Transition to turbulence in toroidal pipes

2011

AbstractIncompressible flow in toroidal pipes of circular cross-section was investigated by three-dimensional, time-dependent numerical simulations using a finite volume method. The computational domain included a whole torus and was discretized by up to ${\ensuremath{\sim} }11. 4\ensuremath{\times} 1{0}^{6} $ nodes. Two curvatures $\delta $ (radius of the cross-section/radius of the torus), namely 0.3 and 0.1, were examined; a streamwise forcing term was imposed, and its magnitude was made to vary so that the bulk Reynolds number ranged between ${\ensuremath{\sim} }3500$ and ${\ensuremath{\sim} }14\hspace{0.167em} 700$. The results were processed by different techniques in order to confirm…

A Comparison of Direct Numerical Simulation and Turbulence Models for Liquid Metal Free Convection in Volumetrically Heated Enclosures

1999

Hydraulic Characterization of the Full Scale Mock-Up of the DEMO Divertor Outer Vertical Target

2021

In the frame of the pre-conceptual design activities of the DEMO work package DIV-1 “Divertor Cassette Design and Integration” of the EUROfusion program, a mock-up of the divertor outer vertical target (OVT) was built, mainly in order to: (i) demonstrate the technical feasibility of manufacturing procedures; (ii) verify the hydraulic design and its capability to ensure a uniform and proper cooling for the plasma facing units (PFUs) with an acceptable pressure drop; and (iii) experimentally validate the computational fluid-dynamic (CFD) model developed by the University of Palermo. In this context, a research campaign was jointly carried out by the University of Palermo and ENEA to experimen…

Turbulence structure and budgets in curved pipes

2013

Abstract Turbulent flow in curved pipes was investigated by Direct Numerical Simulation. Three curvatures δ (pipe radius a /curvature radius c ) were examined: δ  = 0 (straight pipe), simulated for validation and comparison purposes; δ  = 0.1; and δ  = 0.3. The friction velocity Reynolds number (based on the pipe radius a ) was 500 in all cases, yielding bulk Reynolds numbers of ∼17,000, ∼15,000 and ∼12,000 for δ  = 0, 0.1 and 0.3, respectively. The computational domain was ten pipe radii in length and was resolved by up to 20 × 10 6 hexahedral finite volumes. The time step was chosen equal to a wall time unit; 1 Large Eddy TurnOver Time (LETOT) was thus resolved by 500 time steps and simul…

Simulazioni Numeriche del Campo di Moto e della Caduta di Pressione in Tubi Elicoidali

2009

An analytical model of heat transfer and fluid dynamic performances of an unconventional NTR engine for manned interplanetary missions

2009

Abstract An analytical model of fluid flow and heat transfer of a Nuclear Thermal Rocket (NTR) engine concept is presented. The engine is based on the direct conversion of the kinetic energy of the fission fragments (FFs) into the propellant enthalpy. The FFs can escape from an extremely thin layer of fissionable material: a sufficiently large surface coated with few micrometers of Americium 242m, confined by a neutron moderator–reflector, may become a critical reactor. Three dimensional coupled CFD-Monte Carlo simulations have already been presented in Di Piazza and Mulas (2006) . In this paper, an analytical integral 1-D model of fluid dynamics and heat transfer is built in order to fores…

Investigation of the Cooling of Hot Walls by Liquid Water Sprays

1999

An experimental study was conducted for the heat transfer from hot walls to liquid water sprays. Four full cone, swirl spray nozzles were used at different upstream pressures, giving mass fluxes impinging on the wall, G, from 8 to 80 kg m(-2) s(-1), mean droplet velocities, U, from 13 to 28 m s(-1) and mean droplet diameters, D, from 0.4 to 2.2 mm. A target consisting of two slabs of beryllium-copper alloy, each 4 x 5 cm in size and 1.1 mm thick, was electrically heated to about 300 degrees C and then rapidly and symmetrically cooled by water sprays issuing from two identical nozzles. The midplane temperature was measured by a fast response, thin-foil thermocouple and the experimental data …

Heat Transfer in Low-Prandtl Number Free Convection from Internally Heated Rectangular Enclosures

2000

MHD free convection in a liquid-metal filled cubic enclosure. I. Differential heating

2002

Low-Prandtl Number Natural Convection in Volumetrically Heated Rectangular Enclosures - II. Square Cavity, AR=1

2001

A GENERAL COMPUTATIONAL APPROACH FOR MAGNETOHYDRODYNAMIC FLOWS USING THE CFX CODE: BUOYANT FLOW THROUGH A VERTICAL SQUARE CHANNEL

2000

The buoyancy-driven magnetoconvection in the cross section of an infinitely long vertical square duct is investigated numerically using the CFX code package. The implementation of a magnetohydrodynamic (MHD) problem in CFX is discussed, with particular reference to the Lorentz forces and the electric potential boundary conditions for arbitrary electrical conductivity of the walls. The method proposed is general and applies to arbitrary geometries with an arbitrary orientation of the magnetic field. Results for fully developed flow under various thermal boundary conditions are compared with asymptotic analytical solutions. The comparison shows that the asymptotic analysis is confirmed for hi…

A Computational Approach to Conjugate Heat Transfer between Two Fluids in Plate Heat Exchangers of Arbitrary Geometry

2002

Filtering of the Navier-Stokes Equations in the Context of Time-Dependent Flows

1998

MHD free convection in a liquid-metal filled cubic enclosure. II. Internal heating

2002

The buoyancy-driven magnetohydrodynamic flow in a liquid-metal filled cubic enclosure was investigated by three-dimensional numerical simulation. The enclosure was differentially heated at two opposite vertical walls, all other walls being adiabatic, and a uniform magnetic field was applied orthogonal to the temperature gradient and to the gravity vector. The Rayleigh number was 105 and the Prandtl number was 0.0321 (characteristic of Pb–17Li at 573 K). The Hartmann number was made to vary between 102 and 103 and the electrical conductance of the walls between 0 and ∞. The continuity, momentum and enthalpy transport equations, in conjunction with a Poisson equation for the electric potentia…

Natural Convection in Liquid Metal-Filled Rectangular Enclosures with Volumetric Heating

1998

A General Computational Approach for Magnetohydrodynamic Flows Using the CFX Code: Buoyant Flow through a Vertical Square Channel

2000

The buoyancy-driven magnetoconvection in the cross section of an infinitely long vertical square duct is investigated numerically using the CFX code package. The implementation of a magnetohydrodynamic (MHD) problem in CFX is discussed, with particular reference to the Lorentz forces and the electric potential boundary conditions for arbitrary electrical conductivity of the walls. The method proposed is general and applies to arbitrary geometries with an arbitrary orientation of the magnetic field. Results for fully developed flow under various thermal boundary conditions are compared with asymptotic analytical solutions. The comparison shows that the asymptotic analysis is confirmed for hi…

Low-Prandtl Number Natural Convection in Volumetrically Heated Rectangular Enclosures - I. Slender Cavity, AR=4

2000

Numerical prediction of turbulent flow and heat transfer in helically coiled pipes

2010

Abstract Computational results were obtained for turbulent flow and heat transfer in curved pipes, representative of helically coiled heat exchangers. Following a grid refinement study, grid independent predictions from alternative turbulence models ( k – ɛ , SST k – ω and RSM– ω ) were compared with DNS results and experimental pressure drop and heat transfer data. Using the SST k – ω and RSM– ω models, pressure drop results were in excellent agreement with literature data and the Ito correlation. For heat transfer, the literature is not comparably complete or accurate, but a satisfactory agreement was obtained in the range of available data. Unsatisfactory results, both for pressure drop …