Urban Energy Hubs Economic Optimization and Environmental Comparison in Italy and Vietnam

2018

This paper aims to perform the minimization of the yearly energy supply cost from the main electricity and natural gas grids related to an energy district, considering the installation of different equipments. The case study refers to energy consumption of a medium density urban district and involves the exploitation of different energy sources and devices (photovoltaic systems, electrical energy storage, heat pumps and cogenerators). The analysis of the district energy supply is accomplished through an energy hub model. After a cost analysis related to the considered energy systems, a MILP algorithm was used for the optimization of a cost function and the simulation of various scenarios. M…

Wave and Wind Energy Systems Integration in Vietnam: Analysis of Energy Potential and Economic Feasibility

2020

Vietnam energy demand is currently growing at a very high annual rate, with the government being very interested in investments in renewable energies. Since the region with the highest solar and wind potential is far away from the big load centers, an investigation of offshore energy resources is here proposed. In this study, a review of previous energy potential assessments is provided. Moreover, the minimum feed-in-tariff to make the investments profitable is evaluated, showing that the current tariff for offshore wind plants is largely unattractive.

A review on optimization and cost-optimal methodologies in low-energy buildings design and environmental considerations

2019

Abstract The topic of low-energy buildings received a widespread and growing interest in last years, thanks to energy saving policies of developed countries. The design of a low-energy building is addressed with energy saving measures and renewable energy generation, but the correct assessment of phenomena occurring in a building usually requires to perform dynamic simulations and to analyze multiple scenarios to attain the optimal solution. The optimality of a technical solution may be subject to contrasting constraints and objectives. For this reason, designers may employ mathematical optimization techniques, a non-familiar topic to most of building designers. In this paper, a review on o…

Investigating energy saving potential in a big shopping center through ventilation control

2019

Abstract This paper investigates energy saving measures for the ventilation system of large shopping centers. This kind of buildings is characterized by high yearly energy consumptions, because of the high level of operating hours and the frequent use of obsolete technologies. In the analyzed case studies, three big Do It Yourself (DIY) shops, located in Italy, are considered. Two different approaches are considered, they are aimed at reducing the annual energy consumption for the indoor air exchange of the sales area. The first considered retrofit solution consists in the installation of heat recovery exchangers, reducing the energy demand for the air thermal treatment without changing the…

Multi-Objective Building Envelope Optimization through a Life Cycle Assessment Approach

2019

This work describes a methodology for the identification of the optimal features for the envelope of a residential building. The optimization process allows minimizing operating energy consumption, investment costs and life cycle energy and environmental embodied impacts. A dynamic model for the estimation of building energy consumption during its use phase has been employed, while literature data were adopted for embodied energy and global warming potential impacts. The considered variables refer to the envelope of the building, i.e. external walls and roof insulation and external walls thermal mass. The model was obtained combining EnergyPlus building energy simulator and MOBO, a versatil…

Flexibility Services to Minimize the Electricity Production from Fossil Fuels. A Case Study in a Mediterranean Small Island

2019

The design of multi-carrier energy systems (MESs) has become increasingly important in the last decades, due to the need to move towards more efficient, flexible, and reliable power systems. In a MES, electricity, heating, cooling, water, and other resources interact at various levels, in order to get optimized operation. The aim of this study is to identify the optimal combination of components, their optimal sizes, and operating schedule allowing minimizing the annual cost for meeting the energy demand of Pantelleria, a Mediterranean island. Starting from the existing energy system (comprising diesel generators, desalination plant, freshwater storage, heat pumps, and domestic hot water st…

Energy Saving Optimizing the Ventilation Control in a Big Shopping Center

2018

The paper investigates the potential energy savings in the context of big shopping centers, thanks to the introduction of innovative technologies able to control the ventilation according the real requirement for comfort and health of indoor spaces. The case study analyses a big shopping center, where the ventilation is realized with a centralized air-conditioning plant, working with fixed air flows. Two solutions are proposed to reduce the energy consumption for ventilation. The first considers the installation of heat recovery exchangers, the second the introduction of a control system able to modulate the air exchange, according to the real requirements. An energetic and economic evaluat…

Evaluation of the Administrative Phase-Out of Coal Power Plants on the Italian Electricity Market

2020

Although decarbonisation is one of the most important macro-trends of this century, electricity generation from coal power plants is still broadly common. The main goal of this study is to evaluate the impact of a premature coal power plants phase-out on the Italian day-ahead electricity market. For this purpose, two electricity price forecasts, related to different scenarios between 2019 and 2030, and two different hypotheses for the creation of electricity spot price, were compared. The results from the different scenarios show that coal power plants phase-out determines a small variation in electricity price when bid-up is not considered

Introduction of Offshore Wave, Wind and Solar Energies in Vietnam

2020

In Vietnam, the energy demand shows an ever-increasing trend. To limit the utilization of fossil fuels and the following consequences for the environment, renewable energy sources must be adopted. In this context, the paper assesses the utilization of offshore wind and sea wave, by considering a commercial wind turbine and a prototypical wave energy converter. Solar energy can be optionally also collected by this device. An algorithm is introduced to find the best composition of the three sources able to cover a desired share of energy demand. The approach is applied to Ca Mau, a province in the southern part of Vietnam. Finally, the results encourage the adoption of these energy sources th…

Multi-objective optimization of building life cycle performance. A housing renovation case study in Northern Europe

2020

While the operational energy use of buildings is often regulated in current energy saving policies, their embodied greenhouse gas emissions still have a considerable mitigation potential. The study aims at developing a multi-objective optimization method for design and renovation of buildings incorporating the operational and embodied energy demands, global warming potential, and costs as objective functions. The optimization method was tested on the renovation of an apartment building in Denmark, mainly focusing envelope improvements as roof and exterior wall insulation and windows. Cellulose insulation has been the predominant result, together with fiber cement or aluminum-based cladding …

Ottimizzazione Multi-Obiettivo delle Prestazioni Energetiche e Ambientali di un Edificio Residenziale

2019

Il presente lavoro, svolto nell’ambito dell’Annex 72 dell’International Energy Agency, descrive un approccio metodologico volto all’identificazione di interventi ottimali di ristrutturazione da effettuare sull’involucro di un edificio residenziale, permettendo di minimizzare contemporaneamente quattro funzioni obiettivo: i consumi energetici in fase d’uso, i costi d’investimento e gli impatti energetici e ambientali di ciclo di vita. L’ottimizzazione, eseguita tramite un algoritmo multi-obiettivo, ha permesso di identificare gli spessori di materiale isolante e di materiali massivi da aggiungere sul tetto e sulle pareti perimetrali dell’involucro edilizio per minimizzare le quattro funzioni…

Blockchain-based DR logic: a trade-off between system operator's and customer's needs

2020

This paper describes a way to include the end users of the electrical network in the Demand Response mechanism using the Blockchain technology and the Smart Contract concepts, thus developing a distributed system where customers can communicate directly with the system operator to provide their flexibility in a transparent, secure and traceable way.The historical data on energy consumption and production of the customers is recorded on the Blockchain, with the Smart Contract evaluating the baseline and the potential support that each customer can provide to fulfill the requested load adaptation communicated by the grid operator. The baseline and the optimal power reduction for a customer (e…

Optimizing Renewable Power Management in Transmission Congestion. An Energy Hub Model Using Hydrogen Storage

2021

Energy production from distributed renewable power plants underwent a takeoff in last years as never before. Nevertheless, the installation of technologies based on variable energy resources and their connection on transmission power lines might cause congestions due to the transmission capacity limits. This paper describes the modelization of a HV transmission line with local renewable production and its optimal management through an Energy Hub model. Aim of the study is to identify the optimal size of the power storage, based on an electoryzer, a hydrogen storage and a fuel cell, in order to minimize the congestion risks and to maximize the exploitation of renewable energy production.

Multi-Objective Optimization of Urban Microgrid Energy Supply According to Economic and Environmental Criteria

2019

This study is focused on the optimization of the annual cost and greenhouse impact related to the supply of natural gas and electricity of an urban microgrid through the installation of components as renewable energy sources, energy storage units and converters. As input parameters of the optimization model, the energy demand of a medium density urban district was estimated, while average costs and emissions of equipment were collected in market reports and literature. The outputs of the model are the optimal size and the schedule of each component. Moreover, optimization analysis was carried out for two different scenarios, comparing Italian and Vietnamese energy system cost and environmen…

Multicriteria-Oriented Optimization of Building Energy Performances: The Annex 72 IEA-EBC Experience

2021

International audience; This chapter describes the research experience of the International Energy Agency-Energy in Buildings and Communities Programme Annex 72 members on the application of multi-objective optimization processes for the selection of design or retrofit actions that allow for improving different aspects (energy, environmental, economic, etc.) of buildings in a life cycle perspective. Thirteen case studies were examined focussing on methodologies, applications and results and deriving generic conclusions and guidelines for building designers and decision-makers.

Flexibility Services in a Mediterranean Small Island to Minimize Costs and Emissions Related to Electricity Production from Fossil Fuels

2020

In last years, the energy efficiency in non-interconnected islands became an important topic, since the electricity production is often based on diesel generators, thus contributing to the global warming. Italian government recently emitted two decrees to promote the introduction of renewable energy technologies in 21 non-interconnected islands, both for electrical and thermal uses. In this paper, the economic and environmental feasibility of the introduction of renewable energies in the island of Pantelleria was assessed adopting an optimization approach. Furthermore, the flexibility provided from the local desalination plant and the domestic water heaters was evaluated. The final demands …

Effects of the air density value on a wind generator electricity production capability

2016

The paper main issue is the evaluation of the influence of the air density value on the electricity production capability of a wind generator. Two different density air mathematical models, where the density has not a constant value, are here taken into account and compared in terms of reliability, accuracy and computational burden. Evaluations are carried out thanks to a horizontal axis wind generator full model built by the Authors in Matlab/Simulink environment. Simulation results are compared with real data.

Optimizing the generation system in a microgrid with power, thermal energy and mobility demands

2021

Microgrids are widely known to be the future of generation and distribution systems. This paper presents a method to optimize the size of the main components in a microgrid to supply the demands for electricity, heating and hydrogen for mobility through an Energy Hub model. The electricity production from a wind turbine, a CHP and a fuel cell satisfies the local electricity demand. The green hydrogen produced in the hub from renewable power in off-peak hours is used to feed the fuel cell or to meet the mobility demand. The heating power from CHP and fuel cell is used to feed the local district heating network.

Investigating Energy Saving Potential in a Big Shopping Centre through Ventilation Control

2018

This work shows an example of energy saving interventions on the ventilation system of a big shopping center. This kind of buildings is characterized by high energy consumptions, because of the high level of yearly operating hours and the use of obsolete technologies. In the case study, a big Do It Yourself (DIY) shop located in the southern part of Italy is analyzed, proposing two different approaches aimed at reducing the annual energy consumption for the indoor air exchange of the sales area. In the AS-IS scenario, a centralized HVAC plant, composed by six rooftops, is installed on the roof of sales area, working with fixed airflow value. The first retrofit solution involves the installa…

Life-cycle optimization of building performance: a collection of case studies

2023

The building sector is one of the most impacting on the energy demand and on the environment in developed countries, together with industry and transports. The European Union introduced the topic of nearly zero-energy building (nZEB) and promoted a deep renovations in the existing building stock with the aim of reducing the energy consumption and environmental impacts of the building sector. The design of a nZEB, and in general of a low-energy building, involves different aspects like the economic cost, the comfort indoor, the energy consumption, the life cycle environmental impacts, the different points of view of policy makers, investors and inhabitants. Thus, the adoption of a multicrite…

MULTI-OBJECTIVE OPTIMISATION OF BUILDINGS AND BUILDING CLUSTERS PERFORMANCE: A LIFE CYCLE THINKING APPROACH

2021