Search results for " Bioreactor"
showing 10 items of 149 documents
Bacterial Community Structure of an IFAS-MBRs Wastewater Treatment Plant
2017
TIn this work, the bacterial community putatively involved in BNR events of a UCT-MBMBR pilot plant was elucidated by both culture-dependent and metagenomics DNA analyses. The presence of bacterial isolates belonging to Bacillus (in the anoxic compartment) and to Acinetobacter, Stenotrophomonas, Rhodococcus, Escherichia and Aeromonas (in the aerobic compartment) is in agreement with the nitrification/denitrification processes observed in the plant. Moreover, the study of bacterial community structure by NGS revealed a microbial diversity suggesting a biochemical complexity which can be further explored and exploited to improve UCT-MBMBR plant performance.
Effect of biomass features on oxygen transfer in conventional activated sludge and membrane bioreactor systems
2019
Abstract The aim of the present study was to compare the oxygen transfer efficiency in a conventional activated sludge and a membrane bioreactor system. The oxygen transfer was evaluated by means of the oxygen transfer coefficient and α-factor calculation, under different total suspended solids concentration, extracellular polymeric substances, sludge apparent viscosity and size of the flocs. The oxygen transfer coefficient and α-factor showed an exponential decreasing trend with total suspended solid, with a stronger oxygen transfer coefficient dependence in the conventional activated sludge compared to the membrane bioreactor. It was noted that the oxygen transfer coefficient in the conve…
Minimizing membrane bioreactor environmental footprint by multiple objective optimization.
2020
This paper presents a modelling study aimed at minimizing the environmental foot print of a membrane bioreactor (MBR) for wastewater treatment. Specifically, an integrated model for MBR was employed in view of the management optimization of an MBR biological nutrient removal (BNR) pilot plant in terms of operational costs and direct greenhouse gases emissions. The influence of the operational parameters (OPs) on performance indicators (PIs) was investigated by adopting the Extended-FAST sensitivity analysis method. Further, a multi-objective analysis was performed by applying the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The results show-up that the sludge …
New applications in integrated fixed film activated sludge-membrane bioreactor (IFAS-MBR) systems
2020
Abstract This chapter provides an overview on the development and application of integrated fixed film activated sludge-membrane bioreactor (IFAS-MBR) systems. IFAS-MBRs represent a novel configuration for advanced wastewater treatment, and only a few studies are available in literature. With this aim, the results of some studies on IFAS-MBR systems already published are discussed and compared in this chapter. Literature shows that the influent carbon to nitrogen ratio (C/N) strongly affects the biological process in IFAS-MBR. The organic matter removal efficiency (removed biologically) decreases from 60% to 23.5% with the decrease of influent C/N from 10 to 2 mgCOD mgTN− 1. Nitrogen remova…
Resource recovery from sulphate-rich sewage through an innovative anaerobic-based water resource recovery facility (WRRF)
2018
[EN] This research work proposes an innovative water resource recovery facility (WRRF) for the recovery of energy, nutrients and reclaimed water from sewage, which represents a promising approach towards enhanced circular economy scenarios. To this aim, anaerobic technology, microalgae cultivation, and membrane technology were combined in a dedicated platform. The proposed platform produces a high-quality solid- and coliform-free effluent that can be directly discharged to receiving water bodies identified as sensitive areas. Specifically, the content of organic matter, nitrogen and phosphorus in the effluent was 45 mg COD.L-1 , 14.9 mg N.L-1 and 0.5 mg P.L-1 , respectively. Harvested solar…
Mathematical modelling of greenhouse gas emissions from membrane bioreactors: A comprehensive comparison of two mathematical models.
2018
Abstract This paper compares two mathematical models (Model I and Model II) to predict greenhouse gases emission from a University Cape Town (UCT) – membrane bioreactor (MBR) plant. Model I considers N 2 O production only during denitrification. Model II takes into account the ammonia-oxidizing bacteria (AOB) formation pathways for N 2 O. Both models were calibrated adopting real data. Model comparison was performed in terms of (i) sensitivity analysis (ii) best fit and (iii) model prediction uncertainty. On average 6% of factors of Model I and 9% of Model II resulted to be important. In terms of best fit, Model II had a better capability of reproducing the measured data. The average effici…
The effect of the solids and hydraulic retention time on moving bed membrane bioreactor performance
2018
Abstract The aim of the present paper was to investigate the effect of solids (SRT) and hydraulic (HRT) retention time on Integrated Fixed Film Activated Sludge (IFAS) University of Cape Town (UCT) membrane Bioreactor (MBR). In particular, three different pairs of SRT and HRT values were analysed, namely, Phase I 56 d/30 h, Phase II 31 d/15 h and Phase III 7 d/13 h. The short-term effect of these three SRT/HRT conditions was assessed by analysing several system performance indicators: organic carbon and biological nutrient (nitrogen and phosphorus) removal, biomass respiratory activity, activated sludge filtration properties and membrane fouling. The results showed that the decrease of SRT/…
Moving bed membrane bioreactors for carbon and nutrient removal: The effect of C/N variation
2017
In this paper, an experimental campaign was carried out on a University of Cape Town Integrated Fixed Film Activated Sludge Membrane Bioreactor (UCT-IFAS-MBR) pilot plant. The aim of the study was to evaluate the effect of the influent C/N ratio on the system performance in terms of organic carbon, nitrogen and phosphorus removal, biomass viability (through respirometry), activated sludge features and membrane filtration properties. The experiments were organized into three phases, characterized by a variation of the C/N ratio (namely, Phase I: C/N= 5, Phase II: C/N =10; Phase III: C/N = 2). The results highlighted that the system performance was significantly affected by C/N ratio. The rem…
Mass transfer and hydrodynamic characteristics of unbaffled stirred bio-reactors: Influence of impeller design
2014
Abstract Unbaffled stirred tanks are increasingly recognized as a viable alternative to common baffled tanks for a range of processes where the presence of baffles is undesirable for some reason. For instance, in the case of shear sensitive cell cultivation (e.g. human cells), unbaffled tanks have been recently found to be able to provide sufficient mass transfer through the free surface vortex. As a consequence the need for bubble formation and subsequent bursting, along with relevant cells damage, is conveniently avoided. In this work the influence of impeller geometry on mass transfer performance and power demand of an unbaffled stirred vessel operating both in sub-critical conditions (t…
Preliminary evaluation of biopolymers production by mixed microbial culture from citrus wastewater in a MBR system using respirometric techniques
2021
Abstract This preliminary study was aimed at evaluating the feasibility to produce biopolymers (BP) from citrus wastewater by mixed microbial culture in an anaerobic/aerobic membrane bioreactor (A/O-MBR). The activated sludge of the A/O-MBR was successfully enriched in microorganisms having a good capacity in producing intracellular biopolymers. The production of BP was found to be about 0.55 mgCOD mgCOD−1 using pure acetate at a concentration of 1000 mgCOD L−1. When using fermented wastewater, the conversion of acetate into BP product was 0.56 mgCOD mgCOD−1 in the test performed with C/N equal to 1000:1, whereas it was only 0.12 mgCOD mgCOD−1 in the test with C/N of 100:5. The results achi…