80 °C. The film crystallinit…
CEMS Study of 57Fe Implanted in Diamond
2002
Conversion electron Mossbauer (CEMS) measurements have been made on a diamond sample implanted with 70 keV 57Fe to a dose of 5 × 1014 cm−2. CEMS spectra were collected in the as-implanted state and after annealing the diamond up to 1470 K. The lower temperature spectra were consistently fitted with three symmetric doublets. With annealing the areal fractions of two of the doublets increased to 44% and 48 %, respectively, while that of the third doublet decreased to be replaced by a single line component with isomer shift δ = 0.0 mm/s. Comparison of the observed isomer shifts with recent in-beam Mossbauer measurements and theoretical calculations allow us to attribute the singlet to intersti…
Au nanowire junction breakup through surface atom diffusion.
2018
Metallic nanowires are known to break into shorter fragments due to the Rayleigh instability mechanism. This process is strongly accelerated at elevated temperatures and can completely hinder the functioning of nanowire-based devices like e.g. transparent conductive and flexible coatings. At the same time, arranged gold nanodots have important applications in electrochemical sensors. In this paper we perform a series of annealing experiments of gold and silver nanowires and nanowire junctions at fixed temperatures 473, 673, 873 and 973 K (200 degrees C, 400 degrees C, 600 degrees C and 700 degrees C) during a time period of 10 min. We show that nanowires are especially prone to fragmentatio…
Sub-gap defect density characterization of molybdenum oxide: An annealing study for solar cell applications
2020
AbstractThe application of molybdenum oxide in the photovoltaic field is gaining traction as this material can be deployed in doping-free heterojunction solar cells in the role of hole selective contact. For modeling-based optimization of such contact, knowledge of the molybdenum oxide defect density of states (DOS) is crucial. In this paper, we report a method to extract the defect density through nondestructive optical measures, including the contribution given by small polaron optical transitions. The presence of defects related to oxygen-vacancy and of polaron is supported by the results of our opto-electrical characterizations along with the evaluation of previous observations. As part…
Influence of Anodic and Thermal Barrier Layers on Physicochemical Behavior of Anodic TiO2 Nanotubes
2011
Electrochemical and photo-electrochemical behavior of self-organized TiO2 nanotubes formed in organic solvents have been studied by taking into account the formation of new barrier layers beneath nanotubes either due to the anodic polarization in aqueous solutions or air exposure during high temperature annealing. It has been shown that before annealing, electrochemical and photoelectrochemical answers are dominantly controlled by the physicochemical properties of the anodic barrier layer. Annealing in air at sufficiently high temperatures changes the initial amorphous structure of as-prepared nanotubes and forms a new oxide layer below them due to thermal oxidation of underneath titanium. …
THz nanocrystal acoustic vibrations from ZrO2 3D supercrystals
2013
International audience; We report sharp low-frequency Raman spectral features of supercrystals synthesized via the "benzyl alcohol route" and consisting of either yttrium-stabilized or pure zirconia (ZrO2) nanocrystals. In situ formed benzoate species control the nanocrystal growth and act as organic glue leading to the assembly of the nanocrystals in highly ordered 3D supercrystals. We attribute some Raman peaks to THz acoustic vibrations of individual nanocrystals which are only weakly coupled due to the strong acoustic mismatch between the capping ligands and the nanocrystals. Peak positions are consistent with nanocrystal sizes estimated from transmission electron microscopy and X-ray p…