Search results for " COMPOSITES"
showing 10 items of 1620 documents
Oxygen stoichiometry control of nanometric oxide compounds: The case of titanium ferrites
2011
Three techniques have been coupled with an original device, based on H{sub 2}/H{sub 2}O equilibrium, controlling oxygen partial pressure: XRD, TGA and DC conductivity in order to characterize very reactive compounds such as nanometric powders. From XRD, both the structure and the oxygen stoichiometry (thanks to their lattice parameter) were investigated in situ. From TGA, it was the oxygen stoichiometry (thanks to mass gain or loss) which was determined. From DC conductivity, it was both the structure and the oxygen stoichiometry (thanks to the activation energy) which were obtained. The advantages were to determine very rapidly and with a small amount of powder the equilibrium conditions (…
(La0.8Sr0.2)(Mn1−yFey)O3±δ oxides for ITSOFC cathode materials?
2005
The oxygen transport properties in (La 0.8 Sr 0.2 )(Mn 1-y Fe y )O 3±δ (LSMF) with various iron contents y = 0, 0.2, 0.5, 0.8 and 1 were determined by the IEDP technique. Both oxygen diffusion and surface exchange coefficients were found to be greater for y = 0.8 and 1 than those of LSM (y=0). Moreover, for y ≤0.5, grain boundary diffusion was the rate limiting step especially at lower temperatures. Thus, in the LSMF perovskite materials, the oxygen diffusion via oxygen vacancies is enhanced by Fe. The LSMF electrical performances were measured by impedance spectroscopy. Compared to LSM and LSF (y= 1), porous LSMF cathodes with y= 0.2-0.8 exhibit poor electronic conductivity: Fe, by reducin…
Low-K factor of SiO2 layer on Si irradiated by YAG:Nd laser
2007
Abstract The change of optical and electrical properties of SiO2 layer on Si single crystal exposed to YAG:Nd laser radiation has been found experimentally. The second harmonic of YAG:Nd laser was used as a source of light. Before irradiation the SiO2 layer with thickness 0.75 μm had red color in reflecting light due to the interference. After irradiation with the laser with intensity of more than 3.5 MW/cm2 red color changed to yellow. However, samples with thickness 0.21 μm did not change color after irradiation. We explain such peculiarities of optical properties by change of optical path. Capacity (C) measurements of SiO2 layer with thickness 0.21 μm by the method of capacity–voltage ch…
Structural and electrical properties of cerium tungstate: Application to methane conversion
2020
International audience; The catalytic efficiency as well as the electrical conduction mechanism of Ce2(WO4)3 powders synthetized for the oxidation of methane were investigated. Total and partial oxidation reactions were observed in the temperature range between 600 and 750 °C under CH4/dry air flux, for low CH4 concentrations. The electrical conduction mechanism is based on electron tunneling at low temperature (< 650 °C) and hopping over an ion barrier at high temperature, which favors the catalytic oxidation of CH4 in air; these mechanisms occur during the partial and total oxidation under weak gas flow. The occurrence of these types of conduction mechanism was related both to the distort…
Mechanism of crystallization of Co-cordierites from stoichiometric powdered glasses
2002
Abstract The influence of cobalt, as a divalent cation, on the crystallization behaviour of the cordierite based glasses was studied. Powdered glass specimens of stoichiometric composition 2MO 2Al 2 O 3 5SiO 2 (M=Co and/or Mg) were obtained and thermally treated at several temperatures and times, and the sequence of crystallization and their microstructural evolution were analysed by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). Results on the crystallization sequence showed that the steps in the crystallization path are independent of the nature of the divalent cation. The first crystalline phase detected displayed the μ-cordierite structure, i.e. a solid…
Outgrowth endothelial cells isolated and expanded from human peripheral blood progenitor cells as a potential source of autologous cells for endothel…
2006
One challenge of particular importance in tissue engineering is to improve vascularization of larger size defects, which would then facilitate a sufficient supply with oxygen and nutrients to the central regions of a larger tissue-engineered construct or in highly vascularized tissues. In this study, we show that outgrowth endothelial cells (OECs) derived from human peripheral blood can serve as a source of human autologous endothelial cells and can be used in combination with fibroin silk fiber meshes for applications in tissue engineering. OEC reveal a highly differentiated endothelial phenotype as well as a high phenotypic stability during their expansion. Furthermore, OEC showed very pr…
Tissue-like self-assembly in cocultures of endothelial cells and osteoblasts and the formation of microcapillary-like structures on three-dimensional…
2007
The survival and functioning of a bone biomaterial requires a rapid and stable vascularization after implantation. However, the mechanisms involved in the context of the complex healing microenvironment are poorly understood. To evaluate the vascularization potential of bone biomaterials, angiogenic stimuli were added to human dermal microvascular endothelial cells (HDMEC) growing on three-dimensional (3-D) bone biomaterials consisting of porous hydroxyapatite, porous calcium phosphate, porous nickel-titanium, successfully being used in humans, and also silk fibroin nets. HDMEC did not migrate to form microcapillary-like structures as they did on cell culture plastic. In cocultures of HDMEC…
Endothelialization of a non-woven silk fibroin net for use in tissue engineering: growth and gene regulation of human endothelial cells
2004
Abstract We have previously shown that a biomaterial consisting of a non-woven fibroin net produced from silk (Bombyx mori) cocoons is an excellent scaffolding material for a wide variety of human cells of different tissue types. Endothelialization must take place for a biomaterial to be successful after implantation. Therefore, primary human endothelial cells and the human endothelial cell lines, HPMEC-ST1.6R and ISO-HAS-1, were examined for adherence and growth patterns on the fibroin nets by confocal laser scanning microscopy after vital staining of the cells and by electron microscopy. Endothelial cells adhered and spread along individual fibers of the nets and did not fill the gaps bet…
Fibronectin-mediated endothelialisation of chitosan porous matrices.
2009
Chitosan (Ch) porous matrices were investigated regarding their ability to be colonized by human microvascular endothelial cells (HPMEC-ST1.6R cell line) and macrovascular endothelial cells namely HUVECs. Specifically we assessed if previous incubation of Ch in a fibronectin (FN) solution was effective in promoting endothelial cell (EC) adhesion to Ch matrices with different degrees of acetylation (DAs). Upon FN physiadsorption, marked differences were found between the two DAs investigated, namely DA 4% and 15%. While cell adhesion was impaired on Ch with DA 15%, ECs were able to not only adhere to Ch with DA 4%, but also to spread and colonize the scaffolds, with retention of the EC pheno…
Vascularization and gene regulation of human endothelial cells growing on porous polyethersulfone (PES) hollow fiber membranes.
2004
Abstract Open-cell hollow fibers made of polyethersulfone (PES) manufactured in the absence of solvents with pore diameters smaller than 100 μm were examined for vascularization by human endothelial cells. The goal of this study was to determine whether the 3-D porous character of the PES surface affected human endothelial cell morphology and functions. Freshly isolated human endothelial cells from the skin (HDMEC), from the lung (HPMEC) and from umbilical cords (HUVEC) and two human endothelial cell lines, HPMEC-ST1.6R and ISO-HAS.c1 were added to PES fibers and cell adherence and growth was followed by confocal laser scanning microscopy. Prior coating of PES with gelatin or fibronectin wa…