Search results for "signal processing"
showing 10 items of 2451 documents
Energy resolution and throughput of a new real time digital pulse processing system for x-ray and gamma ray semiconductor detectors
2013
New generation spectroscopy systems have advanced towards digital pulse processing (DPP) approaches. DPP systems, based on direct digitizing and processing of detector signals, have recently been favoured over analog pulse processing electronics, ensuring higher flexibility, stability, lower dead time, higher throughput and better spectroscopic performance. In this work, we present the performance of a new real time DPP system for X-ray and gamma ray semiconductor detectors. The system is based on a commercial digitizer equipped with a custom DPP firmware, developed by our group, for on-line pulse shape and height analysis. X-ray and gamma ray spectra measurements with cadmium telluride (Cd…
The role of atomic static displacements in binary-alloy formation
2003
Abstract A microscopic approach to considering the influence of local atomic static displacements (LASD) on binary alloy thermodynamic properties has been developed. The explicit expression for the free energy of a disordered alloy is derived within the collective variables method. The LASD are shown to promote formation of a disordered alloy. The theory is illustrated by numerical calculations performed for alloys of the Ca–Ba system. Dependence of the alloy formation heat on temperature and concentration obtained numerically agrees perfectly with the experimental data.
Pulsed-laser switching in the bistability domain of a cooperative spin crossover compound: a critical study through calorimetry
2015
The photoswitching from the low spin (LS) to high spin (HS) state and the reverse process in the bistability domain of spin crossover (SCO) compounds is a promising function to be used in molecular electronic devices, and evidenced mainly through spectroscopy. The phenomenon, and in particular its mechanism, is however still under debate since some controversial experimental results have been reported. Here we present a calorimetric experimental study of the photoswitching of the [Fe(pyrazine)Pt(CN)4] SCO material by a nanosecond-pulsed green laser. Our results confirm that the single laser pulse of varying energies results in significant LS to HS transformations and show that calorimetry p…
Progress in Violet Light-Emitting Diodes Based on ZnO/GaN Heterojunction
2020
Progress in light-emitting diodes (LEDs) based on ZnO/GaN heterojunctions has run into several obstacles during the last twenty years. While both the energy bandgap and lattice parameter of the two semiconductors are favorable to the development of such devices, other features related to the electrical and structural properties of the GaN layer prevent an efficient radiative recombination. This work illustrates some advances made on ZnO/GaN-based LEDs, by using high-thickness GaN layers for the p-region of the device and an ad hoc device topology. Heterojunction LEDs consist of a quasicoalesced non-intentionally doped ZnO nanorod layer deposited by chemical bath deposition onto a metal&ndash
Performance Study of Split Ferrite Cores Designed for EMI Suppression on Cables
2020
The ideal procedure to start designing an electronic device is to consider the electromagnetic compatibility (EMC) from the beginning. Even so, EMC problems can appear afterward, especially when the designed system is interconnected with external devices. Thereby, electromagnetic interferences (EMIs) could be transmitted to our device from power cables that interconnect it with an external power source or are connected to another system to establish wired communication. The application of an EMI suppressor such as a sleeve core that encircles the cables is a widely used technique to attenuate EM disturbances. This contribution is focused on the characterization of a variation of this cable …
Design of a 1 kW output power Folded Waveguide TWT operating in ka-band
2019
A Ka-band Serpentine Folded Waveguide Travelling Wave Tube (TWT) has been designed. The imposed design parameters values in terms of high power, high load, wide bandwidth, low weight, along with a structure manufactured with planar technique or by means of a micro milling process, have been obtained. Small signal simulations have been carried out with an in-house software for interaction impedance evaluation. The commercial electromagnetic simulation code CST Suite has been used for dispersion diagram prediction. An optimization of the one-dimensional software, normally used for large-signal simulation in coupled cavity TWTs (“Computer Program for Analysis of Coupled-cavity Travelling-wave-…
Band structure of indium selenide investigated by intrinsic photoluminescence under high pressure
2004
This paper reports on photoluminescence experiments in $n$-type indium selenide $(T=300\phantom{\rule{0.3em}{0ex}}\mathrm{K})$ under hydrostatic pressure up to 7 GPa at low and high excitation densities. Photoluminescence measurements at low excitation density exhibit a broad band around the energy of the direct band gap of $\mathrm{InSe}$ and with the same pressure dependence. The reversible increase of its linewidth above $1\phantom{\rule{0.3em}{0ex}}\mathrm{GPa}$ is associated to a direct-to-indirect band-gap crossover between valence band maxima. The reversible decrease of its intensity above $4\phantom{\rule{0.3em}{0ex}}\mathrm{GPa}$ is interpreted as evidence of a direct-to-indirect b…
Vacuum-ultraviolet absorption of amorphousSiO2: Intrinsic contribution and role of silanol groups
2008
We present a study on the vacuum-ultraviolet (VUV) absorption properties of amorphous ${\text{SiO}}_{2}$ $(a{\text{-SiO}}_{2})$ with high concentrations of silanol groups (Si-OH). We found that the absorption spectra are made up of a couple of exponential profiles. The first, in the range from $\ensuremath{\sim}7.5$ to $\ensuremath{\sim}8.1\text{ }\text{eV}$, was attributed to Si-OH group absorption, while the second, in the range from $\ensuremath{\sim}8.1$ to $\ensuremath{\sim}8.25\text{ }\text{eV}$, was ascribed to the intrinsic absorption. The VUV absorption cross section of Si-OH groups in $a{\text{-SiO}}_{2}$ was determined as well. The intrinsic absorption was found to be affected by…
Structural disorder and silanol groups content in amorphousSiO2
2009
We present a study on the features of the Urbach edge in amorphous silicon dioxide $(a{\text{-SiO}}_{2})$. The effects of temperature on the absorption edge in the range from 4 to 300 K were studied in both materials having negligible (dry, $l{10}^{17}\text{ }{\text{cm}}^{\ensuremath{-}3}$) and significant (wet, $g{10}^{19}\text{ }{\text{cm}}^{\ensuremath{-}3}$) silanol groups contents. Remarkable differences in the values and in the temperature dependence of the Urbach energy in the dry and wet samples were observed. These differences are interpreted as a consequence of a drastic reduction in the degree of disorder in wet materials, which turn out to be characterized by an electronic struc…
In vivo and in vitro effects of an Er:YAG laser, a GaAlAs diode laser, and scaling and root planing on periodontally diseased root surfaces: A compar…
2003
Background and Objectives The aim of the present histologic study was to compare the in vivo and in vitro effects of an erbium: yttrium, aluminum, and garnet (Er:YAG) laser (ERL), combined with a fluorescent calculus detection system, a diode laser (DL) and scaling and root planing (SRP) on periodontally diseased root surfaces. Study Design/Materials and Methods Twenty-four single rooted teeth, considered for extraction due to severe periodontal destruction, were included in the study. Prior to extraction all mesial root surfaces were randomly assigned to the following treatment groups: (1) ERL combined with a calculus detection system with fluorescence induced by 655 nm InGaAsP DL radiatio…