Vacuum deposited perovskite solar cells employing dopant-free triazatruxene as the hole transport material

2017

Abstract Planar perovskite solar cells using organic charge selective contacts were fabricated. In a vacuum deposited perovskite-based solar cell, dopant and additive free triazatruxene as the hole transport layer was introduced for device fabrication. High open-circuit voltage of 1090 mV was obtained using methylammonium lead iodide (Eg=1.55 eV) as light harvesting material, thus representing a loss of only 460 mV which is in close vicinity of mature silicon technology (400 mV). The devices showed a very competitive photovoltaic performance, monochromatic incident photon-to-electron conversion efficiency of 80% and the power conversion efficiencies in excess of 15% were measured with a neg…

Vapor-Deposited Perovskites: The Route to High-Performance Solar Cell Production?

2017

Summary High-quality semiconducting perovskites can be easily synthesized through several methods. The ease of fabrication has favored the adoption of lab-scale solution-processing techniques, which have yielded the highest performing devices. Most of these processes, however, are not directly applicable to larger scale and volume preparations, hindering the consolidation and market entry of this technology. Vapor-based methods, a mature technology widely adopted in the coating and semiconductor industry, could change this trend. Their application to perovskite solar cells includes a large amount of fabrication approaches, offering versatility in the employed materials as well as in the cha…

Green phosphorescence and electroluminescence of sulfur pentafluoride-functionalized cationic iridium(III) complexes

2015

EZ-C acknowledges the University of St Andrews for financial support. We report four cationic iridium(III) complexes [Ir(C^N)2(dtBubpy)](PF6) that have sulfurpentafluoride-modified 1-phenylpyrazole and 2-phenylpyridine cyclometalating (C^N) ligands (dtBubpy = 4,4'-di-tert-butyl-2,2'-bipyridyl). Three of the complexes were characterized by single-crystal X-ray structure analysis. In cyclic voltammetry, the complexes undergo reversible oxidation of iridium(III) and irreversible reduction of the SF5 group. They emit bright green phosphorescence in acetonitrile solution and in thin films at room temperature, with emission maxima between 482–519 nm and photoluminescence quantum yields of up to 7…

Highly Stable Red-Light-Emitting Electrochemical Cells

2017

The synthesis and characterization of a series of new cyclometalated iridium(III) complexes [Ir(ppy) 2 (N ∧ N)][PF 6 ] in which Hppy = 2-phenylpyridine and N ∧ N is (pyridin-2-yl)benzo[ d ]thiazole ( L1 ), 2-(4-( tert -butyl)pyridin-2-yl)benzo[ d ]thiazole ( L2 ), 2-(6-phenylpyridin-2-yl)benzo[ d ]thiazole ( L3 ), 2-(4-( tert -butyl)-6-phenylpyridin-2-yl)benzo[ d ]thiazole ( L4 ), 2,6-bis(benzo[ d ]thiazol-2-yl)pyridine ( L5 ), 2-(pyridin-2-yl)benzo[ d ]oxazole ( L6 ), or 2,2′-dibenzo[ d ]thiazole ( L7 ) are reported. The single crystal structures of [Ir(ppy) 2 ( L1 )][PF 6 ]·1.5CH 2 Cl 2 , [Ir(ppy) 2 ( L6 )][PF 6 ]·CH 2 Cl 2 , and [Ir(ppy) 2 ( L7 )][PF 6 ] have been determined. The new com…

[Ir(C^N)2(N^N)]+ emitters containing a naphthalene unit within a linker between the two cyclometallating ligands

2016

The synthesis of four cyclometallated [Ir(C^N) 2 (N^N)][PF 6 ] compounds in which N^N is a substituted 2,2’- -bipyridine (bpy) ligand and the naphthyl-centred ligand 2,7-bis(2-(2-(4-(pyridin-2-yl)phenoxy)ethoxy) ethoxy)naphthalene provides the two cyclometallating C^N units is reported. The iridium( III ) complexes have been characterized by 1 H and 13 C NMR spectroscopies, mass spectrometry and elemental analysis, and their electrochemical and photophysical properties are described. Comparisons are made with a model [Ir(ppy) 2 (N^N)][PF 6 ] compound (Hppy = 2-phenylpyridine). The complexes containing the naphthyl-unit exhibit similar absorption spectra and excitation at 280 nm leads to an …

Removing Leakage and Surface Recombination in Planar Perovskite Solar Cells

2019

Thin-film solar cells suffer from various types of recombination, of which leakage current usually dominates at lower voltages. Herein, we demonstrate first a three-order reduction of the shunt loss mechanism in planar methylammonium lead iodide perovskite solar cells by replacing the commonly used hole transport layer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with a better hole-selective polyarylamine. As a result, these cells exhibit superior operation under reduced light conditions, which we demonstrate for the extreme case of moonlight irradiance, at which open-circuit voltages of 530 mV can still be obtained. By the shunt removal we also observe the VOC to dro…

Vacuum Deposited Triple-Cation Mixed-Halide Perovskite Solar Cells

2018

Hybrid lead halide perovskites are promising materials for future photovoltaics applications. Their spectral response can be readily tuned by controlling the halide composition, while their stability is strongly dependent on the film morphology and on the type of organic cation used. Mixed cation and mixed halide systems have led to the most efficient and stable perovskite solar cells reported, so far they are prepared exclusively by solution-processing. This might be due to the technical difficulties associated with the vacuum deposition from multiple thermal sources, requiring a high level of control over the deposition rate of each precursor during the film formation. In this report, the…

Persistent photovoltage in methylammonium lead iodide perovskite solar cells

2014

Open circuit voltage decay measurements are performed on methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells to investigate the charge carrier recombination dynamics. The measurements are compared to the two reference polymer-fullerene bulk heterojunction solar cells based on P3HT:PC60BM and PTB7:PC70BM blends. In the perovskite devices, two very different time domains of the voltage decay are found, with a first drop on a short time scale that is similar to the organic solar cells. However, two major differences are also observed. 65-70% of the maximum photovoltage persists on much longer timescales, and the recombination dynamics are dependent on the illumination intensity.

Working mechanisms of vacuum-deposited perovskite solar cells

2018

Selenophene-Based Hole-Transporting Materials for Perovskite Solar Cells

2021

Two novel and simple donor-π-bridge-donor (D-π-D) hole-transporting materials (HTMs) containing two units of the p-methoxytriphenylamine (TPA) electron donor group covalently bridged by means of the 3,4-dimethoxyselenophene spacer through single and triple bonds are reported. The optoelectronic and thermal properties of the new selenium-containing HTMs have been determined using standard experimental techniques and theoretical density functional theory (DFT) calculations. The selenium-based HTMs have been incorporated in mesoporous perovskite solar cells (PSCs) in combination with the triple-cation perovskite [(FAPbI3 )0.87 (MAPbBr3 )0.13 ]0.92 [CsPbI3 ]0.08 . Limited values of power conver…

Improving Perovskite Solar Cells: Insights From a Validated Device Model

2017

To improve the efficiency of existing perovskite solar cells (PSCs), a detailed understanding of the underlying device physics during their operation is essential. Here, a device model has been developed and validated that describes the operation of PSCs and quantitatively explains the role of contacts, the electron and hole transport layers, charge generation, drift and diffusion of charge carriers and recombination. The simulation to the experimental data of vacuum-deposited CH3NH3PbI3 solar cells over multiple thicknesses has been fit and the device behavior under different operating conditions has been studied to delineate the influence of the external bias, charge-carrier mobilities, e…

Phosphomolybdic acid as an efficient hole injection material in perovskite optoelectronic devices.

2018

Efficient perovskite devices consist in a perovskite film sandwiched in between charge selective layers, in order to avoid non-radiative recombination. A common metal oxide used as p-type or hole transport layer is molybdenum oxide. MoO3 is of particular interest for its very large work function, which allows it to be used both as an interfacial charge transfer material as well as a dopant for organic semiconductors. However, high quality and high work function MoO3 is typically thermally evaporated in vacuum. An alternative solution-processable high work function material is phosphomolybdic acid (PMA), which is stable, commercially available and environmentally friendly. In this communicat…

High efficiency single-junction semitransparent perovskite solar cells

2014

Semitransparent perovskite solar cells with a high power conversion efficiency (PCE) above 6% and 30% full device transparency have been achieved by implementing a thin perovskite layer and a simple foil compatible layout.

Photovoltaic devices employing vacuum-deposited perovskite layers

2015

Organic–inorganic perovskites have emerged as one of the most promising materials for future optoelectronics applications, most notably photovoltaics. The achievement of high-efficiency solar cells has been possible mainly through the understanding of the perovskite formation during the solution deposition of thin films. Vacuum deposition methods have also been developed and have intrinsic advantages over solution-based processing, including control over the film thickness and composition, low-temperature processing, and the possibility of preparing multilayer structures. This article summarizes the latest advances in the vacuum deposition of hybrid perovskites, with an emphasis on the appl…

Fully Vacuum-Processed Wide Band Gap Mixed-Halide Perovskite Solar Cells

2017

Methylammonium lead mixed-halide perovskites MAPb(BrxI1–x)3 are promising materials for the preparation of tandem devices. When exposed to light, MAPb(BrxI1–x)3 segregates in iodide- and bromide-rich phases, limiting the achievable photovoltage and hence the attainable device efficiency. To date only solution-processed mixed-halide perovskites have been demonstrated. We present fully vacuum-deposited mixed-halide perovskite thin films with band gap of 1.72 and 1.87 eV, prepared by controlling the deposition rates of the different halide precursors. When used in thin-film devices, these materials lead to power conversion efficiencies of 15.9 and 10.5%, respectively, which are among the highe…

Exploring the effect of the cyclometallating ligand in 2-(pyridine-2-yl)benzo[d]thiazole-containing iridium(III) complexes for stable light-emitting …

2018

The preparation and characterization of a series of iridium(III) ionic transition-metal complexes for application in light-emitting electrochemical cells (LECs) are reported. The complexes are of the type [Ir(C^N)2(N^N)][PF6] in which C^N is one of the cyclometallating ligands 2-(3-(tert-butyl)phenyl)pyridine (tppy), 2-phenylbenzo[d]thiazole (pbtz), 1-phenyl-1H-pyrazole (ppz) and 1-phenylisoquninoline (piq), and N^N is 2-(pyridine-2-yl)benzo[d]thiazole (btzpy). The variation in the C^N ligands allows the HOMO energy level to be tuned, leading to HOMO–LUMO gaps in the range 2.76–3.01 eV and values of Eox1/2 of 0.81–1.11 V. In solution, the complexes are orange to deep-red emitters (λmax in t…

Efficient wide band gap double cation – double halide perovskite solar cells

2017

In this work we study the band gap variation and properties of the perovskite compound Cs0.15FA0.85Pb(BrxI1−x)3 as a function of the halide composition, with the aim of developing an efficient complementary absorber for MAPbI3 in all-perovskite tandem devices. We have found the perovskite stoichiometry Cs0.15FA0.85Pb(Br0.7I0.3)3 to be a promising candidate, thanks to its band gap of approximately 2 eV. Single junction devices using this perovskite absorber lead to a maximum PCE of 11.5%, among the highest reported for solar cells using perovskites with a band gap wider than 1.8 eV.

Recombination in Perovskite Solar Cells

2017

Trap-assisted recombination, despite being lower as compared with traditional inorganic solar cells, is still the dominant recombination mechanism in perovskite solar cells (PSCs) and limits their efficiency. We investigate the attributes of the primary trap assisted recombination channels (grain boundaries and interfaces) and their correlation to defect ions in PSCs. We achieve this by using a validated device model to fit the simulations to the experimental data of efficient vacuum-deposited p-i-n and n-i-p CH3NH3PbI3 solar cells, including the light intensity dependence of the open circuit voltage and fill factor. We find that, despite the presence of traps at interfaces and grain bounda…

Interface engineering in efficient vacuum deposited perovskite solar cells

2016

Abstract We studied the effect of the charge transport layers in p-i-n perovskite solar cells using vacuum deposited methylammonium lead iodide thin-film absorbers. While solution-processed perovskite films are frequently deposited directly on PEDOT:PSS leading to good solar cell performances, in some cases even to very good Voc values, we show that in devices employing vacuum deposited MAPbI3 perovskites, the removal of the polyTPD electron blocker substantially reduces the photovoltaic behavior. This is indicative of rather different charge transport properties in the vacuum deposited MAPbI3 perovskites compared to those prepared from solution. On the other hand, we investigated the use o…

Fully Evaporated High Efficiency Single Junction and Tandem Perovskite based Solar Cells.

2018

Trap-Assisted Non-Radiative Recombination in Organic-Inorganic Perovskite Solar Cells

2015

Fullerene imposed high open-circuit voltage in efficient perovskite based solar cells

2016

Five different commercially available fullerenes are evaluated as hole blocking/electron transporting materials in p–i–n methylammonium lead iodide perovskite solar cells using a vacuum deposited perovskite absorber layer. A significant enhancement of the solar cell performance can be obtained by selecting a suitable fullerene derivative. Open-circuit voltages as high as 1.11 volts are obtained leading to a power conversion efficiency of 14.6%.

High voltage vacuum-deposited CH3NH3PbI3-CH3NH3PbI3 tandem solar cells

2018

The recent success of perovskite solar cells is based on two solid pillars: the rapid progress of their power conversion efficiency and their flexibility in terms of optoelectrical properties and processing methods. That versatility makes these devices ideal candidates for multi-junction photovoltaics. We report an optically optimized double junction CH3NH3PbI3–CH3NH3PbI3 tandem solar cell where the matched short-circuit current is maximized while parasitic absorption is minimized. The use of an additive vacuum-deposition protocol allows us to reproduce calculated stack designs, which comprise several charge selective materials that ensure appropriate band alignment and charge recombination…

Azatruxene‐Based, Dumbbell‐Shaped, Donor–π‐Bridge–Donor Hole‐Transporting Materials for Perovskite Solar Cells

2020

Three novel donor-π-bridge-donor (D-π-D) hole-transporting materials (HTMs) featuring triazatruxene electron-donating units bridged by different 3,4-ethylenedioxythiophene (EDOT) π-conjugated linkers have been synthesized, characterized, and implemented in mesoporous perovskite solar cells (PSCs). The optoelectronic properties of the new dumbbell-shaped derivatives (DTTXs) are highly influenced by the chemical structure of the EDOT-based linker. Red-shifted absorption and emission and a stronger donor ability were observed in passing from DTTX-1 to DTTX-2 due to the extended π-conjugation. DTTX-3 featured an intramolecular charge transfer between the external triazatruxene units and the azo…

Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers

2016

Methylammonium lead halide perovskites have emerged as high performance photovoltaic materials. Most of these solar cells are prepared via solution-processing and record efficiencies (>20%) have been obtained employing perovskites with mixed halides and organic cations on (mesoscopic) metal oxides. Here, we demonstrate fully vacuum deposited planar perovskite solar cells by depositing methylammonium lead iodide in between intrinsic and doped organic charge transport molecules. Two configurations, one inverted with respect to the other, p-i-n and n-i-p, are prepared and optimized leading to planar solar cells without hysteresis and very high efficiencies, 16.5% and 20%, respectively. It is t…

Phosphine Oxide Derivative as a Passivating Agent to Enhance the Performance of Perovskite Solar Cells

2021

Defects of metal-halide perovskites detrimentally influence the optoelectronic properties of the thin film and, ultimately, the photovoltaic performance of perovskite solar cells (PSCs). Especially, defect-mediated nonradiative recombination that occurs at the perovskite interface significantly limits the power conversion efficiency (PCE) of PSCs. In this regard, interfacial engineering or surface treatment of perovskites has become a viable strategy for reducing the density of surface defects, thereby improving the PCE of PSCs. Here, an organic molecule, tris(5-((tetrahydro-2H-pyran-2-yl)oxy)pentyl) phosphine oxide (THPPO), is synthesized and introduced as a defect passivation agent in PSC…

Efficient Monolithic Perovskite/Perovskite Tandem Solar Cells

2016

Thin-film solar cells suffer from various types of recombination, of which leakage current usually dominates at lower voltages. Herein, we demonstrate first a three-order reduction of the shunt loss mechanism in planar methylammonium lead iodide perovskite solar cells by replacing the commonly used hole transport layer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with a better hole-selective polyarylamine. As a result, these cells exhibit superior operation under reduced light conditions, which we demonstrate for the extreme case of moonlight irradiance, at which open-circuit voltages of 530 mV can still be obtained. By the shunt removal we also observe the VOC to dro…

Highly Stable and Efficient Light-Emitting Electrochemical Cells Based on Cationic Iridium Complexes Bearing Arylazole Ancillary Ligands.

2017

A series of bis-cyclometalated iridium(III) complexes of general formula [Ir(ppy)2(N∧N)][PF6] (ppy− = 2-phenylpyridinate; N∧N = 2-(1H-imidazol-2-yl)pyridine (1), 2-(2-pyridyl)benzimidazole (2), 1-methyl-2-pyridin-2-yl- 1H-benzimidazole (3), 2-(4′-thiazolyl)benzimidazole (4), 1- methyl-2-(4′-thiazolyl)benzimidazole (5)) is reported, and their use as electroluminescent materials in light-emitting electrochemical cell (LEC) devices is investigated. [2][PF6] and [3][PF6] are orange emitters with intense unstructured emission around 590 nm in acetonitrile solution. [1][PF6], [4][PF6], and [5][PF6] are green weak emitters with structured emission bands peaking around 500 nm. The different photoph…

Quantification of spatial inhomogeneity in perovskite solar cells by hyperspectral luminescence imaging

2016

Vacuum evaporated perovskite solar cells with a power conversion efficiency of 15% have been characterized using hyperspectral luminescence imaging. Hyperspectral luminescence imaging is a novel technique that offers spectrally resolved photoluminescence and electroluminescence maps (spatial resolution is 2 micrometer) on an absolute scale. This allows, using the generalized Planck’s law, the construction of absolute maps of the depth-averaged quasi-Fermi level splitting (Δμ), which determines the maximum achievable open circuit voltage (Voc) of the solar cells. In a similar way, using the generalized reciprocity relations the charge transfer efficiency of the cells can be obtained from the…

CCDC 1490702: Experimental Crystal Structure Determination

2017

Related Article: Diego Rota Martir, Cristina Momblona, Antonio Pertegás, David B. Cordes, Alexandra M. Z. Slawin, Henk J. Bolink, and Eli Zysman-Colman|2016|ACS Applied Materials and Interfaces|8|33907|doi:10.1021/acsami.6b14050

CCDC 1546695: Experimental Crystal Structure Determination

2017

Related Article: Adam F. Henwood, Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Thomas W. Rees, Cristina Momblona, Azin Babaei, Antonio Pertegás, Enrique Ortí, Henk J. Bolink, Etienne Baranoff, Eli Zysman-Colman|2017|J.Mater.Chem.C|5|9638|doi:10.1039/C7TC03110F

CCDC 1490703: Experimental Crystal Structure Determination

2017

Related Article: Diego Rota Martir, Cristina Momblona, Antonio Pertegás, David B. Cordes, Alexandra M. Z. Slawin, Henk J. Bolink, and Eli Zysman-Colman|2016|ACS Applied Materials and Interfaces|8|33907|doi:10.1021/acsami.6b14050

CCDC 1515402: Experimental Crystal Structure Determination

2017

Related Article: Cristina Momblona, Cathrin D. Ertl, Antonio Pertegás, José M. Junquera-Hernández, Maria-Grazia La-Placa, Alessandro Prescimone, Enrique Ortí, Catherine E. Housecroft, Edwin C. Constable, and Henk J. Bolink|2017|J.Am.Chem.Soc.|139|3237|doi:10.1021/jacs.6b13311

CCDC 1490707: Experimental Crystal Structure Determination

2017

Related Article: Diego Rota Martir, Cristina Momblona, Antonio Pertegás, David B. Cordes, Alexandra M. Z. Slawin, Henk J. Bolink, and Eli Zysman-Colman|2016|ACS Applied Materials and Interfaces|8|33907|doi:10.1021/acsami.6b14050

CCDC 1546696: Experimental Crystal Structure Determination

2017

Related Article: Adam F. Henwood, Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Thomas W. Rees, Cristina Momblona, Azin Babaei, Antonio Pertegás, Enrique Ortí, Henk J. Bolink, Etienne Baranoff, Eli Zysman-Colman|2017|J.Mater.Chem.C|5|9638|doi:10.1039/C7TC03110F

CCDC 1053872: Experimental Crystal Structure Determination

2015

Related Article: Nail M. Shavaleev, Guohua Xie, Shinto Varghese, David B. Cordes, Alexandra M. Z. Slawin, Cristina Momblona, Enrique Ortí, Henk J. Bolink, Ifor D. W. Samuel, Eli Zysman-Colman|2015|Inorg.Chem.|54|5907|doi:10.1021/acs.inorgchem.5b00717

CCDC 1053870: Experimental Crystal Structure Determination

2015

Related Article: Nail M. Shavaleev, Guohua Xie, Shinto Varghese, David B. Cordes, Alexandra M. Z. Slawin, Cristina Momblona, Enrique Ortí, Henk J. Bolink, Ifor D. W. Samuel, Eli Zysman-Colman|2015|Inorg.Chem.|54|5907|doi:10.1021/acs.inorgchem.5b00717

Blue-Emitting Cationic Iridium(III) Complexes Featuring Pyridylpyrimidine Cyclometalating Ligands and their Use in Sky-Blue and Blue-Green Light-Emit…

2017

CCDC 1519073: Experimental Crystal Structure Determination

2017

Related Article: Marta Martínez-Alonso, Jesús Cerdá, Cristina Momblona, Antonio Pertegás, José M. Junquera-Hernández, Aránzazu Heras, Ana M. Rodríguez, Gustavo Espino, Henk Bolink, and Enrique Ortí|2017|Inorg.Chem.|56|10298|doi:10.1021/acs.inorgchem.7b01167

CCDC 1490708: Experimental Crystal Structure Determination

2017

Related Article: Diego Rota Martir, Cristina Momblona, Antonio Pertegás, David B. Cordes, Alexandra M. Z. Slawin, Henk J. Bolink, and Eli Zysman-Colman|2016|ACS Applied Materials and Interfaces|8|33907|doi:10.1021/acsami.6b14050

CCDC 1490705: Experimental Crystal Structure Determination

2017

Related Article: Diego Rota Martir, Cristina Momblona, Antonio Pertegás, David B. Cordes, Alexandra M. Z. Slawin, Henk J. Bolink, and Eli Zysman-Colman|2016|ACS Applied Materials and Interfaces|8|33907|doi:10.1021/acsami.6b14050

CCDC 1519074: Experimental Crystal Structure Determination

2017

Related Article: Marta Martínez-Alonso, Jesús Cerdá, Cristina Momblona, Antonio Pertegás, José M. Junquera-Hernández, Aránzazu Heras, Ana M. Rodríguez, Gustavo Espino, Henk Bolink, and Enrique Ortí|2017|Inorg.Chem.|56|10298|doi:10.1021/acs.inorgchem.7b01167

CCDC 1546698: Experimental Crystal Structure Determination

2017

Related Article: Adam F. Henwood, Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Thomas W. Rees, Cristina Momblona, Azin Babaei, Antonio Pertegás, Enrique Ortí, Henk J. Bolink, Etienne Baranoff, Eli Zysman-Colman|2017|J.Mater.Chem.C|5|9638|doi:10.1039/C7TC03110F

CCDC 1490429: Experimental Crystal Structure Determination

2016

Related Article: Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Cristina Momblona, Enrique Ortı́, Ifor D. W. Samuel, Henk J. Bolink, and Eli Zysman-Colman|2016|Inorg.Chem.|55|10361|doi:10.1021/acs.inorgchem.6b01602

CCDC 1515401: Experimental Crystal Structure Determination

2017

Related Article: Cristina Momblona, Cathrin D. Ertl, Antonio Pertegás, José M. Junquera-Hernández, Maria-Grazia La-Placa, Alessandro Prescimone, Enrique Ortí, Catherine E. Housecroft, Edwin C. Constable, and Henk J. Bolink|2017|J.Am.Chem.Soc.|139|3237|doi:10.1021/jacs.6b13311

CCDC 1538393: Experimental Crystal Structure Determination

2017

Related Article: Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Cristina Momblona, Antonio Pertegás, Enrique Ortí, Henk J. Bolink, Eli Zysman-Colman|2017|RSC Advances|7|31833|doi:10.1039/C7RA06347D

CCDC 1538394: Experimental Crystal Structure Determination

2017

Related Article: Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Cristina Momblona, Antonio Pertegás, Enrique Ortí, Henk J. Bolink, Eli Zysman-Colman|2017|RSC Advances|7|31833|doi:10.1039/C7RA06347D

CCDC 1490428: Experimental Crystal Structure Determination

2016

Related Article: Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Cristina Momblona, Enrique Ortı́, Ifor D. W. Samuel, Henk J. Bolink, and Eli Zysman-Colman|2016|Inorg.Chem.|55|10361|doi:10.1021/acs.inorgchem.6b01602

Data underpinning - Chiral Iridium(III) Complexes in Light-Emitting Electrochemical Cells: Exploring The Impact of Stereochemistry on The Photophysic…

2016

CCDC 1546697: Experimental Crystal Structure Determination

2017

Related Article: Adam F. Henwood, Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Thomas W. Rees, Cristina Momblona, Azin Babaei, Antonio Pertegás, Enrique Ortí, Henk J. Bolink, Etienne Baranoff, Eli Zysman-Colman|2017|J.Mater.Chem.C|5|9638|doi:10.1039/C7TC03110F

CCDC 1062206: Experimental Crystal Structure Determination

2017

Related Article: Cristina Momblona, Cathrin D. Ertl, Antonio Pertegás, José M. Junquera-Hernández, Maria-Grazia La-Placa, Alessandro Prescimone, Enrique Ortí, Catherine E. Housecroft, Edwin C. Constable, and Henk J. Bolink|2017|J.Am.Chem.Soc.|139|3237|doi:10.1021/jacs.6b13311

CCDC 1490430: Experimental Crystal Structure Determination

2016

Related Article: Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Cristina Momblona, Enrique Ortı́, Ifor D. W. Samuel, Henk J. Bolink, and Eli Zysman-Colman|2016|Inorg.Chem.|55|10361|doi:10.1021/acs.inorgchem.6b01602

Simple Design to Achieve Red-to-Near-infrared Emissive Cationic Ir(III) Emitters and their use in Light Emitting Electrochemical Cells (dataset)

2017

CCDC 1490706: Experimental Crystal Structure Determination

2017

Related Article: Diego Rota Martir, Cristina Momblona, Antonio Pertegás, David B. Cordes, Alexandra M. Z. Slawin, Henk J. Bolink, and Eli Zysman-Colman|2016|ACS Applied Materials and Interfaces|8|33907|doi:10.1021/acsami.6b14050

CCDC 1490704: Experimental Crystal Structure Determination

2017

Related Article: Diego Rota Martir, Cristina Momblona, Antonio Pertegás, David B. Cordes, Alexandra M. Z. Slawin, Henk J. Bolink, and Eli Zysman-Colman|2016|ACS Applied Materials and Interfaces|8|33907|doi:10.1021/acsami.6b14050

CCDC 1053871: Experimental Crystal Structure Determination

2015

Related Article: Nail M. Shavaleev, Guohua Xie, Shinto Varghese, David B. Cordes, Alexandra M. Z. Slawin, Cristina Momblona, Enrique Ortí, Henk J. Bolink, Ifor D. W. Samuel, Eli Zysman-Colman|2015|Inorg.Chem.|54|5907|doi:10.1021/acs.inorgchem.5b00717

Data underpinning - Synthesis, Properties and Light-Emitting Electrochemical Cell (LEEC) Device Fabrication of Cationic Ir(III) Complexes Bearing Ele…

2016

CCDC 1490431: Experimental Crystal Structure Determination

2016

Related Article: Amlan K. Pal, David B. Cordes, Alexandra M. Z. Slawin, Cristina Momblona, Enrique Ortı́, Ifor D. W. Samuel, Henk J. Bolink, and Eli Zysman-Colman|2016|Inorg.Chem.|55|10361|doi:10.1021/acs.inorgchem.6b01602