0000000001125193
AUTHOR
D. Bernardi
showing 15 related works from this author
Thermo-mechanical analysis of irradiation swelling and design optimization of the IFMIF target assembly with bayonet backplate
2017
Abstract The availability of a high flux neutron source for testing candidate materials under irradiation conditions, which will be typically encountered in future fusion power reactors (ITER, DEMO, FPR), is a fundamental step towards the development of fusion energy. To this purpose, the International Fusion Materials Irradiation Facility (IFMIF) represents the reference option to provide the fusion community with a DEMO-relevant neutron source capable of irradiating samples at a damage rate of up to 20 dpa/fpy (in steel) in a volume of 0.5 l. In the framework of the engineering design activities of IFMIF, ENEA is committed in the design of the lithium target assembly (TA) with removable (…
Start-up and shutdown thermomechanical transient analyses of the IFMIF European lithium target system
2014
In the framework of the current IFMIF Engineering Validation and Engineering Design Activities (IFMIF/EVEDA) phase, ENEA is responsible for the design of the European concept of the IFMIF lithium target system which foresees the possibility to periodically replace only the most irradiated and thus critical component (i.e., the backplate) while continuing to operate the rest of the target for a longer period (bayonet backplate concept). With the objective of evaluating the performances of the system in terms of temperature, stress and displacement fields evolution during start-up and shutdown phases, an uncoupled thermomechanical transient analysis has been performed in close collaboration w…
Assessment of Fatigue Effects Induced by Fast Beam Transients in the IFMIF-DONES Li Target
2020
One of the crucial steps toward the commercial exploitation of fusion energy is the availability of a high-intensity neutron source able to test and qualify structural materials to be used in future fusion power reactors. The International Fusion Materials Irradiation Facility-DEMO Oriented NEutron Source (IFMIF-DONES) facility, which is currently being designed within the framework of the EUROfusion Consortium, represents the European effort to develop such a neutron source. It employs a liquid lithium target struck by an accelerated deuteron (D+) beam to produce fusion-like neutrons used to irradiate materials samples. So far, a detailed investigation of the thermomechanical behavior of t…
Analytical and Numerical Assessment of Thermally Induced Pressure Waves in the IFMIF-DONES Liquid-Lithium Target
2020
The intended steady-state operation conditions of the International Fusion Materials Irradiation Facility-DEMO Oriented Neutron Source (IFMIF-DONES) target system are based on the D+ beam stationary running at full nominal power (5 MW). Nevertheless, critical situations can occur in the case of unavoidable sudden events like beam trips. The instantaneous variation in the heating power deposited in lithium when the beam is rapidly switched between ON-and OFF-states leads to thermal expansion, which is compensated by the compression of the target material, resulting in locally high pressures and a pressure wave propagating through the target toward the back wall. Besides the tensile stress of…
Determination of a pre-heating sequence for the DONES Target Assembly
2021
Abstract Within the activities promoted by the EUROfusion consortium in support of the design and construction of the DEMO Oriented NEutron Source (DONES), a mock-up of its Target Assembly (TA), based on the configuration with a “bayonet” Back-Plate (BP) and available at ENEA Brasimone labs, is being adopted for the execution of experimental activities aiming at the validation of specific aspects of the target design. Despite the “integral”-TA concept is the current reference, experimental tests concerning the TA pre-heating phase are not significantly affected by the TA concept and are still representative even though conducted on the bayonet-TA concept. Indeed, the main objective of the p…
On the thermomechanical behavior of the European target assembly design of IFMIF-EVEDA lithium test loop under start-up transient scenarios
2013
Uncoupled thermomechanical transient analyses have been carried out to investigate the behavior of IFMIF-EVEDA lithium test loop bayonet backplate target assembly under two selected start-up transient operational scenarios. The first transient scenario considered foresees that the target assembly, starting from the initial uniform temperature of 50 C, is heated up uniquely by convective heat transfer with lithium, flowing from inlet to outlet nozzle at its reference nominal temperature and pressure, until its nominal steady state thermal field distribution is reached. The second transient scenario foresees, more realistically, that the target assembly, starting from the uniform temperature …
The design of the DONES lithium target system
2019
Abstract In the framework of the EU fusion roadmap implementing activities, an accelerator-based Li(d,xn) neutron source called DONES (Demo-Oriented early NEutron Source) is being designed within the EUROfusion Work Package Early Neutron Source as an essential irradiation facility for testing candidate materials for DEMO reactor and future fusion power plants. DONES will employ a high speed liquid lithium jet struck by a 125 mA, 40 MeV deuteron beam to generate the intense neutron flux used to irradiate the material samples up to the desired level of displacement damage (˜10 dpa/fpy for iron in 0.3 l) and He production rates (˜10-13 appm He/dpa). In order to rapidly achieve a sound and stab…
Engineering design and steady state thermomechanical analysis of the IFMIF European lithium target system
2013
In the framework of the current IFMIF Engineering Validation and Engineering Design Activities (IFMIF/EVEDA) phase, ENEA is responsible for the design of the European concept of the IFMIF lithium target system which foresees the possibility to periodically replace only the most irradiated and thus critical component (i.e., the backplate) while continuing to operate the rest of the target for a longer period (bayonet backplate concept). In this work, the results of the steady state thermomechanical analysis of the IFMIF EU target assembly are briefly reported highlighting the relevant indications obtained with respect to the fulfillment of the design requirements. © 2013 IEEE.
Thermomechanical analysis supporting the preliminary engineering design of DONES target assembly
2018
Abstract The design of the Demo Oriented NEutron Source (DONES) is the main objective of the Work Package Early Neutron Source (WPENS) of EUROfusion Power Plant Physics and Technology (PPPT) programme. DONES is an IFMIF-based neutron source with the goal of testing and qualifying candidate materials to be used in DEMO and future fusion power plants. In the framework of these activities, a research campaign has been carried out at the University of Palermo, in close cooperation with ENEA labs, in order to assess the thermomechanical performances of the DONES target system, endowed with an integrated Target Assembly (TA) when it undergoes the thermomechanical loads typical of its nominal oper…
Design, manufacturing and testing of a fast disconnecting system for the European target assembly concept of IFMIF
2013
The International Fusion Materials Irradiation Facility (IFMIF) will be equipped with a lithium target assembly to produce the required neutron flux for the irradiation of candidate fusion materials up to a damage rate of 100 dpa (cumulated damage in five years). The present European target assembly design is based on the so called replaceable backplate bayonet concept that was developed with the objective to simplify the maintenance operations for its refurbishment/replacement and to reduce the material for disposal as well. To this purpose it was also conceived to be attached to the lithium pipes and to the beam line by means of remotely operated connections based on clamped flanges with …
Analysis of the thermomechanical behavior of the IFMIF bayonet target assembly under design loading scenarios
2015
In the framework of the IFMIF Engineering Validation and Engineering Design Activities (IFMIF/EVEDA) phase, ENEA is responsible for the design of the European concept of the IFMIF lithium target system which foresees the possibility to periodically replace only the most irradiated and thus critical component (i.e., the backplate) while continuing to operate the rest of the target for a longer period (the so-called bayonet backplate concept). In this work, the results of the steady state thermomechanical analysis of the IFMIF bayonet target assembly under two different design loading scenarios (a "hot" scenario and a "cold" scenario) are briefly reported highlighting the relevant indications…
The European contribution to the development and validation activities for the design of IFMIF lithium facility
2013
The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-driven intense neutron source where candidate materials for fusion reactors will be tested and validated. The high energy neutron flux is produced by means of two deuteron beams (total current of 250 mA, energy of 40 MeV) that strikes a liquid lithium target circulating in a lithium loop of IFMIF plant. The European (EU) contribution to the development of the lithium facility comprises five procurement packages, as follow: (1) participation to the experimental activities of the EVEDA lithium test loop in Oarai (Japan); (2) study aimed at evaluating the corrosion and erosion phenomena, promoted by lithium, for …
SARS-CoV-2 vaccination modelling for safe surgery to save lives: data from an international prospective cohort study
2021
Abstract Background Preoperative SARS-CoV-2 vaccination could support safer elective surgery. Vaccine numbers are limited so this study aimed to inform their prioritization by modelling. Methods The primary outcome was the number needed to vaccinate (NNV) to prevent one COVID-19-related death in 1 year. NNVs were based on postoperative SARS-CoV-2 rates and mortality in an international cohort study (surgical patients), and community SARS-CoV-2 incidence and case fatality data (general population). NNV estimates were stratified by age (18–49, 50–69, 70 or more years) and type of surgery. Best- and worst-case scenarios were used to describe uncertainty. Results NNVs were more favourable in su…
Early outcomes and complications following cardiac surgery in patients testing positive for coronavirus disease 2019: An international cohort study
2021
The outbreak of severe acute respiratory syndromecoronavirus-2, the cause of coronavirus disease 2019 (COVID-19) in December 2019 represented a global emergency accounting for more than 2.5 million deaths worldwide.1 It has had an unprecedented influence on cardiac surgery internationally, resulting in cautious delivery of surgery and restructuring of services.2 Understanding the influence of COVID-19 on patients after cardiac surgery is based on assumptions from other surgical specialties and single-center studies. The COVIDSurg Collaborative conducted a multicenter cohort study, including 1128 patients, across 235 hospitals, from 24 countries demonstrating perioperative COVID-19 infection…
Machine learning risk prediction of mortality for patients undergoing surgery with perioperative SARS-CoV-2: the COVIDSurg mortality score
2021
The British journal of surgery 108(11), 1274-1292 (2021). doi:10.1093/bjs/znab183