0000000000243524
AUTHOR
Vincenzo Li Vigni
showing 12 related works from this author
Proof of Concept of an Irradiance Estimation System for Reconfigurable Photovoltaic Arrays
2015
In order to reduce the mismatch effect caused by non-uniform shadows in PV arrays, reconfigurable interconnections approaches have been recently proposed in the literature. These systems usually require the knowledge of the solar radiation affecting every solar module. The aim of this work is to evaluate the effectiveness of three irradiance estimation approaches in order to define which can be well suited for reconfigurable PV arrays. It is presented a real-time solar irradiance estimation device (IrradEst), implementing the three different estimation methods. The proposed system is based on mathematical models of PV modules enabling to estimate irradiation values by sensing a combination …
Optimization of photovoltaic energy production through an efficient switching matrix
2013
This work presents a preliminary study on the implementation of a new system for power output maximization of photovoltaic generators under non-homogeneous conditions. The study evaluates the performance of an efficient switching matrix and the relevant automatic reconfiguration control algorithms. The switching matrix is installed between the PV generator and the inverter, allowing a large number of possible module configurations. PV generator, switching matrix and the intelligent controller have been simulated in Simulink. The proposed reconfiguration system improved the energy extracted by the PV generator under non-uniform solar irradiation conditions. Short calculation times of the pro…
Dynamic programming and Munkres algorithm for optimal photovoltaic arrays reconfiguration
2015
Abstract In this paper, an original formulation of the control problem for optimal PV array reconfiguration, following a Total Cross Tied layout, is proposed. The formulation follows the well-known subset sum problem, which is a special case of the knapsack problem. The reconfiguration is a measure devoted to mitigate the mismatch effect and maximize the output power of small photovoltaic plants under non-homogeneous working conditions. Therefore, reconfiguration means changing the connections of the solar panels adaptively by a dynamic switching matrix. The control system implements an easy dynamic programming algorithm to change the switches layout. The use of the Munkres assignment metho…
Remote voltage synchronization for wireless Partial Discharge diagnostics
2016
The main objective of this paper is the assessment of the exact phase angle displacement of each Partial Discharge, PD, pulse with respect to the voltage reference waveform. Such problem also referred to as ‘synchronization’ is relevant when the cable is not accessible and the PD measure is carried out in wireless mode. It is well known, that the angle phase shift, due to the propagation phenomenon on the transmission line, can be calculated knowing the line type and length and typical operating conditions of the transmission line. The setup comprises a customized electronic device, the “Phase check”, a server to collect remote measurements and a Look up table to provide corrections to the …
Use of Time-Frequency map combined with DBSCAN algorithm for separation of partial discharge pulses under DC voltage
2022
The Phase-Resolved-Partial-Discharge pattern (PRPD) is a conventional technique used for the evaluation of partial discharges (PD) phenomena in High-Voltage-Alternating-Current (HVAC) systems. This map is constructed by plotting the peak of each detected pulses as a function of the phase angle of the supply voltage. Therefore it is obvious that this technique cannot be used for the analysis of data from PD mesaurement under different supply voltage condition (DC). The aim of this paper is to evaluate the application of the Time-Frequency map (TF map) for the analysis of a dataset obtained from PD measurement under DC voltage. A density-based clustering algorithm was also used to gain more i…
Predictability of PD inception in defects included in HVDC cables by conductivity models calibrated through experiments
2022
To date, there are several methods for calculating the electric field distribution within a dielectric layer subjected to HVDC voltage. However, experimental techniques for evaluating the accuracy of models for calculating the electric field, such as space charge measurement, are often not precise enough to be used for this purpose. At the same time, the knowledge of Partial Discharge (PD) phenomenon occurring under HVDC stress is also not as developed as that of PD under HVAC voltage. The main goal of this research is to study the effectiveness of dielectric conductivity models to forecast the inception condition for PD under load and HVDC voltage stress. This study has been carried out by…
Reconfigurable electrical interconnection strategies for photovoltaic arrays: A review
2014
Non-uniform irradiance significantly decreases the power delivered by solar photovoltaic arrays. A promising technique for compensating these power losses relies on dynamically reconfiguring the electrical connections between photovoltaic modules. This paper presents the current state-of-the-art strategies for photovoltaic array reconfiguration in order to increase the power output under partial shading and mismatch conditions. The different approaches have been compared in terms of effectiveness of the control algorithms, monitored electrical and environmental variables, overall hardware complexity and specific features of each solution. Finally, the most challenging aspects of the reconfi…
Overcoming synchronization issues in wireless technology Partial Discharge measurement
2016
In this paper, several aspects of the fundamentals of wireless Partial Discharge (PD) measurements are first discussed. Then, the relevance of the problem of voltage synchronization in PD wireless diagnosis is outlined. When portable instruments are used for PD detection, the main issue is the voltage measurement at the site where the PD detection is carried out. When such analysis is carried out over shielded cables, the AC (50/60 Hz) voltage reference signal is not easily detectable, while one of the basic parameters for PD diagnosis, the displacement of the inception voltage of the PD as compared to the reference voltage, is not available. Even if highperformance sensors are readily avai…
A Two-End Traveling Wave Fault Location System for MV Cables
2019
In this paper, a new low-cost device is proposed for fault location in power distribution system. The device is part of a system that should include several units installed in couples at the two ends of medium voltage (MV) cable lines. Their low cost justifies a widespread installation of these devices, moreover other functionalities could be considered so as to enrich the potential of the system for MV cables monitoring and asset management. The system exploits a two-end traveling wave technique, low complexity, and low-cost solutions both for the analog front end as well as for the communication infrastructure. A LoRa network is indeed considered as wireless modulation technique perfectly…
An Optimization Device for Series Parallel Connected PV Plants
2017
In this paper it is presented a testing prototype of a reconfiguration system for photovoltaic (PV) plants. The system enables to increase the total energy output by reducing the electrical mismatch between the PV array modules. The architecture of the implemented switching matrix, performing the dynamic electrical interconnections of the PV panels, enables to reconfigure nine solar modules in a series-parallel (SP) configuration. The contribution is organized as follows. A brief state of the art is first presented, followed by a comparison between the SP and Total-Cross-Tied (TCT) connections. The prototype then is thoroughly described as well as the main design choices. Finally some tests…
DESIGN OF A FAULT AND PARTIAL DISCHARGES LOCATION DEVICE FOR CABLE POWER NETWORK
In this thesis, a digital device for fault and on line partial discharge location is presented. The device employs the traveling wave method for two or multiple ends. The designed prototype shows interesting features connected to the low cost and to the possibility to collect data from different locations thus providing additional functionalities deriving from pre-fault and data analysis, relating the existence of defects to the subsequent fault event. The device also enables the acquisition of the temperature on the cable section where the sensor is installed. Such installation can also support DSO and TSO for carrying out both on-event and condition based maintenance, discovering the caus…