Direct Synthesis of Aluminosilicate IWR Zeolite from a Strong Interaction between Zeolite Framework and Organic Template.

A large amount of zeolite structures are still not synthetically available or not available in the form of aluminosilicate currently. Despite significant progress in the development of predictive concepts for zeolite synthesis, accessing some of these new materials is still challenging. One example is the IWR structure as well. Despite successful synthesis of Ge-based IWR zeolites, direct synthesis of aluminosilicate IWR zeolite is still not successful. In this report we show how a suitable organic structure directing agent (OSDA), through modeling of an OSDA/zeolite cage interaction, could access directly the aluminum-containing IWR structure (denoted as COE-6), which might allow access to…

Highly stable and porous porphyrin-based zirconium and hafnium phosphonates – electron crystallography as an important tool for structure elucidation† †Electronic supplementary information (ESI) available: Experimental procedures, analytical data including NMR spectroscopy, Pawley fits, TG, IR, microscopy and sorption measurements. CCDC 1831844. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c8sc01533c

A highly porous and stable Zr-MOF containing a planar porphyrin-based tetraphosphonic acid was synthesized and characterized regarding its sorption properties and chemical stability.

Recent advances in the preparation of zeolites for the selective catalytic reduction of NOx in diesel engines

Metal-exchanged zeolites with small pore sizes have attracted much attention in recent years due to their application in the selective catalytic reduction (SCR) of NOx in diesel engines. Typically, copper-chabazite (e.g. Cu-SSZ-13) has been gradually used as an SCR catalyst in heavy-duty diesel vehicles over the last decade due to its relatively excellent catalytic performance and stability. However, most SSZ-13 zeolites are still prepared via the traditional hydrothermal process in the presence of organic templates, requiring consecutive solid separation and thermal treatment steps to achieve the final zeolite products. In recent years, several strategies for the environmentally friendly p…

Fe-doped Beta zeolite from organotemplate-free synthesis for NH3-SCR of NOx

Two types of Beta zeolites, one from organotemplate-free synthesis with a Si/Al ratio of 9 and the other from a commercial one with a Si/Al ratio of 19, were employed here to dope Fe for NH3-SCR of NOx. Fe-Beta (Si/Al = 9) exhibits much higher activity than Fe-Beta (Si/Al = 19), especially at low-temperature regions (<250 °C). In addition, it also exhibits better hydrothermal stability as compared with Fe-Beta (Si/Al = 19), which demonstrates that it is a promising SCR catalyst with good activity as well as hydrothermal stability. The correlation between the quantitative calculation of the content of isolated Fe3+ in Beta zeolites and the NO conversion rate at 150 °C shows a linear relation…

Improvement of catalytic activity over Cu--Fe modified Al-rich Beta catalyst for the selective catalytic reduction of NOx with NH3

Copper and iron bimetal modified Al-rich Beta zeolites from template-free synthesis were prepared for selective catalytic reduction (SCR) of NOx with NH3 in exhaust gas streams. Comparing to the Cu-based and Fe-based mono-component Beta catalysts, Cu(3.0)-Fe(1.3)-Beta bi-component catalyst shows better low-temperature activity and wider reaction-temperature window. Over 80% of NO conversion can be achieved at the temperature region of 125–500 °C. Due to the synergistic effect of copper and iron evidenced by XRD, UV–Vis–NIR, EPR and XPS measurements, the dispersion state of active components as well as the ratio of Cu2+/Cu+ and Fe3+/Fe2+ were improved over Cu(3.0)-Fe(1.3)-Beta. Isolated Cu2+…

Expanding the Variety of Zirconium‐based Inorganic Building Units for Metal–Organic Frameworks

Two new zirconium-based metal-organic frameworks with the composition [Zr6 O4 (OH)4 (OAc)6 (BDC)3 ] (CAU-26) and [Zr5 O4 (OH)4 (OAc)4 (BDC)2 ] (CAU-27) are reported, which were synthesized from acetic acid, a rarely utilized but green and sustainable solvent (BDC2- : 1,4-benzenedicarboxylate). Structure determination aided by automated electron diffraction tomography revealed that CAU-26 is composed of layers of well-known {Zr6 O8 } clusters interconnected by terephthalate ions. In contrast CAU-27 exhibits a three-dimensional structure with a so far unknown type of one-dimensional inorganic building unit (IBU), which can be rationalized as condensed polyhedron-sharing chains of {Zr6 O8 } cl…

The effect of trivalent framework heteroatoms in Cu-CHA on the Selective Catalytic Reduction of NO

Abstract The effect of the trivalent framework atoms (Si4+/M3+ = 13-105) in Cu exchanged CHA-type zeolites was investigated for the selective catalytic reduction of NO with NH3. While the increased hydrophobicity of B-CHA compared to Al-CHA could make it a good candidate for low temperature SCR, the material was too unstable under reaction conditions and the exchanged Cu2+ did not remain isolated. Consequently a lower activity and selectivity than for Al-CHA were observed. Ga-CHA on the other hand showed a similar Cu2+ speciation as Al-CHA at similar Si4+/M3+ ratios. The difference in catalytic activity was remarkably small. While Ga-CHA was less stable upon hydrothermal aging, this was mar…

Rare-earth ion exchanged Cu-SSZ-13 zeolite from organotemplate-free synthesis with enhanced hydrothermal stability in NH3-SCR of NOx

The relatively low hydrothermal stability of Al-rich Cu-SSZ-13 catalysts hinders their practical application in ammonia selective catalytic reduction (NH3-SCR) reaction. Rare-earth ions were introduced into the Al-rich SSZ-13 zeolite using an organotemplate-free synthesis prior to the exchange of Cu2+ ions. Among the rare-earth ions tested (Ce, La, Sm, Y, Yb), Y shows significant enhancement of the hydrothermal stability and NH3-SCR activities after severe hydrothermal aging at 800 °C for 16 h when compared with Cu-SSZ-13 without Y. Cu–Y-SSZ-13 catalysts with various amounts of Y were prepared, and it is found that with increasing Y content, the low temperature NO conversions can be improve…

Automated Diffraction Tomography for the Structure Elucidation of Twinned, Sub-micrometer Crystals of a Highly Porous, Catalytically Active Bismuth Metal-Organic Framework

Cu-exchanged Al-rich SSZ-13 zeolite from organotemplate-free synthesis as NH3-SCR catalyst: Effects of Na+ ions on the activity and hydrothermal stability

Abstract The relatively low activity at lower temperatures and high cost of SSZ-13 zeolite from organotemplate synthesis are two of major problems of presently commercialized Cu-SSZ-13 catalysts for NH3-SCR reaction. Cu-exchanged Al-rich SSZ-13 catalysts with Si/Al = 4 from organotemplate-free synthesis have been prepared, and show superior NH3-SCR performance with NO conversions above 85% at wide-temperature window ranging from 150 to 650 °C. Cu-Na-SSZ-13 catalysts with varied amount of residual Na+ were prepared by partial ion-exchange of as-prepared Al-rich Na-SSZ-13, and it’s found that Cu-Na-SSZ-13 catalyst with moderate Na+ content can improve both the low-temperature activity and its…

Highly stable and porous porphyrin-based zirconium and hafnium phosphonates – electron crystallography as an important tool for structure elucidation

The Ni-metallated porphyrin-based tetraphosphonic acid (Ni-tetra(4-phosphonophenyl)porphyrin, Ni-H8TPPP) was used for the synthesis of highly porous metal phosphonates containing the tetravalent cations Zr4+ and Hf4+. The compounds were thoroughly characterized regarding their sorption properties towards N2 and H2O as well as thermal and chemical stability. During the synthesis optimization the reaction time could be substantially decreased under stirring from 24 to 3 h in glass vials. M-CAU-30, [M2(Ni-H2TPPP)(OH/F)2]·H2O (M = Zr, Hf) shows exceptionally high specific surface areas for metal phosphonates of aBET = 1070 and 1030 m2 g-1 for Zr- and Hf-CAU-30, respectively, which are very clos…

Transformation synthesis of aluminosilicate SSZ-39 zeolite from ZSM-5 and beta zeolite

Aluminosilicate SSZ-39 zeolite has been successfully prepared by transformation from ZSM-5 and beta zeolite in the presence of N,N-diethyl-cis-2,6-dimethylpiperidinium hydroxide (DMPOH) under hydrothermal conditions. Catalytic tests in the selective catalytic reduction of NOx with NH3 (NH3-SCR) show that the copper-exchanged products synthesized from the interzeolite transformation exhibit excellent catalytic performance.

A Cationic Oligomer as an Organic Template for Direct Synthesis of Aluminosilicate ITH Zeolite

There are a large number of zeolites, such as ITH, that cannot be prepared in the aluminosilicate form. Now, the successful synthesis of aluminosilicate ITH zeolite using a simple cationic oligomer as an organic template is presented. Key to the success is that the cationic oligomer has a strong complexation ability with aluminum species combined with a structural directing ability for the ITH structure similar to that of the conventional organic template. The aluminosilicate ITH zeolite has very high crystallinity, nanosheet-like crystal morphology, large surface area, fully four-coordinated Al species, and abundant acidic sites. Methanol-to-propylene (MTP) tests reveal that the Al-ITH zeo…

Efficient and rapid transformation of high silica CHA zeolite from FAU zeolite in the absence of water

High silica CHA zeolite plays an important role in selective catalytic reduction of NOx with NH3 (NH3-SCR), but its synthesis is not highly efficient due to the use of a relatively high-cost structural directing agent (SDA) N,N,N-trimethyl-adamantammonium hydroxide (TMAdaOH) and relatively long crystallization time under hydrothermal conditions. Herein, we report an efficient and rapid synthesis of a high silica CHA zeolite possessing good crystallinity and uniform crystals (CHA-ST). The method includes interzeolite transformation of high silica FAU zeolite in the absence of water but the presence of zeolite seeds and a bromide form of the SDA. The absence of water in the synthesis signific…

Cu-Exchanged CHA-Type Zeolite from Organic Template-Free Synthesis: An Effective Catalyst for NH3-SCR

A Cu-containing CHA-type zeolite was prepared via aqueous ion exchange of the CHA zeolite from organic template-free synthesis. The thus-obtained template-free Cu-CHA showed the best catalytic perf...

CCDC 1880628: Experimental Crystal Structure Determination

Related Article: Sebastian Leubner, Haishuang Zhao, Niels Van Velthoven, Mickael Henrion, Helge Reinsch, Dirk De Vos, Ute Kolb, Norbert Stock|2019|Angew.Chem.,Int.Ed.|58|10995|doi:10.1002/anie.201905456

CCDC 930933: Experimental Crystal Structure Determination

Related Article: Mark Feyand, Enrico Mugnaioli, Frederik Vermoortele, Bart Bueken, Johannes M. Dieterich, Tim Reimer, Ute Kolb, Dirk de Vos, Norbert Stock|2012|Angew.Chem.,Int.Ed.|51|10373|doi:10.1002/anie.201204963

CCDC 1880629: Experimental Crystal Structure Determination

Related Article: Sebastian Leubner, Haishuang Zhao, Niels Van Velthoven, Mickael Henrion, Helge Reinsch, Dirk De Vos, Ute Kolb, Norbert Stock|2019|Angew.Chem.,Int.Ed.|58|10995|doi:10.1002/anie.201905456

CCDC 1831844: Experimental Crystal Structure Determination

Related Article: Timo Rhauderwiek, Haishuang Zhao, Patrick Hirschle, Markus Döblinger, Bart Bueken, Helge Reinsch, Dirk De Vos, Stefan Wuttke, Ute Kolb, Norbert Stock|2018|Chemical Science|9|5467|doi:10.1039/C8SC01533C