Search results for " Chemical Engineering"
showing 10 items of 2965 documents
Photocatalytic conversion of glucose in aqueous suspensions of heteropolyacid-TiO2 composites.
2015
Commercial and home prepared TiO2 samples were functionalized with a commercial Keggin heteropolyacid (HPA) H 3PW12O 40 (PW12) or with a hydrothermally home prepared K 7PW11O 39 salt (PW11). All the materials were characterized by specific surface area measurements (BET), XRD analyses, Raman, DRS along with SEM observations and they have been used for glucose photocatalytic conversion in an aqueous suspension. Different reaction extents and distribution of intermediate oxidation products were observed depending on the photocatalyst. Gluconic acid, arabinose, erythrose and formic acid were observed as oxidation products when bare TiO2 or HPA/TiO2 composite materials were used. Glucose isomer…
Ionic partition diagram of tetraphenylporphyrin at the water|1,2-dichloroethane interface
2011
diagram of 5,10,15,20-tetraphenyl-21H,23H-porphine (H2TPP) at the water|1,2-dichloroethane interface using a simple Born solvation model. This zone diagram shows under which form this porphyrin is present, i.e. neutral, monoprotonated or diprotonated, and in which phase i.e. either in the aqueous or the organic phase as a function of the aqueous pH and the interface polarisation that can be controlled externally or by the distribution of supporting electrolytes. This diagram explains why the monoprotonated form has been difficult to observe when doing biphasic pH titrations
Palladium(II) Complexes of Aminopolycarboxylic Ligands in Aqueous Solution
2011
Thebindingcapacityof fiveaminopolycarboxylicligands(APCs)(nitrilotriacetate(NTA),ethylenediamine-N,N,N 0 , N 0 -tetraacetate (EDTA), (S,S)-ethylenediamine-N,N 0 -disuccinic acid (S,S-EDDS), diethylenetriamine-N,N,N 0 ,N 00 ,N 00 -pentaacetate (DTPA), and triethylenetetraamine-N,N,N 0 ,N 00 ,N 000 ,N 000 -hexaacetate (TTHA)) toward the palladium(II) ion was studied by potentiometric titrations (ISE-H + electrode) in NaNO3 and in NaClO4/NaI (at different molar ratios) solutions and by spectrophotometric titrations (only in NaClO4), at I = 0.1 mol 3 kg � 1 and at T = 298.15 K. The high stability of Pd 2+ -complexones species inhibits the formation of sparingly soluble hydroxo species until pH …
Apparent molar volumes of lithium nitrate in 1-propanol + water in the temperature range from 288.15 to 318.15 K
2002
Abstract Densities of 1-propanol+water+lithium chloride mixtures have been measured with an oscillating-tube densimeter over a large range of concentrations of the salt and 1-propanol at 288.15, 298.15, 308.15, and 318.15 K. From these densities, apparent molar volumes of lithium chloride in 1-propanol+water mixtures have been calculated for each temperature, and apparent molar volumes at infinite dilution have been evaluated. An empirical correlation for partial molar volumes of lithium chloride in 1-propanol+water mixtures with solvent composition and temperature has been derived.
GROWTH AND PHOTOELECTROCHEMICAL BEHAVIOUR OF ELECTRODEPOSITED ZnO THIN FILMS FOR SOLAR CELLS
2012
Thin zinc oxide films were deposited potentiostatically from zinc nitrate aqueous solutions on ITO substrates. The influence of experimental parameters (temperature, electrolyte concentration, deposition potential) on structure and morphology of films was investigated. Deposited films were generally polycrystalline in structure, even if growth according to preferential planes occurs in certain conditions. The effect of thermal treatments in air at 150 and 350 °C was also studied. In some cases, Cl species were incorporated into deposit by adding zinc chloride to the electrolyte. A photoelectrochemical investigation, performed in neutral solution before and after thermal treatment, gives mor…
Electrochemical reduction of graphene oxide films in aqueous and organic solutions
2013
Abstract Electrochemical reduction of graphene oxide (GO) films cast on tin oxide glass substrates were carried out in aqueous solutions and in propylene carbonate and acetonitrile. Cyclic voltammetric measurements indicate successful reduction of GO films. The reduction process begins in aqueous solutions at less negative potentials than in organic solutions. Additionally the pH value of the aqueous solutions influences the reduction potential. According to spectroscopic analysis the reduction process of the GO film can be controlled by the choice of reduction potential and electrolyte medium. The potential window in this work was made broader by increasing pH or by using organic electroly…
Polyfunctional Tetraaza-Macrocyclic Ligands: Zn(II), Cu(II) Binding and Formation of Hybrid Materials with Multiwalled Carbon Nanotubes
2017
The binding properties of HL1, HL2, and HL3 ligands toward Cu(II) and Zn(II) ions, constituted by tetraaza-macrocyclic rings decorated with pyrimidine pendants, were investigated by means of potentiometric and UV spectrophotometric measurements in aqueous solution, with the objective of using the related HL-M(II) (HL = HL1–HL3; M = Cu, Zn) complexes for the preparation of hybrid MWCNT-HL-M(II) materials based on multiwalled carbon nanotubes (MWCNTs), through an environmentally friendly noncovalent procedure. As shown by the crystal structure of [Cu(HL1)](ClO4)2, metal coordination takes place in the macrocyclic ring, whereas the pyrimidine residue remains available for attachment onto the s…
Characterization and Quantitation of Carbon Black Nanomaterials in Polymeric and Biological Aqueous Dispersants by Asymmetrical Flow Field Flow Fract…
2021
Characterization of carbon black (CB) nanomaterials is required in industrial and research areas. Hence, in this study, asymmetrical flow field flow fractionation coupled to UV–vis and DLS detectors in series (AF4-UV–vis-DLS) was studied to evaluate the CB dispersion behavior in polymeric and biological dispersants, given the relevance of these media in practical applications. Under the experimental conditions, the results indicated that polymeric and biological dispersions showed size distributions with hydrodynamic diameters of 404 and 175 nm, respectively, for a particle core diameter of 40 nm. The polymeric dispersant provided lower stability as a function of time than that achieved by …
Electrochemical conversion of pressurized CO2 at simple silver-based cathodes in undivided cells: study of the effect of pressure and other operative…
2020
Abstract Electrochemical reduction of pressurized CO2 is proposed as an interesting approach to overcome the main hurdle of the CO2 electrochemical conversion in aqueous solution, its low solubility (ca. 0.033 M), and to achieve good faradaic efficiency in CO using simple sheet silver cathodes and undivided cells, thus lowering the overall costs of the process. The effect on the process of CO2 pressure (1–30 bar), current density, nature of the supporting electrolyte and other operative conditions, such as the surface of the cathode or the mixing rate, was studied to enhance the production of CO. It was shown that pressurized conditions allow to improve drastically the current efficiency o…
Effect of temperature on the growth of alfa-PbO2 nanostructures
2010
Abstract Ordered arrays of α-PbO 2 nanostructures were grown by galvanostatic anodic deposition into the channels of alumina templates. Electrodepositions were performed in an aqueous solution containing lead acetate and sodium acetate at pH 5.4. Bath temperature and electrodeposition time were varied to check their effect on the growth of nanostructures. It has been found that filling of alumina pores is independent of the time and electrodeposition temperature, whilst height and growth kinetics of nanostructures vary with both parameters. Temperature greatly influences morphology: wires grown at room temperature consisted of clusters of particles, leading to poorly compact structures, whi…