Search results for "USP"
showing 10 items of 1290 documents
Fourth-order cascaded Raman shift in AsSe chalcogenide suspended-core fiber pumped at 2 μm
2011
International audience; Cascaded Raman wavelength shifting up to the fourth order ranging from 2092 to 2450nm is demonstrated using a nanosecond pump at 1995nm in a low-loss As38Se62 suspended-core microstructured fiber. These four Stokes shifts are obtained with a low peak power of 11W, and only 3W are required to obtain three shifts. The Raman gain coefficient for the fiber is estimated to (1.6 +-0.5)x 10e−11 m/W at 1995nm. The positions and the amplitudes of the Raman peaks are well reproduced by the numerical simulations of the nonlinear propagation.
Reflection-refraction effects on light distribution inside tubular photobioreactors
2017
One of the main parameters affecting autotrophic algae cultures is photon absorption distribution inside the photobioreactor. This clearly depends on the geometry of both the radiation source and the photobioreactor, as well as on algae suspension optical properties. In this work the local volumetric rate of photon absorption LVRPA in a cross-section of a horizontal-pipe photobioreactor was investigated by means of simplified Monte Carlo simulations. In particular, the fate of a number of photons perpendicularly hitting the photobioreactor circular section was simulated in relation to different values of algae concentration. The model takes into account refraction/reflection phenomena at th…
Numerical Reconstruction of Porous Architecture for Suspension Plasma Sprayed Coatings
2021
Abstract The porous architecture of coatings has a significant influence on the coating performances and thus should be properly designed for the intended applications. For simulating the coating properties, it is necessary to determine the numerical representation of the coating microstructure. In this study, YSZ coatings were manufactured by suspension plasma spray (SPS). Afterwards, the porous architecture of as-prepared coatings was investigated by the combination of three techniques, imaging analysis, Ultra Small Angle X-ray Scattering (USAXS), and X-ray transmission. A microstructural model for reconstructing the porous architecture of the SPS coating was subsequently computed accordi…
Online measurement of floc size, viscosity, and consistency of cellulose microfibril suspensions with optical coherence tomography
2021
AbstractIn this study, cellulose microfibril (CMF) suspensions were imaged during pipe flow at consistencies of 0.4%, 1.0%, and 1.6% with optical coherence tomography (OCT) to obtain images of the structure and the local velocity of the suspension. The viscosities obtained by combining pressure loss measurement with the OCT velocity data showed typical shear thinning behavior and were in excellent agreement with viscosities obtained with ultrasound velocity profiling. The structural OCT images were used to calculate the radial and the axial floc sizes of the suspension. A fit of power law to the geometrical floc size–shear stress data gave the same power law index for all consistencies, sug…
Influence of Rotor Suspension Anisotropy on Oil Film Instability
2018
A crucial problem of turbomachinery is the oil film instability on increasing the angular speed, which is correlated with the asymmetry of the bearing stiffness matrix and resembles the hysteretic instability somehow. As a beneficial effect is exerted on the latter by the anisotropy of the support stiffness, some favorable effects have been recently found by the author also for the former, whence a systematic analysis has been undertaken. The instability thresholds may be detected by the usual conventional methods, but a detailed analysis may be carried out by closed-form procedures in the hypothesis of symmetry of the rotor-shaft-support system, which condition approaches the real working …
Characterization of micro-fibrillated cellulose fiber suspension flow using multi scale velocity profile measurements
2017
Rheological properties and boundary layer flow behavior of Micro Fibrillated Cellulose (MFC) suspended in water was studied using a novel velocity profiling rheometric technique. The method is based on measuring stationary velocity profiles of fluid flow in a straight tube simultaneously by Doppler Optical Coherence Tomography (DOCT) and by Ultrasound Velocity Profiling (UVP). The high resolution DOCT provides velocity profiles near the transparent tube wall, while UVP yields corresponding information in the interior parts of the flow. The data from the two instruments is combined into a comprehensive velocity profile including both the thin boundary layer near the wall and the interior par…
Incremental lines in root cementum of human teeth: an approach to their ultrastructural nature by microscopy.
1998
In ground sections of human teeth, root cementum shows under the light microscope as alternating, almost concentric, dark and light rings. In paleontology and forensic medicine, the number of these incremental lines or annulations is used to derive the age-at-death of the individual. To find the ultrastructural features underlying these cemental annulations, we used bright-field light microscopy (LM), confocal laser scanning microscopy (CLSM), transmission electron microscopy (TEM), and electron-dispersive x-radiation (EDX) in a scanning electron microscope (SEM). Annulations visible in ground sections of about 100-μm thickness were no longer visible in semi-thin sections (thickness, 1-2 μ…
Experiments and CFD Predictions of Solid Particle Distribution in a Vessel Agitated with Four Pitched Blade Turbines
2001
The distribution of solid particles in a high aspect-ratio baffled tank agitated with four 45° pitched blade turbines (PBT) was investigated using both experimental measurements and CFD simulations. Dilute suspensions of glass beads in water and moderately viscous liquids were considered. The measurement of axial particle concentration profiles was conducted by means of a light attenuation technique. Fully predictive simulations of solid-liquid suspensions were performed using a Sliding-Grid approach coupled with the Eulerian-Eulerian Two Fluid Model and the ‘homogeneous’ two-phase k-ɛ turbulence model. The simulated particle axial concentration profiles were compared with the experimental …
Particle suspension in top-covered unbaffled tanks
2010
Abstract Unbaffled stirred tanks are seldom employed in the process industry as they are considered poorer mixers than baffled vessels. However, they may be expected to provide significant advantages in a wide range of applications (e.g. crystallization, food and pharmaceutical processes, etc.), where the presence of baffles is often undesirable. In the present work solid–liquid suspension in an unbaffled stirred tank is investigated. The tank was equipped with a top-cover in order to avoid vortex formation. A novel experimental method (the “steady cone radius method”, SCRM) is proposed to determine experimentally the minimum impeller speed at which solids are completely suspended. Experime…
Roentgenographic in vitro investigation of frequency and location of curvatures in human maxillary premolars.
2006
The aim of this study was to determine the location of the root canal curvature and measure the distance from the CEJ to the first curvature using in vitro methods. Extracted maxillary premolars (n = 358) were fixed and digitally radiographed using the parallel technique. Excluded from further analysis were teeth with root caries, artificial crowns, extensive fillings, or endodontic treatments. The results were descriptively analyzed and the cumulative frequencies were calculated. The median values of the distance between CEJ and first curvature were for the first right premolars 8.4 mm (buccal) and 8.5 mm (palatal), for the first left premolars 9.1 mm (buccal) and 8.9 mm (palatal). The med…