SEGREGATION CONTROL AT DIRECTIONAL SOLIDIFICATION USING MAGNETIC FIELD AND ELECTRIC CURRENT

2015

International audience

Electroslag process for better titanium deposition morphology

2018

Permanent magnet dipole stirrer for aluminium furnaces

2018

Use of permanent magnet systems for metallurgical applications have been proposed before. We have continued development of such systems by investigation use of single magnetic dipole which is realized as permanent magnet cylinder. Magnet is magnetized orthogonal to its axis and has been mounted to the side of the liquid metal reservoir. System first was modelled using small scale experiment with galinstan melt. Velocity distributions and flow patterns in reservoir using Ultrasound Doppler Anemometer were acquired and will be presented here. Additionally, numerical model using Comsol and Cenos modelling software were developed alongside analytical, non-dimensional estimation calculations. Ex…

Influence on the macrosegregation of binary metallic alloys by thermoelectromagnetic convection and electromagnetic stirring combination

2014

International audience; Influence of a slowly rotating 0.5 T transverse magnetic field on the directionally solidified metallic alloy has been experimentally studied in this work. Main idea is to study an influence on the melt flow and material structure caused by the simultaneous electromagnetic stirring and thermoelectromagnetic convection with comparable magnitudes. Electromagnetic stirring and thermoelectromagnetic convection intensities have been estimated analytically to find optimal experimental parameters. It is experimentally demonstrated that with such an interaction it is possible to modify component macrosegregation of Sn-10 wt% Pb alloy. Helical macrosegregation within cylindri…

Casting technology for ODS steels – dispersion of nanoparticles in liquid metals

2017

Dispersion of particles to produce metal matrix nanocomposites (MMNC) can be achieved by means of ultrasonic vibration of the melt using ultrasound transducers. However, a direct transfer of this method to produce steel composites is not feasible because of the much higher working temperature. Therefore, an inductive technology for contactless treatment by acoustic cavitation was developed. This report describes the samples produced to assess the feasibility of the proposed method for nano-particle separation in steel. Stainless steel samples with inclusions of TiB2, TiO2, Y2O3, CeO2, Al2O3 and TiN have been created and analyzed. Additional experiments have been performed using light metals…

ABSOLUTE THERMOELECTRIC POWER OF Pb–Sn ALLOYS

2011

International audience; In this work, absolute thermoelectric power (ATP) of Pb, Sn, Pb-20 wt.% Sn, Pb-40 wt.% Sn, Pb-60 wt.% Sn, Pb-80 wt.% Sn are measured. Measurements are performed in a temperature gradient furnace from 20 degrees C to 500 degrees C, for both solid and liquid states. Temperatures are measured with T-type copper-constantan thermocouples, while voltage signal between copper electrodes of those thermocouples is recorded in order to calculate ATP of the sample metal.

Direct chill casting of aluminium alloys under electromagnetic interaction by permanent magnet assembly

2018

Direct chill casting is one of the methods used in industry to obtain good microstructure and properties of aluminium alloys. Nevertheless, for some alloys grain structure is not optimal. In this study, we offer the use of electromagnetic interaction to modify melt convection near the solidification interface. Solidification under various electromagnetic interactions has been widely studied, but usually at low solidification velocity and high thermal gradient. This type of interaction may succeed fragmentation of dendrite arms and transport of solidification nuclei thus leading to improved material structure and properties. Realization of experimental small-scale crystallizer and electromag…

Nanoparticle dispersion in liquid metals by electromagnetically induced acoustic cavitation

2016

Abstract Aim of this study is to investigate experimentally the effect of magnetically induced cavitation applied for the purpose of nanoparticle dispersion in liquid metals. The oscillating magnetic force due to the azimuthal induction currents and the axial magnetic field excites power ultrasound in the sample. If the fields are sufficiently high then it is possible to achieve the acoustic cavitation threshold in liquid metals. Cavitation bubble collapses are known to create microscale jets with a potential to break nanoparticle agglomerates and disperse them. The samples are solidified under the contactless ultrasonic treatment and later analyzed by electron microscopy and energy-dispers…

Thermoelectric current and magnetic field interaction influence on the structure of directionally solidified Sn-10 wt.%Pb alloy

2013

International audience; In this experimental work Sn-10 wt.% Pb alloy is directionally solidified in Bridgman setup at various growth velocities (from 0.5 mu m/s to 20 mu m/s) under transverse 0.4 T magnetic field. Temperature gradient of 8 K/mm is maintained perpendicular to the solidification direction during experiments. Liquid phase convection and its influence on the structure and segregation of an alloy, caused by magnetic field and thermoelectric current interaction (thermoelectromagnetic convection or TEMC) is studied experimentally and estimated theoretically in this work. Detailed velocity order of magnitude estimation is carried out. Besides optical microscopy, component distribu…

Permanent magnet centrifugal pump for liquid aluminium stirring

2016

In liquid aluminium processing, it is important to ensure continuous mixing of the molten metal to ensure temperature and composition homogeneity, and to improve degassing of the metal. Aluminium and its alloys are often processed in special degassing chambers after preparation in order to avoid segregation and to improve material structure, and to avoid gas pores. This extra step increases material costs and may cause material contamination. In this article, we present the idea to use centrifugal permanent magnet stirrer to induce liquid aluminium motion through thick furnace wall by creating high-speed local liquid metal jet. Analytical estimation, numerical modelling and experimental tes…

Metodes izstrāde un izpēte termo-EDS noteikšanai šķidros metāliskos sakausējumos

2007

Darbā gaitā izveidota iekārta precīzai un vienkāršai absolūtā termo-EDS mērīšanai šķidriem metāliem. Iekārtas pamatā ir zonde, kas sastāv no diviem atšķirīgiem elektrodu pāriem, kas šķidrajā metālā atrodas punktos ar dažādu temperatūru. Nomērot spriegumus starp elektrodiem tiek aprēķināts šķidrā metāla absolūtais termo-EDS. Termoelektriskajām parādībām var būt ļoti nozīmīga loma šķidruma kristalizācijas laikā. Vairāku komponenšu maisījumā koncentrācijas neviendabību dēļ kristalizācijas fronte nav gluda, kas noved pie nevienmērīgas struktūras veidošanās. Uz kristalizācijas frontes mazos garuma mērogos pastāvošais temperatūras gradients var izraisīt spēcīgas termostrāvas, kas mijiedarbojoties…