UV-Photoinduced Defects In Ge-Doped Optical Fibers

We investigated the effect of continuous-wave (cw) UV laser radiation on single-mode Ge-doped H2- loaded optical fibers. An innovative technique was developed to measure the optical absorption (OA) induced in the samples by irradiation, and to study its dependence from laser fluence. The combined use of the electron spin resonance (ESR) technique allowed the structural identification of several radiation-induced point defects, among which the Ge(1) (GeO4 -) is found to be responsible of induced OA in the investigated spectral region.

Resonance Raman of oxygen dangling bonds in amorphous silicon dioxide

We investigate the origin of a resonance Raman band induced by ionizing radiation in amorphous silicon dioxide (silica glass), which can be detected under ultraviolet laser excitation. A silica sample, rich of oxygen-excess related defects, was prepared by treating some length of a pure-silica-core multimode fiber in an O2 atmosphere (at high temperature and pressure) and by irradiating it with X-rays at 10 MGy(SiO2) dose. A micro-Raman study revealed a gaussian band peaking at 896 cm−1 with a full width at half maximum of 32 cm−1, which could be detected by exciting the sample with the 325-nm line of a HeCd laser. This spectral feature is absent in the Raman spectra performed with the 442-…

Influence of specific codopants and post-treatments on Erbium Doped Fibers: Radiation behavior characteristics by CML

Influence du rayonnement X sur des fibres et préformes canoniques dopées au phosphore

Etude spectroscopique de fibres durcies pour un environnement radiatif sévère

Les nouveaux environnements radiatifs, comme LMJ, ITER, ILE/ELI, HiPER, réacteurs nucléaires des générations III+ et IV, nécessitent le développement de nouveaux composants pour le transport et le traitement des signaux. A cause de l’impossibilité d’utiliser les composants électroniques, la recherche est orientée vers les composants à fibres optiques comme vecteur d’information et aussi comme élément de diagnostic. Ils présentent de nombreux avantages, comme leur relative immunité électromagnétique, faible pois, large bande passante, mais les rayonnements gamma et les neutrons dégradent leur transmission. La dégradation dépend principalement de la composition de la fibre. Ainsi, il a été mo…

Coupled experiment/simulation approach for the design of radiation-hardened rare-earth doped optical fibers and amplifiers

We developed an approach to design radiation-hardened rare earth -doped fibers and amplifiers. This methodology combines testing experiments on these devices with particle swarm optimization (PSO) calculations. The composition of Er/Yb-doped phosphosilicate fibers was improved by introducing Cerium inside their cores. Such composition strongly reduces the amplifier radiation sensitivity, limiting its degradation: we observed a gain decreasing from 19 dB to 18 dB after 50 krad whereas previous studies reported higher degradations up to 0°dB at such doses. PSO calculations, taking only into account the radiation effects on the absorption efficiency around the pump and emission wavelengths, co…

Radiation responses of Yb/Er-doped phosphosilicate optical fibers: hardening mechanisms related to Ce-codoping

International audience; In this paper, we investigated the origins of the Ce positive influence on the radiation response of Yb/Er-doped phosphosilicate optical fibers. To this purpose, we carried out during γ-irradiations an online characterization on active optical fiber prototypes, made with different Ce concentrations and integrated in optical amplifiers. The hardening effect of Ce-codoping is highlighted, as well as some aspects related to the radiation response of the phosphosilicate host glass of the active optical fibers.

Irradiation induced defects in fluorine doped silica

International audience

Photoluminescence properties of point defects in Ge-doped fibers and preforms

International audience; The optical properties of Ge-related point defects are often the most important parameter for the performances of silica based optical fibers. On one side their presence is often detrimental for the light transmission, on the other side some defect typologies exhibit modifications under radiation exposure thus offering the peculiar property of photosensitivity that is exploited to build technologically relevant devices such as fiber Bragg gratings.

Photocycle of point defects in highly- and weakly-germanium doped silica revealed by transient absorption measurements with femtosecond tunable pump.

AbstractWe report pump-probe transient absorption measurements addressing the photocycle of the Germanium lone pair center (GLPC) point defect with an unprecedented time resolution. The GLPC is a model point defect with a simple and well-understood electronic structure, highly relevant for several applications. Therefore, a full explanation of its photocycle is fundamental to understand the relaxation mechanisms of such molecular-like systems in solid state. The experiment, carried out exciting the sample resonantly with the ultraviolet (UV) GLPC absorption band peaked at 5.1 eV, gave us the possibility to follow the defect excitation-relaxation dynamics from the femto-picosecond to the nan…

Role of Ce3+ as sensitizer for the infrared luminescence of phosphosilicate Er/Yb doped glasses

The luminescence properties of the Yb/Er-doped phosphosilicate preforms used for the design of active optical fibers were investigated under a tunable laser excitation from ultraviolet to infrared domain. We demonstrated that codoping the glass matrix with Ce3+ ions strongly influences the infrared emission associated with Er3+ ions, it enhances the energy transfer from Yb3+ to Er3+ ions, and it provides an additional ultraviolet excitation channel for the emission of both Yb3+ and Er3+ ions. The excitation/emission pathways are discussed on the basis of models proposed in literature for other systems.

X-ray irradiation effects on a specific multistep Ge-doped fiber

International audience; The study of point defects generation in optical fibers plays an important role with regards to their use and application in different domains. Their design and elaboration processes (dopants type, concentration, refractive index profile, drawing conditions...) govern their responses and more generally their radiation hardness [1]. In this work we investigated, the influence of 10 keV X-ray irradiations on a set of specific germanosilicate optical fibers elaborated from the same preform at different drawing conditions. The germanium doping levels along the fiber core diameter was specifically designed to follow a two-step distribution in order to highlight the Ge-con…

Influence of fluorine on the fiber performance studied through the NBOHC-related 1.9 eV microluminescence

International audience; The distribution of Non Bridging Oxygen Hole Centers (NBOHC) in Fluorine doped optical fibers was investigated by confocal microluminescence spectroscopy monitoring the characteristic 1.9 eV luminescence band. The results show that these defects are generated by the fiber drawing and their concentration further increases after γ irradiation. The NBOHC profile along the fiber is anticorrelated to the fluorine content. This finding agrees with the role of fluorine in the fiber toughness and is discussed from the microscopic point of view on the basis of previous works.

Radiation Response of Ce-Doped Phosphosilicate Optical Fibers

International audience; We report an experimental study of the radiation effects on silica-based multimode optical fibers (OFs) either doped with Phosphorus or with Phosphorus and Cerium. Online Radiation-Induced-Absorption (RIA) measurements were performed in the UV-visible spectral domain under 10 keV X-ray Irradiation. Optical Absorption (OA) in the Near Infrared Region (NIR) and Electron Paramagnetic Resonance (EPR) measurements were also performed on γ-irradiated OFs.

Design of Radiation-Hardened Rare-Earth Doped Amplifiers through a Coupled Experiment/Simulation Approach

International audience; We present an approach coupling a limited experimental number of tests with numerical simulations regarding the design of radiation-hardened (RH) rare earth (RE)-doped fiber amplifiers. Radiation tests are done on RE-doped fiber samples in order to measure and assess the values of the principal input parameters requested by the simulation tool based on particle swarm optimization (PSO) approach. The proposed simulation procedure is validated by comparing the calculation results with the measured degradations of two amplifiers made with standard and RH RE-doped optical fibers, respectively. After validation, the numerical code is used to theoretically investigate the …

Durcissement de matériaux pour l’optique et la photonique destinés à l’utilisation dans un environnement énergétique

Durcissement aux radiations de fibres optiques dopées terres rares et d'amplificateurs 'a fibres optiques

National audience; Cette étude vise à comprendre les effets d'une irradiation Ȗ sur les propriétés optiques et structurales des fibres dopées aux Terres Rares en vue de leur utilisation dans des amplificateurs à fibre réalisés pour des applications spatiales. L'enjeu majeur de durcissement de ces composants est abordé via des techniques telles que le chargement en hydrogène et/ou le co-dopage au Cérium du cœur des fibres optiques. L'identification des centres responsables de l'atténuation induite par irradiation et la compréhension des mécanismes de dégradation mis en jeu sont des étapes indispensables au développement de ces fibres.

Radiation Effects on Silica-Based Preforms and Optical Fibers - II: Coupling Ab Initio Simulations and Experiments

International audience; Both experimental and theoretical approaches are combined to study the nature of precursor sites and radiation-induced point defects in pure and germanium-doped amorphous silica-based glasses.

10-keV X-ray irradiation effects on phosphorus doped fibers and preforms: electron spin resonance and optical studies

Thermal bleaching of gamma-induced-defects in optical fibers

International audience; Ge-doped and F-doped gamma-irradiated fibers with a maximum accumulated dose of 10 MGy were subjected to isochronal annealing treatments up to 750°C. The thermal treatment influence on the point defect generation and transformation were investigated through Radiation Induced Attenuation (RIA) changes in the visible and IR spectral domains. The thermal bleaching of gammainduced-defects depends on both temperature and composition of optical fibers.