Search results for "mortar"
showing 10 items of 99 documents
Characterization of hydraulic mortars by means of simultaneous thermal analysis
2008
The properties of hydraulic mortars were studied by means of simultaneous thermal analysis (STA), according to a procedure proposed in the literature. Hydraulic limes, cement and/or slaked lime were mixed using different proportions of both inert and reactive aggregates, in order to test the effectiveness of such procedure in distinguishing the different degree of hydraulicity of such samples. The use of the normalized coordinates suggested in the literature results in overlapping of the clusters of different kinds of mortars. Modified coordinates are proposed, which give promising results in view of outlining a 'master curve' of hydraulicity.
Optimization of Radioactive Waste Cementation for Decommissioning of Salaspils Research Reactor
2011
This paper deals with information on the radioactive waste cementation technology for decommissioning of Salaspils Research Reactor (SRR). Dismantled and segmented radioactive materials were cemented in concrete containers using tritiated water-cement mixture. The viscosity of water-cement mortar, mechanical tests of solidified mortar’s samples, change of temperature of the samples during solidification time and long time leakage of 137Cs, 14C, 60Co and 3T radionuclides was studied for different water-cement compositions with additives. The pH and electro conductivity of the solutions during leakage tests were controlled. It was shown, that water/cement ratio significantly influences on wat…
Changes in Cement Paste and Mortar Fluidity after mixing induced by PCP: A parametric study
2006
International audience; The interaction mechanism between polycarboxylate-type superplasticizer (PCP) and cement hydration is not fully understood and incompatibilities between concrete and additive are sometimes observed. In some cases, the fluidity tends to increase (“overfluidification”) few minutes after mixing. This is a problem because the overfluidification leds to bleeding of the concrete which could be critical on job site. Our study consisted first in highlighting the phenomenon of “over-fluidification” by slump flow tests on mortar. Next, the time evolution of the rheological behaviour of cement pastes in the presence of PCP was analysed thanks to a rheometry protocol in order to…
Constitutive Models for the Tensile Behaviour of TRM Materials: Literature Review and Experimental Verification
2021
In recent years, the scientific community has focused its interest on innovative inorganic matrix composite materials, namely TRM (Textile Reinforced Mortar). This class of materials satisfies the need of retrofitting existing masonry buildings, by keeping the compatibility with the substrate. Different recent studies were addressed to improve the knowledge on their mechanical behaviour and some theoretical models were proposed for predicting the tensile response of TRM strips. However, this task is complex due to the heterogeneity of the constituent materials and the stress transfer mechanism developed between matrix and fabric through the interface in the cracked stage. This paper present…
Masonry Compressive Strength Prediction Using Artificial Neural Networks
2019
The masonry is not only included among the oldest building materials, but it is also the most widely used material due to its simple construction and low cost compared to the other modern building materials. Nevertheless, there is not yet a robust quantitative method, available in the literature, which can reliably predict its strength, based on the geometrical and mechanical characteristics of its components. This limitation is due to the highly nonlinear relation between the compressive strength of masonry and the geometrical and mechanical properties of the components of the masonry. In this paper, the application of artificial neural networks for predicting the compressive strength of m…
Alkali-activated mortars for sustainable construction material: effects of binder-to-aggregate ratio and curing conditions
2019
Valorisation and reuse of industrial wastes has become a worldwide compelling topic to improve the sustainability of processes and materials. This paper discusses an alternative way to recycle the biomass fly ash, generated by the kraft pulp industry, to manufacture novel geopolymeric mortars intended for applications in construction. Biomass fly ash was used as a raw material, in partial substitution of the commonly used metakaolin, natural siliceous sand as aggregate. The followed manufacture process is highly simple and reproducible. Various proportions binder to aggregate were tested to study the effect on the final mortars properties. The mortars mechanical resistance was also studied …
ALKALI-ACTIVATED MORTARS FOR SUSTAINABLE CONSTRUCTION MATERIAL: EFFECTS OF BINDER-TO- AGGREGATE RATIO AND CURING CONDITION
2019
Valorisation and reuse of industrial wastes has become a worldwide compelling topic to improve the sustainability of processes and materials. This paper discusses an alternative way to recycle the biomass fly ash, generated by the kraft pulp industry, to manufacture novel geopolymeric mortars intended for applications in construction. Biomass fly ash was used as a raw material, in partial substitution of the commonly used metakaolin, natural siliceous sand as aggregate. The followed manufacture process is highly simple and reproducible. Various proportions binder to aggregate were tested to study the effect on the final mortars properties. The mortars mechanical resistance was also studied …
INFLUENCE OF CORK POWDER GRAINSIZE IN THERMAL AND MECHANICAL PROPERTIES OF CORK-NHL MORTARS
2019
Cork is a unique material, characterized by small closed cell structures, high insulating properties, very low density, high fire resistance and a very good durability after simple thermal treatment. The main use of cork in the production of stopper and insulating panels obtained with cork grains and a polymeric resin. Usually cork grains used in panel production have a grainsize around 1-2 mm. In this work cork grains have been used as aggregates for natural hydraulic lime mortars by reducing grainsize distribution. Cork grainsize has been reduced by means of a knife mill and divided in three different distributions, i.e. 1, 0.5 and 0.25mm. Mortars have been prepared according to NHL to co…
Polymorphic Derivatives of NiII and CoII Mesocates with 3D Networks and “Brick and Mortar” Structures: Preparation, Structural Characterization, and …
2020
In this work we describe the preparation, spectroscopic, thermal and structural characterization, and cryomagnetic investigation of four new polymorphic derivatives of the [M2(H2mpba)3]2– mesocate ...
Mapping and holistic design of natural hydraulic lime mortars
2020
Supplementary data to this article can be found online at https://doi.org/10.1016/j.cemconres.2020.106167.