Six-years-long effects of the Italian policies for photovoltaics on the grid parity of grid-connected photovoltaic systems installed in urban contexts

2017

Abstract The purpose of this study is investigating the grid parity (GP) time and the levelized cost of energy (LCOE) of grid-connected photovoltaic (PV) systems installed in densely urbanized contexts. The analysis, which was elaborated for three Italian cities, considered the effects of the promoting policies enacted by the Italian government from June 2010 to May 2016. An appropriate methodology was applied with the aim of realistically defining the energy produced by PV systems installed on buildings with different roof types and number of floors. The calculus of the disbursements considered the operating, maintenance and insurance costs and the wear of PV panels and inverters. The resu…

Effects of the Italian financial crisis on the photovoltaic dissemination in a southern city

2013

Abstract The aim of this paper is to estimate how the profitability of grid-connected PV (photovoltaic) systems may vary month by month due to the changes in all parameters involved in the economic evaluation (discount rate, PV electricity selling price, inflation rate, price of PV devices etc.). The effects of these variations were investigated for a district of a city in the South Italy (Palermo). The results of the analysis provided the trend of the actual coverage of the district power demand from June 2010 to August 2012. In particular the load match index, which considers the daily energy demand covered by PV systems, ranged from almost 30% to less than 12%, which is less than the val…

A procedure to calculate the five-parameter model of crystalline silicon photovoltaic modules on the basis of the tabular performance data

2013

Abstract Only few manufactures provide the wide set of graphical data that are necessary to use high performance predictive tools for PV systems. On the other hand, reliable graphical data require accurate laboratory measurements that increase manufacturing costs. For this reason PV system designers have to choose between the use of cheap PV modules, lacking in technical data, and the reliable energy predictions that are possible only if the current–voltage characteristics are provided by the PV module manufacturers. This paper describes the procedure to evaluate the parameters of a one-diode equivalent circuit able to accurately represent the electrical behaviour of a PV panel by means of …

Six-years-long effects of the Italian policies for photovoltaics on the pay-back period of grid-connected PV systems installed in urban contexts

2017

Abstract In this study the discounted pay-back (DPB) period of rooftop photovoltaic (PV) systems installed in urban contexts was investigated during the course of time with the aim of evaluating the effects of the different supporting policies enacted by the Italian government. The profitability of the investment in three Italian cities was observed from June 2010 to May 2016 by means of an exhaustive economic analysis based on the study of the variation of the costs and benefits during the lifetime of the investment. The analysis considered the disbursements for the PV system devices, maintenance and management, insurance, and wear of PV panels and inverters. Other significant parameters, …

A methodology for evaluating the flexibility potential of domestic air-conditioning systems

2020

The paper presents a methodology for quantifying the electrical flexibility potential of air-conditioning systems (ACS) installed in residential buildings according to the building envelope characteristics and the ACS performance. In order to provide a thorough analysis of the issue, the ACS baseline consumption referred to the indoor temperature of 24°C has been computed for three typical residential buildings built in the South of Italy over different periods. The baseline consumption was used as a reference to estimate the effect of the set point temperature change on the ACS power profile. The results showed that increasing the set-point temperature of ACS by 2°C and 4°C leads to a redu…

Assessment of the Usability and Accuracy of Two-Diode Models for Photovoltaic Modules

2017

Many diode-based equivalent circuits for simulating the electrical behaviour of photovoltaic (PV) cells and panels are reported in the scientific literature. Two-diode equivalent circuits, which require more complex procedures to calculate the seven model parameters, are less numerous. The model parameters are generally calculated using the data extracted from the datasheets issued by the PV panel manufactures and adopting simplifying hypotheses and numerical solving techniques. A criterion for rating both the usability and accuracy of two-diode models is proposed in this paper with the aim of supporting researchers and designers, working in the area of PV systems, to select and use a model…

Review of the energy and economic parameters involved in the effectiveness of grid-connected PV systems installed in multi-storey buildings

2014

Abstract The assessment of PV energy in an urban context is extremely complex because many factors have to be considered. Moreover, when the purpose is calculating the realistic amount of the electricity demand of a city that can be covered by the photovoltaic generation, it is necessary to estimate the number of photovoltaic systems whose installation is economically advantageous. Such a topic requires an economic analysis, which is affected by the number of energy and economic parameters involved and the values assigned to them to perform calculations. Some parameters are perfectly known and unvarying, like the paid incentives. Adversely, some parameters, like the efficiency degradation o…

A procedure to evaluate the seven parameters of the two-diode model for photovoltaic modules

2019

Abstract The paper presents an analytical procedure to calculate the seven parameters of the two-diode model of photovoltaic (PV) panels for any value of the solar irradiance and cell temperature. Six parameters (the photocurrent, the diode reverse saturation currents, the quality factor of the first diode and the series and shunt resistances), are evaluated by solving the equations related to the properties of the main points of the current-voltage (I-V) characteristics. The further information, necessary to calculate the entire set of seven truly independent parameters, is based on two conditions that have to be simultaneously satisfied: 1) the exclusion of negative values of the model pa…

Assessment of the Usability and Accuracy of the Simplified One-Diode Models for Photovoltaic Modules

2016

Models for photovoltaic (PV) cells and panels, based on the diode equivalent circuit, have been widely used because they are effective tools for system design. Many authors have presented simplified one-diode models whose three or four parameters are calculated using the data extracted from the datasheets issued by PV panel manufactures and adopting some simplifying hypotheses and numerical solving techniques. Sometimes it may be difficult to make a choice among so many models. To help researchers and designers working in the area of photovoltaic systems in selecting the model that is fit for purpose, a criterion for rating both the usability and accuracy of simplified one-diode models is p…

Assessment of Energy and Economic Effectiveness of Photovoltaic Systems Operating in a Dense Urban Context

2013

A methodology that permits testing the level of integration of the photovoltaic technology in urban areas is presented. The percentage of coverage of the electricity demand of grid-connected photovoltaic systems installed on the roofs of buildings were investigated in a district of the city of Palermo (Sicily). After classifying roofs according to their shape, orientation and pitch by means of satellite images provided by Google Earth, the ratio of the productivity of the PV systems and the consumption of electricity of the households was analysed. The results of the energy assessment have been screened considering the economic feasibility of grid-connected photovoltaic systems: the energy …

Air quality and relative humidity in commercial aircrafts: an experimental investigation on short-haul domestic flights

2013

Abstract Nowadays the achievement of a comfortable environment in aircraft cabins is a factor of paramount importance in air travel business competition; on the other hand, the need of reducing the propulsion fuel cost has driven the airline companies to adopt air handling systems that may reduce the levels of thermal comfort and air quality inside the cabins of commercial airliners. With the aim of contributing to a better knowledge of this matter, this paper reports the results of an experimental study upon the indoor air quality aboard commercial aircrafts for 14 domestic flights less than 1 h and half long. The parameters monitored were temperature, relative humidity and carbon dioxide …

The recent change in the Italian policies for photovoltaics: Effects on the payback period and levelized cost of electricity of grid-connected photov…

2015

Abstract This paper provides an economic analysis of the investment in grid-connected PV (photovoltaic) systems installed on the rooftops of buildings located in densely urbanised contexts. The analysis was applied to some case studies that were selected as representative of the latitudes of the southern, central and northern Italy. The returns of the investment in PV systems were investigated with the aim of comparing the impact of the current PV policy, based on the tax credit scheme, with the FIT (feed-in tariff) scheme, in force until July 2013. The cash flows related to the disbursements and benefits during the lifetime of the investment were computed for each combination of orientatio…

An Italian input–output model for the assessment of energy and environmental benefits arising from retrofit actions of buildings

2013

Abstract The paper presents an energy and environmental extended input–output model combined with the life cycle assessment, applied to assess the energy and environmental benefits arising from the Italian policy of tax deduction for energy retrofit actions of buildings. The study allowed to assess the advantages due to the above policy, taking into account both direct and indirect energy saving and avoided CO 2 emissions obtained with the retrofit actions and indirect energy consumption and related CO 2 emissions due to the realization of the above actions. Moreover, the authors defined an original model to assess the indirect rebound effect caused by the energy saving actions. The obtaine…

A Criterion for Rating the Usability and Accuracy of the One-Diode Models for Photovoltaic Modules

2016

In selecting a mathematical model for simulating physical behaviours, it is important to reach an acceptable compromise between analytical complexity and achievable precision. With the aim of helping researchers and designers working in the area of photovoltaic systems to make a choice among the numerous diode-based models, a criterion for rating both the usability and accuracy of one-diode models is proposed in this paper. A three-level rating scale, which considers the ease of finding the data used by the analytical procedure, the simplicity of the mathematical tools needed to perform calculations and the accuracy achieved in calculating the current and power, is used. The proposed criter…

An improved photographic method to estimate the shading effect of obstructions

2012

Abstract A new photographic method is presented to evaluate the shading effects of obstructions on surfaces exposed to the sun. The method overcomes the difficulties caused by the need to accurately describe the surrounding objects to estimate the shading effects by means of the usual tools that use the spatial reconstruction of obstructions or cylindrical or polar suncharts. The photographs of the surrounding objects are used as the background on which the solar disc is depicted at the various hours of the day. In this way it is easily detectable if the sun is visible from the place where the photographs were taken or if the surrounding obstructions obscure the sun. In spite of the complex…

The Recent Change in the Italian Policies for Photovoltaics: Effects on the Energy Demand Coverage of Grid-Connected PV Systems Installed in Urban Co…

2016

In July 2013, the Italian photovoltaic (PV) support policies changed the feed-in tariff (FIT) mechanism and turned to a tax credits program, which is currently in force. The aim of this paper is to investigate how such a radical change has influenced the electricity demand coverage of the PV systems installed in urban contexts. A methodology, which connects the economic assessment to a detailed architectural and energy suitability analysis, was applied to some case studies to analyse the relationships between the physical parameters related to multi-storey buildings (roof shapes, number of floors and area of flats) and the most relevant economic and financial features affecting the viabilit…

An improved five-parameter model for photovoltaic modules

2010

This paper presents a new five-parameter model capable of analytically describing the I–V characteristic of a photovoltaic module for each generic condition of operative temperature and solar irradiance. The parameters of the equivalent electrical circuit are extracted by solving a system of equations based on data commonly issued by manufacturers in standard rating conditions with a trial and error process. The procedure, which does not require any special equations solver, can be easily coded into a short software routine using simple languages and finds the solution of the system of equations with the desired accuracy without needing to be guided towards solutions starting from fitted in…

Load mismatch of grid-connected photovoltaic systems: Review of the effects and analysis in an urban context

2013

Abstract The mismatch between generated and consumed electricity is a relevant topic of the energy and economic assessment of photovoltaic (PV) systems. Due to the load mismatch some amount of PV electricity may be exported to the grid because the electrical demand is temporarily lower than production, whereas a consumption, which is higher than production and/or that does not match the available PV generation, will require to be supplemented by the public grid electricity. The presence of the load mismatch can cause the effect of disadvantageously purchasing electricity from the grid and/or squandering the unexploited PV energy. If only a very small part of the PV generation is used to sup…

Five-years-long effects of the Italian policies for photovoltaics on the energy demand coverage of grid-connected PV systems installed in urban conte…

2016

Abstract The paper examines the responsiveness of the electricity demand coverage in urban contexts to the changes in the Italian policies for PV systems. The morphological configuration of building roofs according to the number of covered flats, annual data of PV generation and electricity consumptions were considered in the transition from the feed-in tariff (FIT) mechanism to the tax credits scheme currently in force. With the aim of assessing the changes over time in three representative cities, the fluctuations both in the premiums for the produced electricity and the tax credits applied to the PV system costs were observed from July 2010 to February 2016. Furthermore, the main time-va…

Electricity demand response schemes in China: Pilot study and future outlook

2021

Abstract Electricity demand response (DR) improves the overall energy management efficiency and allows for the integration of large-scale renewable energy into the power grid through interactive management and control of the supply and demand sides. However, in China and other emerging countries (e.g., Japan and Australia) with DR programs, the DR market mechanism is not well-established. This is particularly the situation in countries where the state power system is not freely open to participate in the DR market. Previous research has proven that considerable DR resources are largely existing in the demand side; however, the dearth of a market mechanism hinders the development of DR. Henc…

A procedure to calculate the I–V characteristics of thin-film photovoltaic modules using an explicit rational form

2015

Abstract Accurate models of the electrical behaviour of photovoltaic modules are effective tools for system design. One or two diode equivalent circuits have been widely used even though some mathematical difficulties were found dealing with implicit equations. In this paper, a new model based on a simple rational function, which does not contain any implicit exponential form, is presented. The model was conceived in order to be used with thin-film photovoltaic modules, whose current–voltage curves are characterised by very smooth shapes. The parameters of the model are evaluated by means of the derivatives of the issued characteristics in the short circuit and open circuit points at standa…

A correlation linking the predicted mean vote and the mean thermal vote based on an investigation on the human thermal comfort in short-haul domestic…

2015

Abstract The results of an experimental investigation on the human thermal comfort inside the cabin of some Airbus A319 aircrafts during 14 short-haul domestic flights, linking various Italian cities, are presented and used to define a correlation among the predicted mean vote (PMV), a procedure which is commonly used to assess the thermal comfort in inhabited environments, and the equivalent temperature and mean thermal vote (MTV), which are the parameters suggested by the European Standard EN ISO 14505-2 for the evaluation of the thermal environment in vehicles. The measurements of the radiant temperature, air temperature and relative humidity during flights were performed. The air temper…

Corrigendum to “A procedure to calculate the five-parameter model of crystalline silicon photovoltaic modules on the basis of the tabular performance…

2014

Only few manufactures provide the wide set of graphical data that are necessary to use high performance predictive tools for PV systems. On the other hand, reliable graphical data require accurate laboratory measurements that increase manufacturing costs. For this reason PV system designers have to choose between the use of cheap PV modules, lacking in technical data, and the reliable energy predictions that are possible only if the current–voltage characteristics are provided by the PV module manufacturers. This paper describes the procedure to evaluate the parameters of a one-diode equivalent circuit able to accurately epresent the electrical behaviour of a PV panel by means of the minimu…

A photographic method to estimate the shading effect of obstructions

2012

Abstract A new, simplified photographic method is proposed to estimate the shading effects of obstructions. In spite of the complex mathematical background of the new tool, its practical application is very simple, and only requires the measurements of three angles for each photograph. The proposed method is particularly useful for overcoming the difficulties caused by the need to accurately describe surrounding objects to estimate shading effects. The new method uses the information contained in a picture and allows one to draw daily solar paths directly on the photograph. The procedure is useful to verify the suitability of a generic site for solar exploitation; its main benefit is the si…

SOSTENIBILITA’ AMBIENTALE E SIMULAZIONI ENERGETICHE DELL’EDIFICIO MICCICHE’ A CEFALU’

2009

ANALISI DELLA PRODUCIBILITA’ ENERGETICA DI IMPIANTI FOTOVOLTAICI IN CONTESTI URBANI

2011

L’obiettivo del lavoro proposto è la definizione di una metodologia che consenta di testare il livello di integrazione della tecnologia fotovoltaica in contesti urbani ad alta densità edilizia. Il criterio adottato mira all’analisi contestuale dell’aspetto energetico, mediante valutazione della percentuale di copertura del fabbisogno di energia elettrica richiesto, e della convenienza economica degli impianti fotovoltaici installati sulle coperture degli edifici. A tal fine, per un quartiere della città di Palermo, sono state poste in relazione le superfici effettivamente disponibili all’installazione dei pannelli e il numero di utenze presenti. Le coperture, censite grazie all’ausilio dell…

UN METODO FOTOGRAFICO PER LA STIMA DELL’EFFETTO OMBREGGIANTE DOVUTO ALLE OSTRUZIONI

2011

Poggioreale di Sicilia: an emergency in real opportunity: model research for eco-sustainable planning

2006

Poggioreale is a small town located in the inland portion of western Sicily. The project proposes to utilize climatic and physics elements how tools of sustainable development

L'ombreggiamento dovuto alle ostruzioni Un nuovo metodo fotografico

2013

A new, simplified photographic method is proposed to estimate the shading effects of obstructions. In spite of the complex mathematical background of the new tool, its practical application is very simple, and only requires the measurements of three angles for each photograph. The proposed method is particularly useful for overcoming the difficulties caused by the need to accurately describe surrounding objects to estimate shading effects. The new method uses the information contained in a picture and allows one to draw daily solar paths directly on the photograph. The procedure is useful to verify the suitability of a generic site for solar exploitation; its main benefit is the simplicity …

VALIDAZIONE SPERIMENTALE DI UN MODELLO DI SIMULAZIONE DEL COMPORTAMENTO TERMICO ED ELETTRICO DI PANNELLI FOTOVOLTAICI PIANI

2009

Valutazione mediante tecnica fotografica dell'oscuramento della radiazione solare dovuto alle ostruzioni

2010

Si propone un nuovo metodo che consente di utilizzare l’immagine fotografica di ostacoli ombreggianti per valutarne l’effetto oscurante nei confronti della radiazione solare diretta incidente su di una superficie. Il metodo proposto è simile a quello che prevede l’impiego del diagramma cilindrico dei percorsi solari, calcolati in funzione dell’azimuth e dell’altezza solare, e la sovrapposizione su di esso del poligono raffigurante l’oggetto ostruente costruito in base alle coordinate cilindriche dei suoi punti più significativi. La nuova procedura prevede invece la sovrapposizione sulla fotografia del percorso solare opportunamente trasformato secondo le regole della prospettiva. E’ così po…

Analysis of photovoltaic potential in urban areas: the effect of the eurozone financial crisis

2012

The aim of this paper is to estimate how the profitability of grid-connected PV systems may vary month by month due to the changes in all parameters involved in the economic evaluation (discount rate, PV electricity selling price, inflation rate, price of PV devices etc.). The effects of these variations were investigated for a district of a city in the South Italy (Palermo) by means of a methodology appropriately defined to explore the architectural morphology of buildings and evaluate the solar potential of PV systems installed on roofs. The results of the analysis provide the trend of the actual coverage of the district power demand from June 2010 to March 2011. Finally, a sensitivity an…

A NEW FIVE-PARAMETER MODEL FOR PHOTOVOLTAIC PANELS- DETERMINATION OF COMMERCIAL MODULES I-V CHARACTERISTICS

2010

UN METODO FOTOGRAFICO PER LA STIMA DELL’EFFETTO OMBREGGIANTE DOVUTO ALLE OSTRUZIONI

2011

Si propone un nuovo metodo che consente di utilizzare l’immagine fotografica di ostacoli ombreggianti per valutarne l’effetto oscurante nei confronti della radiazione solare diretta incidente su di una superficie. Il metodo descritto è simile a quello che prevede l’impiego del diagramma cilindrico dei percorsi solari, calcolati in funzione dell’azimut e dell’altezza solare, e la sovrapposizione su di esso del poligono raffigurante l’oggetto ostruente costruito in base alle coordinate cilindriche dei suoi punti più significativi. La nuova procedura prevede invece la sovrapposizione sulla fotografia del percorso solare opportunamente trasformato secondo le regole della prospettiva. E’ così po…

Demand response e flessibilità energetica degli edifici residenziali

2021