Search results for "Toe"
showing 10 items of 3824 documents
Filamentation-induced spectral broadening and pulse shortening of infrared pulses in Tellurite glass
2016
Abstract Filamentation of infrared femtosecond pulses in Tellurite glass is reported, leading to the generation of a supercontinuum generation spanning from the visible up to 4 μm. The angular distribution of the supercontinuum shows clear evidence of conical waves generation, in particular, in the visible region. Moreover, taking advantage of the spatio-temporal self-focusing effect occurring in the Tellurite glass, a twofold pulse shortening is demonstrated. Tellurite glass appears as a very convenient, versatile and promising medium for femtosecond nonlinear optics in the infrared region.
XPS study of pumice-supported palladium and platinum catalysts
1992
An XPS study has been performed on samples of monometallic of palladium and platinum and on bimetallic Pd-Pt catalysts supported on pumice. A negative shift of about 0.5 eV in the Pd 3d and Pt 4f binding energies of the catalysis relative to the energies of the same levels in the pure metals suggested an increase in the electron density in both metals. A quantitative XPS analysis indicated that the supported metals did not modify the surface atomic composition of pumice
H2-TPR, XPS and TEM Study of the Reduction of Ru and Re promoted Co/γ-Al2O3, Co/TiO2 and Co/SiC Catalysts
2016
<p class="1Body">Effects of Ru and Re promoters on Co-CoO<sub>x </sub>catalysts supported on γ-Al<sub>2</sub>O<sub>3</sub>, TiO<sub>2</sub> and SiC were investigated to improve the understanding of the role of promoters of the active phase of Co-CoO<sub>x</sub>-Ru and Co-CoO<sub>x</sub>-Re. The influence of promoter addition on the composition and activity of the catalysts was characterized by several methods, such as H<sub>2</sub>-TPR, XPS, chemisorption and TEM. Furthermore, the role of support and metal-support interaction was especially studied and different support materials were compared.</p&g…
Support effect on the structure and CO oxidation activity of Cu-Cr mixed oxides over Al2O3 and SiO2
2009
Abstract Cu-Cr based catalysts supported on silica and alumina with 5 wt% total loading of (CuO + Cr2O3), in different molar ratios, were prepared by wet impregnation. The samples were studied by nitrogen adsorption isotherms (BET), temperature-programmed reduction (TPR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Their catalytic activity was tested in the CO oxidation reaction. Different structures were obtained in dependence of the support, the atomic ratio and the calcination temperature. In particular, whereas on Al2O3 there was no experimental evidence for interaction between Cu and Cr, over the silica supported systems formation of new phases CuCr2O4 and CuCrO…
A photoemission study of molybdenum hexacarbonyl adsorption and decomposition on TiO2(110) surface.
2007
International audience; The adsorption and decomposition of molybdenum hexacarbonyl on (110) TiO2 surfaces were studied using both core levels and valence band photoemission spectroscopies. It was found that after an adsorption at 140 K, when going back to room temperature, only a small part of molybdenum compounds, previously present at low temperature, remained on the TiO2 surface. This indicates that the desorption temperature on such a surface is lower than the decomposition one. The use of photon irradiation to decompose the hexacarbonyl molecule was also studied. It was shown that during such a decomposition molecular fragments were chemisorbed on the surface allowing a higher amount …
Functionalization of Silver Nanowires Surface using Ag–C Bonds in a Sequential Reductive Method
2015
Silver nanowires (Ag-NW) assembled in interdigitated webs have shown an applicative potential as transparent and conducting electrodes. However, upon integration in practical device designs, the presence of silver oxide, which instantaneously forms on the Ag-NW surfaces in ambient conditions, is unwanted. Here, we report on the functionalization of Ag-NWs with 4-nitrophenyl moieties through A-C bonds using a versatile two step reduction process, i.e., ascorbate reduction combined electrografting. We show that 40% of the Ag atop sites were terminated and provide high surface stability toward oxidation for more than 2 months while keeping the same intrinsic conductivity as in bulk silver.
Structural and optical properties of Fe and Zn substituted CuInS2 nanoparticles synthesized by a one-pot facile method
2015
We substitute indium present in the CuInS2 ternary compound by iron and zinc using a facile one-pot synthesis method. The quaternary compound of CuIn1−xMxS2 (M = Fe and Zn) was synthesized by dissolving CuCl, InCl3, FeCl3, Zn(ac)2 and SC(NH2)2 as precursors in 1-octadecene, oleylamine and oleic acid as non-coordinating, coordinating and capping agent solvents, respectively. Oleic acid, oleylamine and thiourea were used respectively as a hard Lewis base, borderline Lewis base (in comparison with oleic acid) and soft Lewis base to form appropriate complexes. The complex formation, structure, and optical properties of CuIn1−xMxS2 (M = Fe and Zn) nanoparticles were studied by Fourier transform …
Organic Heterojunction Devices Based on Phthalocyanines: A New Approach to Gas Chemosensing.
2020
Organic heterostructures have emerged as highly promising transducers to realize high performance gas sensors. The key reason for such a huge interest in these devices is the associated organic heterojunction effect in which opposite free charges are accumulated at the interface making it highly conducting, which can be exploited in producing highly sensitive and faster response kinetics gas sensors. Metal phthalocyanines (MPc) have been extensively studied to fabricate organic heterostructures because of the large possibilities of structural engineering which are correlated with their bulk thin film properties. Accordingly, in this review, we have performed a comprehensive literature surve…
Monolithic integration of Giant Magnetoresistance (GMR) devices onto standard processed CMOS dies
2014
Giant Magnetoresistance (GMR) based technology is nowadays the preferred option for low magnetic fields sensing in disciplines such as biotechnology or microelectronics. Their compatibility with standard CMOS processes is currently investigated as a key point for the development of novel applications, requiring compact electronic readout. In this paper, such compatibility has been experimentally studied with two particular non-dedicated CMOS standards: 0.35 μm from AMS (Austria MicroSystems) and 2.5 μm from CNM (Centre Nacional de Microelectrònica, Barcelona) as representative examples. GMR test devices have been designed and fabricated onto processed chips from both technologies. In order …
Dispersion-optimized multicladding silicon nitride waveguides for nonlinear frequency generation from ultraviolet to mid-infrared
2016
Nonlinear frequency conversion spanning from the ultraviolet to the mid-infrared (beyond 2.4 μm) is experimentally demonstrated in multicladding silicon nitride (𝑆𝑖𝑋𝑁𝑌) waveguides. By adjusting the waveguide cross-section the chromatic dispersion is flattened, which enhances both the efficiency and the bandwidth of the nonlinear conversion. How accurately the dispersion is tailored is assessed through chromatic dispersion measurements and an experiment/simulation comparison of the dispersive waves' wavelength locations. Undesirable fluctuations of both the refractive index and the dimensions of the waveguide during the fabrication process result in a dispersion unpredictability of at l…