New measurement of the 242Pu(n,γ) cross section at n-TOF-EAR1 for MOX fuels: Preliminary results in the RRR

The spent fuel of current nuclear reactors contains fissile plutonium isotopes that can be combined with 238U to make mixed oxide (MOX) fuel. In this way the Pu from spent fuel is used in a new reactor cycle, contributing to the long-term sustainability of nuclear energy. The use of MOX fuels in thermal and fast reactors requires accurate capture and fission cross sections. For the particular case of 242Pu, the previous neutron capture cross section measurements were made in the 70’s, providing an uncertainty of about 35% in the keV region. In this context, the Nuclear Energy Agency recommends in its “High Priority Request List” and its report WPEC-26 that the capture cross section of 242Pu…

7Be(n,α) and 7Be(n,p) cross-section measurement for the cosmological lithium problem at the n-TOF facility at CERN

One of the most puzzling problems in Nuclear Astrophysics is the “Cosmological Lithium Problem”, i.e the discrepancy between the primordial abundance of \(^{7}\)Li observed in metal poor halo stars (Asplund et al. in Astrophys J 644:229–259, 2006, [1]), and the one predicted by Big Bang Nucleosynthesis (BBN). One of the reactions that could have an impact on the problem is \(^{7}\)Be(n,p)\(^{7}\)Li. Despite of the importance of this reaction in BBN, the cross-section has never been directly measured at the energies of interest for BBN. Taking advantage of the innovative features of the second experimental area at the n\(\_\)TOF facility at CERN (Sabate-Gilarte et al. in Eur Phys J A 53:210,…

The n_TOF facility: Neutron beams for challenging future measurements at CERN

The CERN n TOF neutron beam facility is characterized by a very high instantaneous neutron flux, excellent TOF resolution at the 185 m long flight path (EAR-1), low intrinsic background and coverage of a wide range of neutron energies, from thermal to a few GeV. These characteristics provide a unique possibility to perform high-accuracy measurements of neutron-induced reaction cross-sections and angular distributions of interest for fundamental and applied Nuclear Physics. Since 2001, the n TOF Collaboration has collected a wealth of high quality nuclear data relevant for nuclear astrophysics, nuclear reactor technology, nuclear medicine, etc. The overall efficiency of the experimental prog…

New reaction rates for the destruction of $^7$Be during big bang nucleosynthesis measured at CERN/n_TOF and their implications on the cosmological lithium problem

New measurements of the7Be(n,α)4He and7Be(n,p)7Li reaction cross sections from thermal to keV neutron energies have been recently performed at CERN/n_TOF. Based on the new experimental results, astrophysical reaction rates have been derived for both reactions, including a proper evaluation of their uncertainties in the thermal energy range of interest for big bang nucleosynthesis studies. The new estimate of the7Be destruction rate, based on these new results, yields a decrease of the predicted cosmological7Li abundance insufficient to provide a viable solution to the cosmological lithium problem.

Acyclovir Delivery Matrices Based on Poly(Ethylene Glycol)/Chitosan Semi-Interpenetrating Networks

Abstract Chitosan matrix systems have been studied as potential vehicles for the prolonged release of acyclovir (ACV). The influence of chitosan concentration (from 0.83% to 1.67%) on viscoelastic properties of formulations with and without glyoxal was analyzed. For chitosan‐poly(ethylene glycol) 400 formulations loss modulus ( G ″) are greater than storage modulus ( G ′). This corresponds to the characteristic behavior of nonstructured systems. When glyoxal was added to the chitosan‐poly(ethylene glycol) 400 formulations, gelled matrix was obtained (i.e., G ′ is higher than G ″), except for the lowest chitosan concentration. ACV release rates for the both types of systems, with and without…

Be7(n,α)He4Reaction and the Cosmological Lithium Problem: Measurement of the Cross Section in a Wide Energy Range at n_TOF at CERN

The energy-dependent cross section of the (7)Bed(n,alpha)He-4 reaction, of interest for the so-called cosmological lithium problem in big bang nucleosynthesis, has been measured for the first time from 10 meV to 10 keV neutron energy. The challenges posed by the short half-life of Be-7 and by the low reaction cross section have been overcome at n_TOF thanks to an unprecedented combination of the extremely high luminosity and good resolution of the neutron beam in the new experimental area (EAR2) of the n_TOF facility at CERN, the availability of a sufficient amount of chemically pure Be-7, and a specifically designed experimental setup. Coincidences between the two alpha particles have been…

A laboratory experiment on inferring Poiseuille's law for undergraduate students

In this paper a laboratory experiment is proposed to infer Poiseuille's law. A simple set-up based on two flasks joined by a detachable tube allows one to measure using tubes of different radii and different lengths. One of the flasks is connected to a vacuum pump to control the pressure differential between the tube extremes. The influence on the flow of different radii, lengths, pressures and viscosities can be studied in a didactic way by measuring the flow rate for each of these variables. The experiment can be performed getting together the students in groups, so that each group concentrates on the effect on the flow of a specific variable, leaving the rest fixed. After putting togethe…

The Nuclear astrophysics program at n_TOF (CERN)

An important experimental program on Nuclear Astrophysics is being carried out at the n_TOF since several years, in order to address the still open issues in stellar and primordial nucleosynthesis. Several neutron capture reactions relevant to s-process nucleosynthesis have been measured so far, some of which on important branching point radioisotopes. Furthermore, the construction of a second experimental area has recently opened the way to challenging measurements of (n, charged particle) reactions on isotopes of short half-life. The Nuclear Astrophysics program of the n_TOF Collaboration is here described, with emphasis on recent results relevant for stellar nucleosynthesis, stellar neut…

Chitosomes as drug delivery systems for C-phycocyanin: preparation and characterization.

The aim of this work was to investigate chitosomes, i.e. liposomes coated by a polyelectrolyte complex between chitosan (CH) and xantan gum (XG), as potential delivery system for oral administration of the protein C-phycocyanin. To this purpose several CH-XG-microcomplexes were prepared in aqueous lactic acid at different chitosan-xanthan gum percent ratios and rheological properties of the microcomplexes were studied to analyse the contribution of chitosan and xanthan gum in the reaction of microcomplexation. After establishing the best microcomplexes, chitosomes were prepared by coating C-phycocyanin loaded liposomes with the CH-XG hydrogels using spray-drying or freeze-drying. The chitos…

Comparison of global ultraviolet (290–385 nm) and global irradiation measured during the warm season in valencia, spain

This paper studies data of ultraviolet (290–385 nm band) horizontal solar irradiation and global horizontal solar irradiation measured at Valencia (Spain) during the period March 1991 to September 1991. Analysis of error estimations and correlation coefficients show that the 10 minute, hourly, and daily values of ultraviolet (UV) and global irradiation are highly correlated. Improved figures and less dependence on location are achieved by defining a clearness index for the UV 290–385 nm band and relating it to the conventional whole-band clearness index. The novel clearness index obtained from Valencia data is approximately half of the conventional clearness index. Considering solar elevati…

The 33S(n,α)30Si cross section measurement at n TOF-EAR2 (CERN): From 0.01 eV to the resonance region

The 33S(n,α)30Si cross section measurement, using 10B(n,α) as reference, at the n TOF Experimental Area 2 (EAR2) facility at CERN is presented. Data from 0.01 eV to 100 keV are provided and, for the first time, the cross section is measured in the range from 0.01 eV to 10 keV. These data may be used for a future evaluation of the cross section because present evaluations exhibit large discrepancies. The 33S(n,α)30Si reaction is of interest in medical physics because of its possible use as a cooperative target to boron in Neutron Capture Therapy (NCT).

First tests of the applicability of gamma-ray imaging for background discrimination in time-of-flight neutron capture measurements

In this work we explore for the first time the applicability of using $\gamma$-ray imaging in neutron capture measurements to identify and suppress spatially localized background. For this aim, a pinhole gamma camera is assembled, tested and characterized in terms of energy and spatial performance. It consists of a monolithic CeBr$_3$ scintillating crystal coupled to a position-sensitive photomultiplier and readout through an integrated circuit AMIC2GR. The pinhole collimator is a massive carven block of lead. A series of dedicated measurements with calibrated sources and with a neutron beam incident on a $^{197}$Au sample have been carried out at n_TOF, achieving an enhancement of a factor…

Fuzzy logic and meteorological variables: a case study of solar irradiance

Solar irradiance is an extreme case of an uncertain variable when measured on an hourly, or shorter time interval. In this paper solar irradiance has been considered as a case study for physical fuzzy modelling of a climate variable. The uncertainty of the solar irradiance is treated as a fuzzy uncertainty whilst other variables are considered crisp. The approach is robust as it does not rely on statistical assumptions, and it is a possible alternative to modelling complex systems. To our knowledge, this is the first time that a physical model of a meteorological variable based on fuzzy numbers has been proposed. Previous rule-based fuzzy meteorological models are only descriptive, and cann…

Measurement of the Pu-242(n,gamma) cross section from thermal to 500 keV at the Budapest research reactor and CERN n_TOF-EAR1 facilities

The design and operation of innovative nuclear systems requires a better knowledge of the capture and fission cross sections of the Pu isotopes. For the case of capture on 242Pu, a reduction of the uncertainty in the fast region down to 8-12% is required. Moreover, aiming at improving the evaluation of the fast energy range in terms of average parameters, the OECD NEA High Priority Request List (HPRL) requests high-resolution capture measurements with improved accuracy below 2 keV. The current uncertainties also affect the thermal point, where previous experiments deviate from each other by 20%. A fruitful collaboration betwen JGU Mainz and HZ Dresden-Rossendorf within the EC CHANDA project…

Flow and thixotropy of non-contaminating oil drilling fluids formulated with bentonite and sodium carboxymethyl cellulose

Abstract A study has been made of low-contaminating oil drilling mud in water base, composed of bentonite, at concentrations in the range of 6–12% (w/w), and sodium carboxymethyl cellulose at two different concentrations. Flow analysis yielded an empirical formula indicating shear stress as a function of the formulation concentrations of bentonite and sodium carboxymethyl cellulose, stirring time and shear rate. To study the thixotropy of the different formulations the cycles' method has been used. Calculations were made of the thixotropic areas, obtaining a semi-empirical equation for these areas. The results are analyzed on the base of relative thixotropic area and total relative thixotro…

Radiative neutron capture on Pu242 in the resonance region at the CERN n_TOF-EAR1 facility

The spent fuel of current nuclear reactors contains fissile plutonium isotopes that can be combined with uranium to make mixed oxide (MOX) fuel. In this way the Pu from spent fuel is used in a new reactor cycle, contributing to the long-term sustainability of nuclear energy. However, an extensive use of MOX fuels, in particular in fast reactors, requires more accurate capture and fission cross sections for some Pu isotopes. In the case of Pu242 there are sizable discrepancies among the existing capture cross-section measurements included in the evaluations (all from the 1970s) resulting in an uncertainty as high as 35% in the fast energy region. Moreover, postirradiation experiments evaluat…

The measurement programme at the neutron time-of-flight facility n_TOF at CERN

Neutron-induced reaction cross sections are important for a wide variety of research fields ranging from the study of nuclear level densities, nucleosynthesis to applications of nuclear technology like design, and criticality and safety assessment of existing and future nuclear reactors, radiation dosimetry, medical applications, nuclear waste transmutation, accelerator-driven systems and fuel cycle investigations. Simulations and calculations of nuclear technology applications largely rely on evaluated nuclear data libraries. The evaluations in these libraries are based both on experimental data and theoretical models. CERN’s neutron time-of-flight facility n TOF has produced a considerabl…

Cluster classification of dysphagia-oriented products considering flow, thixotropy and oscillatory testing

Abstract The present paper proposes an objective classification of commercial thickened food widely used in patients with dysphagia. A total of 34 commercial enteral nutrition products were analyzed (beverages, main courses and desserts) corresponding to 6 different commercial brands. All these products contain different hydrocolloids (i.e., starch, xanthan gum, carrageenans, etc.) as thickeners, in order to get the desired texture. Joint consideration has been made of viscous behavior (flow and thixotropy) and viscoelastic behavior (oscillatory testing). Rheological measurements were fitted to different rheological and empirical mathematical models, and a total of 11 parameters were genera…

Fuzzy modeling of solar irradiance on inclined surfaces

A model of solar irradiance on arbitrarily oriented inclined surfaces is proposed, based on fuzzy logic procedures. The behavior of the proposed model is similar to that of other models of increased performance such as the models of Perez or Gueymard, though it requires only a very limited number of classes and adjustable parameters. The use of fuzzy clustering optimizes the number and definition of the sky categories. The model considers overlapping clusters and allows an improved description of the sky situations close to the transition zone between contiguous categories.

Characterization and First Test of an i-TED Prototype at CERN n_TOF

International audience; Neutron capture cross section measurements are of fundamental importance for the study of the slow process of neutron capture, so called s-process. This mechanism is responsible for the formation of most elements heavier than iron in the Universe. To this aim, installations and detectors have been developed, as total energy radiation C$_{6}$ D$_{6}$ detectors. However, these detectors can not distinguish between true capture gamma rays from the sample under study and neutron induced gamma rays produced in the surroundings of the setup. To improve this situation, we propose (Domingo Pardo in Nucl Instr Meth Phys Res A 825:78–86, 2016, [1]) the use of the Compton princ…

DETERMINATION OF PEREZ SOLAR DIFFUSE IRRADIANCE MODEL COEFFICIENTS FOR VALENCIA (SPAIN)

Nuclear data activities at the n_TOF facility at CERN

International audience; Nuclear data in general, and neutron-induced reaction cross sections in particular, are important for a wide variety of research fields. They play a key role in the safety and criticality assessment of nuclear technology, not only for existing power reactors but also for radiation dosimetry, medical applications, the transmutation of nuclear waste, accelerator-driven systems, fuel cycle investigations and future reactor systems as in Generation IV. Applications of nuclear data are also related to research fields as the study of nuclear level densities and stellar nucleosynthesis. Simulations and calculations of nuclear technology applications largely rely on evaluate…

Rheological characterization of chitosan matrices: Influence of biopolymer concentration

Viscoelastic properties of chitosan (CH), chitosan-poly(ethylene glycol) 400 (CH-PEG), and chitosan-poly(ethylene glycol) 400 with glyoxal as crosslinking agent (CH-PEG-Gly) systems were studied to analyze the effect of chitosan concentration (from 0.83 to 1.67%). Dynamic moduli increase as chitosan concentration increases for all systems. For CH and CH-PEG systems the loss modulus (G″) is greater than the storage modulus (G′) with predominance of the viscous over the elastic behavior. This corresponds to the characteristic behavior of solutions (nonstructured systems). The presence of PEG 400 induces a complementary reinforcement of the mechanical properties of the system. Except for the l…

Analysis of stability of food emulsions by Eyring's Theory: Influence of different biopolymers

Eyring's kinetic theory of liquids was applied to the study of flow behavior of low oil content mayonnaises at different temperatures. These food emulsions were formulated with different biopolymers as stabilizers (polysaccharides such as modified starch, gellan gum, and pectin). The analysis of the values obtained for the parameters of the Eyring equation for viscosity determined the emulsion containing only starch as a stabilizer is the most unstable to stirring. Replacement of part of the starch with gellan gum or pectin enhances the stability of the emulsion. The results for activation energy are quite similar for high shear rates, which can be explained by the evolution of the average …