0000000000429332

AUTHOR

Johanna Kärkkäinen

showing 7 related works from this author

Dissolution and hydrolysis of fibre sludge using hydroxyalkylimidazolium hydrogensulphate ionic liquids

2014

Abstract The dissolution and hydrolysis of wet fibre sludge in ionic liquids (ILs) with different reaction conditions are performed in this study. Novel types of hydroxyalkylimidazolium hydrogensulphate ILs, [glymim]HSO 4 , [hemim]HSO 4 and [hpmim]HSO 4 , are especially designed and aimed to combine the dissolution and hydrolysis of wet fibre sludge in a one-step pretreatment. The results were obtained based on the analysis of total reducing sugars (TRS) with the DNS method. The dissolution and hydrolysis of fresh wild horse chestnut fruit ( Aesculus hippocastanum ) with the same ILs were also carried out as a comparison reference. Since fibre sludge is cellulose based and horse chestnut fr…

Aesculus hippocastanumReaction conditionsChromatographyRenewable Energy Sustainability and the EnvironmentStarchForestryHorse chestnutchemistry.chemical_compoundHydrolysischemistryIonic liquidta219CelluloseWaste Management and DisposalAgronomy and Crop ScienceDissolutionta116Biomass and Bioenergy
researchProduct

Task-specific ionic liquid for the depolymerisation of starch-based industrial waste into high reducing sugars

2014

Development of a simple route for the catalytic conversion of starch-based industrial waste (potato peels) and potato starch into reducing sugars was investigated in two ionic liquids for comparison – 1-allyl-3-methylimidazolium chloride [AMIM]Cl and 1-(4-sulfobutyl)-3-methylimidazolium chloride [SBMIM]Cl. Over a two hour period, a 20 wt% solution containing up to 43% and 98% of reducing sugars at low temperature in aqueous [SBMIM]Cl was achieved for the starch-based waste and the potato starch, respectively. In addition, the use of microwave and low frequency ultrasound to perform the depolymerisation of the raw starch-based material was explored and compared with conventional heating proc…

[SDE] Environmental ScienceshydrolyysiStarchtask-specific ionic liquidsultrasoundsChlorideCatalysisIndustrial wasteCatalysismikroaallotchemistry.chemical_compoundHydrolysis[CHIM] Chemical Sciencesmedicine[CHIM]Chemical SciencesOrganic chemistryta116Potato starchComputingMilieux_MISCELLANEOUScarbohydrates reducing sugarsAqueous solutionGeneral Chemistry6. Clean waterchemistry[SDE]Environmental SciencesIonic liquidNuclear chemistrymedicine.drugCatalysis Today
researchProduct

Brønsted and Lewis acid catalyzed conversion of pulp industry waste biomass to levulinic acid

2019

Enormous amounts of fiber sludge are generated annually by the pulp industry as a by-product. As a cellulose-rich material, its current usage, mainly as fuel, is inefficient from a material efficiency point of view. This work studied the utilization of fiber sludge from a Finnish and a Swedish pulp mill as a potential feedstock to produce levulinic acid, a valuable platform chemical. The conversion experiments of fiber sludge to levulinic acid were performed in a microwave reactor with a mixture of H2SO4 and Lewis acid as the catalyst. The reaction conditions, which included reaction time and temperature as well as the H2SO4 and Lewis acid concentrations, were studied in detail. The highest…

Brønsted acidlieteEnvironmental EngineeringsäteilytyshapotBioengineeringlevulinic acidLewis acidcatalytic conversionmassanvalmistuskatalyysihyötykäyttöbiomassa (teollisuus)fiber sludgeWaste Management and Disposalmicrowave irradiationorgaaniset yhdisteet
researchProduct

Conversion of Xylose to Furfural over Lignin-Based Activated Carbon-Supported Iron Catalysts

2020

In this study, conversion of xylose to furfural was studied using lignin-based activated carbon-supported iron catalysts. First, three activated carbon supports were prepared from hydrolysis lignin with different activation methods. The supports were modified with different metal precursors and metal concentrations into five iron catalysts. The prepared catalysts were studied in furfural production from xylose using different reaction temperatures and times. The best results were achieved with a 4 wt% iron-containing catalyst, 5Fe-ACs, which produced a 57% furfural yield, 92% xylose conversion and 65% reaction selectivity at 170 &deg

carbon-supported catalystIron oxidebiokemikaalitXylose010402 general chemistryFurfurallcsh:Chemical technology01 natural sciencesCatalysisCatalysislcsh:Chemistrychemistry.chemical_compoundHydrolysiskatalyytitironmedicineLigninlcsh:TP1-1185Physical and Theoretical Chemistryksyloosi010405 organic chemistryheterogeneous catalystsfurfuraalifurfural0104 chemical scienceschemistrylcsh:QD1-999katalyysiYield (chemistry)xylose conversionActivated carbonmedicine.drugNuclear chemistryCatalysts
researchProduct

Catalytic conversion of glucose to 5-hydroxymethylfurfural over biomass-based activated carbon catalyst

2020

Abstract Selective and efficient dehydration of glucose to 5-hydroxymethylfurfural (HMF) has been widely explored research problem recently, especially from the perspective of more sustainable heterogeneous catalysts. In this study, activated carbon was first produced from a lignocellulosic waste material, birch sawdust. Novel heterogeneous catalysts were then prepared from activated carbon by adding Lewis or Bronsted acid sites on the carbon surface. Prepared catalysts were used to convert glucose to HMF in biphasic water:THF system at 160 °C. The highest HMF yield and selectivity, 51% and 78%, respectively, were obtained in 8 h with a catalytic mixture containing both Lewis and Bronsted a…

Chemistrychemistry.chemical_elementBiomass02 engineering and technologyGeneral Chemistry010402 general chemistry021001 nanoscience & nanotechnology01 natural sciencesCatalysis0104 chemical sciencesCatalysisvisual_artYield (chemistry)medicinevisual_art.visual_art_mediumOrganic chemistrySawdust0210 nano-technologySelectivityBrønsted–Lowry acid–base theoryCarbonActivated carbonmedicine.drugCatalysis Today
researchProduct

Catalytic conversion of glucose to 5-hydroxymethylfurfural over biomass-based activated carbon catalyst

2020

Selective and efficient dehydration of glucose to 5-hydroxymethylfurfural (HMF) has been widely explored research problem recently, especially from the perspective of more sustainable heterogeneous catalysts. In this study, activated carbon was first produced from a lignocellulosic waste material, birch sawdust. Novel heterogeneous catalysts were then prepared from activated carbon by adding Lewis or Brønsted acid sites on the carbon surface. Prepared catalysts were used to convert glucose to HMF in biphasic water:THF system at 160 °C. The highest HMF yield and selectivity, 51% and 78%, respectively, were obtained in 8 h with a catalytic mixture containing both Lewis and Brønsted acid sites…

5-hydroxymethylfurfuralaktiivihiiliActivated carbonCatalystGlucose conversion
researchProduct

Dissolution and hydrolysis of fibre sludge using hydroxyalkylimidazolium hydrogensulphate ionic liquids

2014

The dissolution and hydrolysis of wet fibre sludge in ionic liquids (ILs) with different reaction conditions are performed in this study. Novel types of hydroxyalkylimidazolium hydrogensulphate ILs, [glymim]HSO4, [hemim]HSO4 and [hpmim]HSO4, are especially designed and aimed to combine the dissolution and hydrolysis of wet fibre sludge in a one-step pretreatment. The results were obtained based on the analysis of total reducing sugars (TRS) with the DNS method. The dissolution and hydrolysis of fresh wild horse chestnut fruit (Aesculus hippocastanum) with the same ILs were also carried out as a comparison reference. Since fibre sludge is cellulose based and horse chestnut fruit is starch ba…

lignoselluloosahydrolyysidissolutionhorse chestnut fruitionic liquidfibre sludge
researchProduct