0000000000535615

AUTHOR

A. Albizane

Separation of motor oils, oily wastes and hydrocarbons from contaminated water by sorption on chrome shavings

In this paper, the ability of chrome shavings to remove motor oils, oily wastes and hydrocarbons from water has been studied. To determine amount of hydrocarbons sorbed on tanned wastes, a FT-NIR methodology was used and a multivariate calibration based on partial least squares (PLS) was employed for data treatment. The light density, porous tanned waste granules float on the surface of water and remove hydrocarbons and oil films. Wastes fibers from tannery industry have high sorption capacity. These tanned solid wastes are capable of absorbing many times their weight in oil or hydrocarbons (6.5-7.6g of oil and 6.3g of hydrocarbons per gram of chrome shavings). The removal efficiency of the…

research product

Immobilization of vegetable tannins on tannery chrome shavings and their use for the removal of hexavalent chromium from contaminated water

Abstract Chestnut (C) and mimosa (M) tannins immobilized on chrome shavings (CS) as an adsorbent have been proposed to be an efficient and economical alternative in hexavalent chromium removal from aqueous solutions. The adsorption of hexavalent chromium onto chrome shavings-tannin (CS-T) adsorbents was performed using batch equilibrium technique at 25 ± 2 °C. The effect of pH is highly important especially in the case of high concentrations of hexavalent chromium. The maximum chromium uptake was obtained at pH 4. Two hours of contact time are enough to reach equilibrium. Sorption of chromium on CS-T was found to follow a pseudo-second order kinetic model (with correlation coefficients grea…

research product

Kinetic, isotherm and thermodynamic studies of the adsorption of methylene blue dye onto agro-based cellulosic materials

AbstractThe purpose of this work is to establish the optimal experimental conditions for the removal of methylene blue (MB-as model basic dye) from aqueous solution by adsorption onto four agro-based materials, namely, cedar sawdust, pine sawdust, wheat straw, and Provence cane Arundo donax. Results show that an increase in acidity or ionic strength of the medium has generally a negative effect on the discoloration yield. From the data of pH effect, there is no need to change the initial pH of the MB solution to be treated. Equilibrium was reached after 20−30 min of agitation when cedar sawdust, pine sawdust, and Provence cane are used as adsorbents. However, in the case of wheat straw, an …

research product

Management of tannery wastewaters: treatment of spent chrome tanning bath and vegetable tanning effluents

Abstract In this work, a chain of treatment processes was proposed and described in order to reach better management of mineral and vegetable tannery wastewaters. First, chromium was precipitated from the spent chrome tanning bath by sodium hydroxide (NaOH) and then reformulated to form a complex of basic chromium sulfate which was tested successfully in mineral tanning process. On the other hand, the supernatant recovered after precipitation of chromium with NaOH was used to dilute vegetable tanning wastewaters characterized by a high concentration of polyphenols (about 2,574 mg/L). Diluted effluent was then treated by liming and tangential microfiltration using a ceramic membrane based on…

research product