0000000000086062
AUTHOR
Julie J.e. Teuwen
Leading Edge Erosion of Wind Turbine Blades: Effects of Environmental Parameters on Impact Velocities and Erosion Damage Rate
Abstract Leading edge erosion (LEE) of a wind turbine blade (WTB) is a complex phenomenon that contributes to high operation and maintenance costs. The impact between rain droplets and rotating blades exerts cyclic fatigue stresses on the leading edge — causing progressive material loss and reduced aerodynamic performance. One of the most important parameters for erosion modelling and damage prediction is the relative impact velocity between rain droplets and rotating blade and depends upon the environmental conditions. The environmental condition, in general, could vary for onshore and offshore wind turbines (OWTs) — for instance, the presence of wave-induced loads along with less turbulen…
A computational framework for coating fatigue analysis of wind turbine blades due to rain erosion
Author's accepted manuscript The rain-induced fatigue damage in the wind turbine blade coating has attracted increasing attention owing to significant repair and maintenance costs. The present paper develops an improved computational framework for analyzing the wind turbine blade coating fatigue induced by rain erosion. The paper first presents an extended stochastic rain field simulation model that considers different raindrop shapes (spherical, flat, and spindle), raindrop sizes, impact angles, and impact speeds. The influence of these raindrop characteristics on the impact stress of the blade coating is investigated by a smoothed particle hydrodynamics approach. To address the expensive …
A probabilistic rainfall model to estimate the leading-edge lifetime of wind turbine blade coating system
Rain-induced leading-edge erosion of wind turbine blades is associated with high repair and maintenance costs. For efficient operation and maintenance, erosion models are required that provide estimates of blade coating lifetime at a real scale. In this study, a statistical rainfall model is established that describes probabilistic distributions of rain parameters that are critical for site-specific leading-edge erosion assessment. A new droplet size distribution (DSD) is determined based on two years’ onshore rainfall data of an inland site in the Netherlands and the obtained DSD is compared with those from the literature. Joint probability distribution functions of rain intensities and dr…
Leading edge erosion of wind turbine blades: Effects of blade surface curvature on rain droplet impingement kinematics
Abstract The issue of leading edge erosion (LEE) of wind turbine blades (WTBs) is a complex problem that reduces the aerodynamic efficiency of blades, and affects the overall cost of energy. Several research efforts are being made at the moment to counter erosion of WTBs such as-testing of advanced coating materials together with development of high-fidelity computational models. However, the majority of these studies assume the coated surfaces as flat, while the surface curvature and the shape of the aerofoil at the blade’s leading-edge exposed to such rain fields is neglected. The present study questions the assumption of a flat surface, in the context of LEE of WTBs, and provides guideli…
Minimum Leading Edge Protection Application Length to Combat Rain-Induced Erosion of Wind Turbine Blades
Leading edge erosion (LEE) repairs of wind turbine blades (WTBs) involve infield application of leading edge protection (LEP) solutions. The industry is currently aiming to use factory based LEP coatings that can applied to the WTBs before they are shipped out for installation. However, one of the main challenges related to these solutions is the choice of a minimum LEP application length to be applied in the spanwise direction of the WTBs. Generally, coating suppliers apply 10–20 m of LEP onto the blades starting from the tip of the blade using the “rule of thumb”, and no studies in the literature exist that stipulate how these LEP lengths can be calculated. In this study, we extend the sc…
A probabilistic long‐term framework for site‐specific erosion analysis of wind turbine blades: A case study of 31 Dutch sites
Abstract Rain‐induced leading‐edge erosion (LEE) of wind turbine blades (WTBs) is associated with high repair and maintenance costs. The effects of LEE can be triggered in less than 1 to 2 years for some wind turbine sites, whereas it may take several years for others. In addition, the growth of erosion may also differ for different blades and turbines operating at the same site. Hence, LEE is a site‐ and turbine‐specific problem. In this paper, we propose a probabilistic long‐term framework for assessing site‐specific lifetime of a WTB coating system. Case studies are presented for 1.5 and 10 MW wind turbines, where geographic bubble charts for the leading‐edge lifetime and number of repai…
Offshore wind turbine operations and maintenance: A state-of-the-art review
Abstract Operations and maintenance of offshore wind turbines (OWTs) play an important role in the development of offshore wind farms. Compared with operations, maintenance is a critical element in the levelized cost of energy, given the practical constraints imposed by offshore operations and the relatively high costs. The effects of maintenance on the life cycle of an offshore wind farm are highly complex and uncertain. The selection of maintenance strategies influences the overall efficiency, profit margin, safety, and sustainability of offshore wind farms. For an offshore wind project, after a maintenance strategy is selected, schedule planning will be considered, which is an optimizati…
Effects of Onshore and Offshore Environmental Parameters on the Leading Edge Erosion of Wind Turbine Blades: A Comparative Study
Abstract The presence of rain-induced leading edge erosion of wind turbine blades (WTBs) necessitates the development of erosion models. One of the essential parameters for erosion modeling is the relative impact velocity between rain droplets and the rotating blade. Based on this parameter, the erosion damage rate of a WTB is calculated to estimate the expected leading edge lifetime. The environmental conditions that govern this parameter have site-specific variations, and thus, rain and wind loading on a turbine differ for onshore and offshore locations. In addition, there are wave loads present in the offshore environment. The present paper tries to provide guidelines for erosion modelin…
Numerical investigation of rain droplet impact on offshore wind turbine blades under different rainfall conditions: A parametric study
The leading edge of a fiber composite wind turbine blade (WTB) is prone to erosion damages due to repeated rain droplet impact during its service life. Such damages are critical to the blade's aerodynamic as well as structural performance, ultimately resulting in substantial repair costs. An effective design of a coating material for WTB is necessary and its analysis must include variables associated with erosive rain droplets such as (1) droplet diameter, (2) impact velocity, and (3) droplet impact angle. The present paper develops and validates a coupled fluid structure interaction (FSI) computational model for simulating rain droplet impact on WTBs, where the structure domain is modelled…