0000000001080980
AUTHOR
Richard Catherall
showing 16 related works from this author
On-line implementation and first operation of the Laser Ion Source and Trap at ISOLDE/CERN
2015
13 pags.; 12 figs.; 2 tab.; Open Access funded by CERN
On-line yields obtained with the ISOLDE RILIS
2003
The ISOLDE resonance ionization laser ion source (RILIS) allows to ionize efficiently and selectively many metallic elements. In recent yield surveys and on-line experiments with the ISOLDE RILIS we observed 23–34 Mg, 26–34 Al, 98–132 Cd, 149 Tb, 155–177 Yb, 179–200 Tl, 183–215 Pb and 188–218 Bi. The obtained yields are presented together with measured release parameters which allow to extrapolate the release efficiency towards more exotic (short-lived) nuclides of the same elements. 2002 Elsevier Science B.V. All rights reserved.
Advances in surface ion suppression from RILIS: Towards the Time-of-Flight Laser Ion Source (ToF-LIS)
2016
Abstract We present results from the development towards the Time-of-Flight Laser Ion Source (ToF-LIS) aiming for the suppression of isobaric contaminants through fast beam gating. The capability to characterize high resistance ion sources has been successfully demonstrated. A ninefold selectivity gain has been achieved through suppression of surface ionized potassium, while maintaining >90% transmission for laser-ionized gallium using a thin wall graphite ionizer cavity combined with a fast beam gate. Initial results from the investigation of glassy carbon as a potential hot cavity ion source are presented. Power-cycle tests of a newly designed mount for fragile ion source cavities indicat…
Light exotic isotopes: recent beam developments and physics applications at ISOLDE
2002
This paper is divided in three parts: (i) the measurement of yields and decay losses of Li and Be isotopes released from a thin foil tantalum target at the CERN/ISOLDE PS-Booster; (ii) results from beta-decay experiments on Be-12 and Be-14, an improved half-life of 21.49(3) ms has been obtained for Be-12; (iii) the beta-decay of C-9. An outline of the analysis procedure to determine the branching at high excitation energies is given. The ground-state branch has been determined to 54.1(15)%.
Measurement of the Be7(n,p) cross section at thermal energy
2019
The Be7(n,p) cross section was measured with an ion-implanted Be7 target at a thermal neutron beam of the research reactor LVR-15 in Řež. The cross section to the ground state of Li7 is σ(n,p0)=43800±1400b and the cross section to the first excited state of Li7 is σ(n,p1)=520±260b.
Enhancing the extraction of laser-ionized beams from an arc discharge ion source volume
2018
© 2018 The Author(s) The Versatile Arc Discharge and Laser Ion Source (VADLIS) is a recently established ion source for the CERN-ISOLDE radioactive ion beam facility. It offers either electron-impact ionization (VADIS-mode) or resonance laser ionization (RILIS-mode). The choice of operating mode depends on the element of interest or the required beam purity. Particle-in-cell simulations using the VSim software show that the ion extraction efficiency of the VADLIS in RILIS-mode can be improved if it is equipped with an insulated extractor plate, to which an optimal voltage can be applied. This enables optimization of the RILIS-mode ion extraction independently of the electron density. Experi…
Dealing with contaminants in Coulomb excitation of radioactive beams
2020
Abstract Data analysis of the Coulomb excitation experiment of the exotic 206Hg nucleus, recently performed at CERN’s HIE-ISOLDE facility, needs to account for the contribution to target excitation due to the strongly-present beam contaminant 130Xe. In this paper, the contamination subtraction procedure is presented.
Production of radioactive Ag ion beams with a chemically selective laser ion source
1997
Abstract We have developed a chemically selective laser ion source at the CERN-ISOLDE facility in order to study neutron-rich Ag nuclides. A pulsed laser system with high repetition rate has been used based on high-power coppe-vapour pump lasers and dye lasers. With this source significant reductions of the isobaric background has been achieved.
The LIEBE high-power target: Offline commissioning results and prospects for the production of 100Sn ISOL beams at HIE-ISOLDE
2020
Abstract With the aim of increasing the primary beam intensity in the next generation Radioactive Ion Beam facilities, a major challenge is the production of targets capable of dissipating high beam power, particularly for molten targets. In that context, a direct molten loop target concept was proposed for short-lived isotopes for EURISOL. The circulation of molten metal enables the production of droplets enhancing the radioisotope diffusion. The concept also includes a heat exchanger ensuring thermal equilibrium under interaction with high proton beam power. A target prototype, named LIEBE, has been designed and assembled to validate this concept in the ISOLDE operation environment. The p…
Quadrupole deformation of Xe-130 measured in a Coulomb-excitation experiment
2020
Physical review / C 102(5), 054304 (2020). doi:10.1103/PhysRevC.102.054304
Off-line commissioning of the ISOLDE cooler
2007
International audience; Among the multiple progresses in radioactive ion beam (RIB) manipulation for physics experiments, the beam cooling and bunching in gas-filled RF traps has become a widely used technique. It is particularly well adapted to precision experiments, such as Penning trap mass spectrometry or collinear laser spectroscopy. At ISOLDE, an rf quadrupole cooler and ion buncher (RFQCB) has been designed and developed to deliver radioactive beams of improved quality among most of the on-line experiments. The results of the first off-line tests have shown that high transmission efficiencies could be achieved with different RIBs of alkali metals, as it was expected. During the later…
CERN-MEDICIS: A Review Since Commissioning in 2017
2021
The CERN-MEDICIS (MEDical Isotopes Collected from ISolde) facility has delivered its first radioactive ion beam at CERN (Switzerland) in December 2017 to support the research and development in nuclear medicine using non-conventional radionuclides. Since then, fourteen institutes, including CERN, have joined the collaboration to drive the scientific program of this unique installation and evaluate the needs of the community to improve the research in imaging, diagnostics, radiation therapy and personalized medicine. The facility has been built as an extension of the ISOLDE (Isotope Separator On Line DEvice) facility at CERN. Handling of open radioisotope sources is made possible thanks to i…
First application of the Laser Ion Source and Trap (LIST) for on-line experiments at ISOLDE
2012
The Laser Ion Source and Trap (LIST) provides a new mode of operation for the resonance ionization laser ion source (RILIS) at ISOLDE/CERN, reducing the amount of surface-ionized isobaric contaminants by up to four orders of magnitude. After the first successful on-line test at ISOLDE in 2011 the LIST was further improved in terms of efficiency, selectivity, and reliability through several off-line tests at Mainz University and at ISOLDE. In September 2012, the first on-line physics experiments to use the LIST took place at ISOLDE. The measurements of the improved LIST indicate more than a twofold increase in efficiency compared to the LIST of the 2011 run. The suppression of surface-ionize…
Blurring the boundaries between ion sources: The application of the RILIS inside a FEBIAD type ion source at ISOLDE
2016
For the first time, the laser resonance photo-ionization technique has been applied inside a FEBIAD-type ion source at an ISOL facility. This was achieved by combining the ISOLDE RILIS with the ISOLDE variant of the FEBIAD ion source (the VADIS) in a series of off-line and on-line tests at CERN. The immediate appli- cations of these developments include the coupling of the RILIS with molten targets at ISOLDE and the introduction of two new modes of FEBIAD operation: an element selective RILIS mode and a RILIS + VADIS mode for increased efficiency compared to VADIS mode operation alone. This functionality has been demonstrated off-line for gallium and barium and on-line for mercury and cadmi…
Study of Low Work Function Materials for Hot Cavity Resonance Ionization Laser Ion Sources
2008
The selectivity of a hot cavity resonance ionization laser ion source (RILIS) is most often limited by contributions from competing surface ionization on the hot walls of the ionization cavity. In this article we present investigations on the properties of designated high-temperature, low-work function materials regarding their performance and suitability as cavity material for RILIS. Tungsten test cavities, impregnated with a mixture of barium oxide and strontium oxide (BaOSrO on W), or alternatively gadolinium hexaboride (GdB6) were studied in comparison to a standard tungsten RILIS cavity as being routinely used for hot cavity laser ionization at ISOLDE. Measurement campaigns took place …
First operational experience of HIE-ISOLDE
2016
The High Intensity and Energy ISOLDE project (HIE-ISOLDE)* is a major upgrade of the ISOLDE facility at CERN. The energy range of the post-accelerator will be extended from 2.85 MeV/u to 9.3 MeV/u for beams with A/q = 4.5 (and to 14.3 MeV/u for A/q = 2.5) once all the cryomodules of the superconducting accelerator are in place. The project has been divided into different phases, the first of which (phase 1a) finished in October 2015 after the hardware and beam commissioning were completed**. The physics campaign followed with the delivery of both radioactive and stable beams to two different experimental stations. The characteristics of the beams (energies, intensities, time structure and b…