showing 28 related works from this author
Heat-Resistant Fully Bio-Based Nanocomposite Blends Based on Poly(lactic acid)
2013
Poly(lactic acid) (PLA) is melt mixed with polyamide 11 (PA11) to obtain a heat-resistant fully bio-based blend with PLA as the dominant component. The goal is achieved by adding small amounts of organoclay (OMMT), which is used to manipulate the blend microstructure. The selective positioning of the OMMT inside the PA11 and at the PLA/PA11 interface turns the blend morphology from drop/matrix into co-continuous at high PLA content (70 wt%). The OMMT-rich PA11 framework that interpenetrates the major PLA phase effectively contributes to bear stresses, and the nanocomposite blend keeps its structural integrity up to ≈160 °C, i.e., about 100 °C above the PLA glass transition.
A new approach to increase the integration of RES in a mediterranean island by using HTLS conductors
2015
Today, in many countries, it is very difficult to build new power lines, especially because of right of way authorization problems. Furthermore, the production of electricity from renewable sources is growing more and more. For these reasons Terna S.p.A. (Italian TSO) has to take advantage of existing overhead transmission lines. In order to increase the transmission capacity and the exportation of RES (Renewable Energy Sources) from Sicily to the mainland, the existing high-voltage power grid in Sicily has been studied and analysed by Neplan®, which is a powerful software tool able to analyze, plan, optimize and simulate electrical power grids. This paper, after a description of existing p…
Selective localization of organoclay and effects on the morphology and mechanical properties of LDPE/PA11 blends with distributed and co-continuous m…
2010
A study was made on the effect of small amounts of organically modified clay on the morphology and mechanical properties of blends of low-density polyethylene and polyamide 11 at different compositions. The influence of the filler on the blend morphology was investigated using wide angle X-ray diffractometry, scanning and transmission electron microscopy and selective extraction experiments. The filler was found to locate predominantly in the more hydrophilic polyamide phase. Although such uneven distribution does not have a significant effect on the onset of phase co-continuity of the polymer components, it brings about a drastic refinement of the microstructure for the blends both with dr…
α-Tocopherol-induced radical scavenging activity in carbon nanotubes for thermo-oxidation resistant ultra-high molecular weight polyethylene-based na…
2014
?-Tocopherol, a natural antioxidant molecule, was physically immobilized on the outer surface of multi-walled carbon nanotubes (CNTs), and the resulting functionalised particles (f-CNTs) were dispersed in ultra-high molecular weight polyethylene aiming at improving its thermo-oxidation resistance. The success of the functionalization was assessed through spectroscopic and thermal analysis, and the influence of the filler on the thermo-oxidative stability of the nanocomposites was investigated through rheological analyses and infrared spectroscopy. We found that the addition of only 1 wt.% of f-CNTs brings about a surprisingly high oxidation resistance, with a five/ten-fold increase of the i…
Methodologies for the Exploitation of Existing Energy Corridors. GIS Analysis and DTR Applications
2018
The exploitation of power lines currently in operation has now become a common practice among electric system operators. The construction of new power lines requires taking economic, political and social problems into consideration. This paper considers two methodologies adopted by the Italian Transmission System Operator (TSO), Terna S.p.A.: Dynamic Thermal Rating (DTR) and Laser Imaging Detection and Ranging-Geographic Information System (L-GIS). DTR systems dynamically calculate the real transport capacity of a power line. The L-GIS system allows, after the geo-referencing of the power line, the management of any interference between the line and the nearby obstacles, permitting the opti…
Multi-functional polyhedral oligomeric silsesquioxane-functionalized carbon nanotubes for photo-oxidative stable Ultra-High Molecular Weight Polyethy…
2016
Abstract Nanohybrid (phPOSS- f -CNTs) based on Carbon Nanotubes (CNTs) and Phenyl Polyhedral Olygomenric Silsesquioxane (phPOSS) have been synthesized to be used as multifunctional filler for polymer nanocomposites. The success of the functionalization procedure has been demonstrated via accurate spectroscopic, spectrometric and thermo-gravimetric analyses. The results reveal that a large portion of phPOSS is covalently linked to CNTs, while a small amount of phPOSS remains physically adsorbed due to the strong interactions coming from π electron coupling between the CNTs and phenyl rings in phPOSS. Small amounts (1 wt.%) of phPOSS- f -CNTs have been dispersed in Ultra High Molecular Weight…
On the roadmap to supergrid in Sicily: LiDAR technology and HTLS conductors for uprating the 150 kV lines
2014
Difficulties in building new power lines in Italy because of authorization problems, and the production of electricity from renewable sources growing more and more, induces Terna S.p.A. (Italian TSO) to take advantage of existing overhead transmission lines. In order to increase the transmission capacity, Terna has used a software in GIS (Geographic Information System) environment which allows for the management of the interferences according to all the legislative bonds by referring to the LIDAR (Laser Imaging Detection and Ranging) remote sensing technology. This paper, after a description of the GIS and the LiDAR technology, shows how the calculation of the current capacity of some High …
Multi-functional hindered amine light stabilizers-functionalized carbon nanotubes for advanced ultra-high molecular weight Polyethylene-based nanocom…
2015
Hindered Amine Light Stabilizer (HAS) molecules have been covalently linked on the outer surface of multi-walled carbon nanotubes (CNTs), and the so-obtained multi-functional fillers (HAS-f-CNTs) have been compounded with Ultra High Molecular Weight Polyethylene (UHMWPE) to get composite films. The success of the grafting reaction of the HAS molecules has been confirmed through spectroscopic and thermo-gravimetric analyses. Morphological analyses reveal a segregated microstructure, in which CNT-rich channels surround the polymer domains. This morphology results in improved mechanical properties and appreciable electrical conductive features. More importantly, the addition of only 1 wt.% of …
Structure and dynamics of polyethylene/clay films
2006
The relationships between structure and rheology of polyethylene/clay hybrid composite blown films were investigated through rheological tests both in shear and elongational flow. Two polymer matrices (low density polyethylene, LDPE and linear low density polyethylene, LLDPE) with different relaxation kinetics were used. Independently from the matrix, morphological analyses (TEM, XRD, and SEM) indicate that the hybrid structures are similarly constituted of delaminated platelets or tactoids having a relevant degree of orientation along the draw direction. This strongly affects the rheological behavior of materials. However, despite the similarities emerged from morphological analyses, both …
Effectiveness of organoclays as compatibilizers for multiphase polymer blends - A sustainable route for the mechanical recycling of co-mingled plasti…
2014
We prepare and characterize multiphase systems in which small amounts of recycled polymer, namely polyethylene terephtalate (PET) ground from waste bottles, are dispersed in a co-continuous blend of high-density polyethylene (HDPE) and polypropylene (PP). Some of such ternary systems are also filled with plate-like clay nanoparticles with different polarities, in order to assess their influence on the morphology and mechanical behaviour of the blends. On the basis of preliminary wettability considerations and inspections by means of scanning electron microscopy (SEM), the PET is found to preferentially locate within the PP phase. Such a positioning is desirable in order to minimize the pres…
Time-resolved rheology as a tool to monitor the progress of polymer degradation in the melt state - Part I: Thermal and thermo-oxidative degradation …
2015
Abstract Thermal and thermo-oxidative degradation of polyamide 11 (PA11) in the melt state (T = 215 °C) are studied by resorting to time-resolved mechanical spectroscopy. Such an approach allows to elude the changes in the rheological properties occurring while testing, thus enabling the rigorous study of polymer degradation in the melt state. Different concurrent degradation reactions in oxidative (air) and non-oxidative (N2) environment are promptly guessed by studying the time evolutions of rheological functions. In particular, changes in the zero-frequency complex viscosity reflects changes in the average molecular weight, while the appearance of a yield stress in the complex viscosity …
Cover Picture: Macromol. Mater. Eng. 1/2014
2014
Immobilization of natural anti-oxidants on carbon nanotubes and aging behavior of ultra-high molecular weight polyethylene-based nanocomposites
2014
The use of natural antioxidants is an attractive way to formulate nanocomposites with extended durability and with potential applications in bio-medical field. In this work, Vitamin E (VE) in the form of α-tocopherol and Quercetin (Q) are physically immobilized on the outer surface of multi-walled carbon nanotubes (CNTs). Afterward, the CNTs-VE and CNTs-Q are used to formulate thermally stable ultra high molecular weight polyethylene based nanocomposites. The obtained results in the study of the thermo-oxidation behavior suggest a beneficial effect of the natural anti-oxidant carbon nanotubes systems. The unexpected excellent thermo-resistance of the nanocomposites seems to be due to a syne…
Using organoclay to promote morphology refinement and co-continuity in high-density polyethylene/polyamide 6 blends – Effect of filler content and po…
2010
We investigate the gradual changes of the microstructure of two blends of high-density polyethylene (HOPE) and polyamide 6 (PA6) at opposite composition filled with increasing amounts of an organo-modified clay. The filler locates preferentially inside the polyamide phase, bringing about radical alterations in the micron-scale arrangement of the polymer phases. When the host polyamide represents the major constituent, a sudden reduction of the average sizes of the polyethylene droplets was observed upon addition of even low amounts of organoclay. A morphology refinement was also noticed at low filler contents when the particles distributes inside the minor phase. In this case, however, keep…
Mitigation of 50 Hz magnetic field produced by an overhead transmission line
2015
Power transmission utilities are challenged by the need to expand transmission system capacity to meet growing energy demands. The impact of high voltage overhead transmission lines on the environment represents a hot topic in the context of transport and distribution of electrical energy. In particular, interest towards the effects of extra low frequency (ELF) magnetic fields generated by high-voltage power transmission lines has been increasing significantly during the last decade, giving rise to a number of policy initiatives and research activities. Therefore, the evaluation of the magnetic field generated by conductors of overhead lines is of primary importance in order to develop meth…
Photo-oxidation behaviour of polyethylene/polyamide 6 blends filled with organomodified clay: Improvement of the photo-resistance through morphology …
2010
Abstract The impact of small amounts of organomodified clay (OMMT) on the photo-degradation behaviour of two blends obtained by mixing either low-density polyethylene (LDPE) or high density polyethylene (HDPE) with polyamide 6 (PA6) (LDPE/PA6 and HDPE/PA6 75/25 wt-%) was studied. The complex photo-degradation behaviour was followed by monitoring the main physical–mechanical properties of the blends. In particular, mechanical and spectroscopic tests were performed in conditions of accelerated artificial aging. An accurate mechanical and morphological characterization was previously carried out. The presence of the OMMT promotes the unexpected formation of a co-continuous morphology for the H…
The role of organoclay in promoting co-continuous morphology in high-density poly(ethylene)/poly(amide) 6 blends
2008
The effect of organically modified clay on the morphology, rheology and mechanical properties of high-density polyethylene (HDPE) and polyamide 6 (PA6) blends (HDPE/PA6 ¼ 75/25 parts) is studied. Virgin and filled blends were prepared by melt compounding the constituents using a twin-screw extruder. The influence of the organoclay on the morphology of the hybrid was deeply investigated by means of wide-angle X-ray diffractometry, transmission and scanning electron microscopies and quantitative extraction experiments. It has been found that the organoclay exclusively places inside the more hydrophilic polyamide phase during the melt compounding. The extrusion process promotes the formation o…
GIS systems and LIDAR technology for the operation of HV lines. Sicilian transmission network applications
2013
The difficulties to build new power lines within the national territory cause of authorization problems, and the evermore growing production of electricity from renewable sources, induces Terna S.p.A. (Italian TSO) to take advantage of existing overhead transmission lines. Therefore, in order to increase the transmission capacity, and to optimize the maintenance and management of power lines, for some years Terna has been using a software in GIS environment (Geographic Information System) that referring to the LIDAR (Laser Imaging Detection and Ranging) remote sensing technology, allows to manage the interferences according to all the requirements and legislative bonds and to fulfill the im…
Using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for the characterization of functionalized carbon nanotubes
2013
RATIONALE Functionalization of carbon nanotubes (CNTs) generates complex systems that require the development of suitable characterization protocols. New techniques have been explored, and existing analytical and spectroscopic methods to characterize functionalized CNTs have been adapted. Presently, chemical characterization of functionalized CNTs (f-CNTs) remains a difficult task. METHODS Matrix-assisted laser desorption/ionization (MALDI) analysis is performed on f-MWCNT samples prepared via grafting or absorption of anti-oxidant (AO) molecules on both MWCNT-COOH and MWCNT-OH. Covalently functionalized MWCNTs were subjected to thermal degradation and/or hydrolysis reaction before analysis…
Impact of nanoparticles on the environmental sustainability of polymer nanocomposites based on bioplastics or recycled plastics – A review of life-cy…
2022
Adding nanoparticles to a host polymer can lead to performance improvements that can be twice as beneficial to the environment: first, sustainable nanocomposites based on bioplastics or recycled plastics could replace ubiquitous petroleum-based polymers; second, substantial plastic saving could be achieved by profiting from the superior specific properties of the nanocomposites. Nevertheless, the inherent environmental burden of nanoparticles can compromise the expected benefits. Here we address the controversial issue of the environmental sustainability of “green” polymer nanocomposites based on bioplastics and recycled plastics. A critical review of life-cycle assessment studies regarding…
Time-resolved rheology as a tool to monitor the progress of polymer degradation in the melt state – Part II: Thermal and thermo-oxidative degradation…
2015
Abstract Thermal and thermo-oxidative degradation of nanocomposites based on polyamide 11 (PA11) and organo-modified clay (Cloisite® 30B) are studied in the melt state (T = 215 °C) via time-resolved mechanical spectroscopy (TRMS). The goal is assessing the potentiality of rheological analysis for studying polymer degradation in complex systems such as polymer nanocomposites, whose rheological response stems from the combination of the contributions of polymer and nanoparticles. We prove that a thorough analysis grounded on TRMS allows to isolate the effect of degradation of the polymer matrix, whose progress can be hence profitably monitored. Essentially the same degradation mechanisms as i…
Low-density polyethylene/polyamide/clay blend nanocomposites: Effect of morphology of clay on their photooxidation resistance
2017
The photooxidation behaviour of low-density polyethylene (LDPE)/polyamide (PA) blends, containing polyamide 11 (PA11) or polyamide 6 (PA6), has been investigated in the absence and presence of a small amount of commercial organomodified clay (OMMT). The polymer blends LDPE/PA11 and LDPE/PA6 at 75/25 wt./wt.%, with and without OMMT, have been prepared by a two-step procedure: extrusion and sheet formulation. The formulated complex systems have been subjected to accurate morphological analysis in order to evaluate the effect of the OMMT presence on the refinement of the blend morphology. Furthermore, the produced sheets have been subjected to arterial UVB exposure and the variations of the me…
Role of organo-modifier and metal impurities of commercial nanoclays in the photo-and thermo-oxidation of polyamide 11 nanocomposites
2020
The photo-oxidative degradation processes of bio-based PA11 nanocomposites containing montmorillonite (MMT) and the organo-modified Cloisite®
Grafting of polymer chains on the surface of carbon nanotubes via nitroxide radical coupling reaction
2015
Poly(butylene succinate) (PBS) was grafted on the surface of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) modified multi-walled carbon nanotubes (MWCNTs) via a nitroxide radical coupling reaction. TEMPO functionalized MWCNTs (MWCNTs-g-TEMPO) were synthesized using the Cu(I)-catalyzed azide/alkyne click chemistry approach and the covalent bond of the nitroxide moieties onto the MWCNTs was confirmed via electron paramagnetic resonance (EPR) spectroscopy. The PBS grafting on the sidewalls of MWCNTs was carried out in solution via peroxide-induced formation of macroradicals and it was confirmed by EPR and attenuated total reflectance Fourier transform infrared analysis. Preliminary rheological …
Functionalization of aliphatic polyesters by nitroxide radical coupling
2014
Functionalized poly(butylene succinate) (PBS) samples were prepared by a post-polymerization method based on the coupling reaction between TEMPO derivatives bearing different functionalities and PBS macroradicals generated by H-abstraction using a peroxide. 4-Benzoyloxy-2,2,6,6-tetramethylpiperidine-1- oxyl (BzO-TEMPO) and 4-(1-naphthoate)-2,2,6,6-tetramethylpiperidine-1-oxyl (NfO-TEMPO), a pro-fluorescent nitroxide, were successfully grafted on PBS, as revealed by MALDI TOF MS and UV-Vis spectroscopy. The functionalization degrees were accurately determined by UV-Vis analysis and confirmed by 1H-NMR spectroscopy. The grafting site was identified by combining theoretical calculations with e…
Advanced ultra-high molecular weight polyethylene/antioxidant-functionalized carbon nanotubes nanocomposites with improved thermo-oxidative resistance
2015
Multiwalled carbon nanotubes (CNTs) functionalized with hindered phenol moieties are dispersed in ultra-high molecular weight polyethylene (UHMWPE), and the stabilizing action of the antioxidant (AO) functionalized CNTs (AO-f-CNTs) is studied through a combination of rheological and spectroscopic (FT-IR) analyses. The effectiveness of two alternative compounding methods, namely hot compaction (HC) and melt mixing (MM), is compared. The combination of high temperature and mechanical stress experienced during MM brings about noticeable degradation phenomena of the matrix already in the course of the compounding step. Differently, the milder conditions of the HC process preserve the stability …
Thermo-oxidative resistant nanocomposites containing novel hybrid-nanoparticles based on natural polyphenol and carbon nanotubes
2015
Abstract Quercetin (Q), a natural antioxidant molecule, is physically immobilized onto multi-walled carbon nanotubes (CNTs) bearing covalently-linked long-chain alkyl functional groups, and the so obtained hybrid-nanoparticles are used to prepare Ultra High Molecular Weight PolyEthylene-based nanocomposite films with enhanced thermo-oxidation resistance. The effective immobilization of the Q molecules is confirmed by spectroscopic (micro-Raman, ATR-FTIR, and FTIR) and thermo-gravimetric analyses, and the influence of the nanoparticles on the rheological behaviour and thermo-oxidative stability of the nanocomposites are investigated. Rheological analyses (linear viscoelasticity and stress re…
Using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for the characterization of functionalized carbon nanotubes
2013
RATIONALE: Functionalization of carbon nanotubes (CNTs) generates complex systems that require the development of suitable characterization protocols. New techniques have been explored, and existing analytical and spectroscopic methods to characterize functionalized CNTs have been adapted. Presently, chemical characterization of functionalized CNTs (f-CNTs) remains a difficult task. METHODS: Matrix-assisted laser desorption/ionization (MALDI) analysis is performed on f-MWCNT samples prepared via grafting or absorption of anti-oxidant (AO) molecules on both MWCNT-COOH and MWCNT-OH. Covalently functionalized MWCNTs were subjected to thermal degradation and/or hydrolysis reaction before analys…