Search results for " Coating."
showing 10 items of 2558 documents
Energy modelling studies of enhanced glazing.
2009
The research on new “energy materials” is a very interesting field of study in the direction of energy saving control in the building construction sector. Lots of studies have been carrying on to develop new enhanced glazing, new synthesis and analysing procedures but simulating their real behaviour is often very difficult and expensive. The easiest way to test the energy performance of new enhanced glazing, in this work doped vanadium (IV) dioxide thermochromic glazing, is to simulate the way they would respond if they were installed in a building. The software used to perform such simulations is Energy Plus™ which is an energy analysis and thermal load simulation program. The aim of this …
VAKUUMWAAGEN Teil 1: Einleitung und Makrowaagen
1997
Waagen, bei denen sich das zu wagende Gut im Vakuum befindet, werden als Vakuumwaagen bezeichnet. Makrowaagen sind fur Lasten von mehr als 100 g ausgelegt. Zum Vergleich von Masseprototypen ohne Auftrieb wurden Vakuum-Komparatorwaagen entwickelt. Grose Vakuumwaagen werden zur Molekulargewichtsbestimmung und zur Messung der Gasdichte verwendet. Fur chemische Untersuchungen unter reduziertem Gasdruck und zur thermogravimetrischen Analyse werden Vakuum-Analysenwaagen mit elektrischer Meswerterfassung eingesetzt. Zur Steuerung von Produktionsprozessen in kontrollierter Atmosphare dienen Wagezellen unterschiedlicher Bauart. Balances destined for weighing of goods in vacuum are labeled as vacuum …
Comparison of Permeation Measurements and Hybrid Density Functional Calculations on Oxygen Vacancy Transport in Complex Perovskite Oxides
2014
The oxygen vacancy (VO••) formation enthalpy (ΔHF) was determined from the effective activation energies obtained in the permeation measurements on a series of solid solutions La0.98–xSrxCo0.2Fe0.8O3−δ (x = 0.125–0.8) and compared with the results of ab initio calculations at finite temperatures based on the hybrid (PBE0) and GGA+U calculations, as well as previous thermogravimetric experiments. The Mulliken atomic charges, magnetic moments, and the Fe-VO•• and Sr-VO•• distances are analyzed. The strong dependence of formation enthalpy of VO•• on the Fe oxidation state due to variation in Sr and VO•• concentrations is discussed.
Simulation of abrasion–corrosion at high temperatures by in situ pulsed laser spallation of oxide films
1999
Abstract A pulsed Nd:YAG laser combined with a thermogravimetric cell has been used to spall in situ the oxide films grown on a Fe–2.25Cr–1Mo steel at high temperature in oxidizing media. This technique allows to define the oxidation rate of bare metal surfaces, which can be used to simulate the corrosion-dominated regime during slurry–erosion tests.
Synthesis and Characterization of Palladium Nanoparticle/Polypyrrole Composites
2008
In this work, a simple non-template one-step method for the synthesis of 2.0−2.5 nm palladium nanoparticles encapsulated into a polypyrrole shell via direct redox reaction between palladium(II) acetate and pyrrole in acetonitrile medium is described. Palladium nanoparticles are found to be able to self-organize into spherical Pd/PPy composites. The size of the Pd/PPy composite particles and Pd content in the composite depend strongly on the concentration of the palladium salt component. The combination of elemental CHNS and thermogravimetric (TGA) analysis was used to determine a high (∼40 wt %) content of palladium, which is in a good agreement with EDX data. The process of Pd/PPy composit…
Improving the high temperature oxidation resistance of pure titanium by shot-peening treatments
2017
International audience; Shot-peening (SP) treatments have shown their capacity to improve the oxidation resistance of titanium and zirconium thanks to the large compressive stresses and the surface hardening induced by this mechanical process. However, shot-peening treatments can produce a surface chemical deposit, which can modify the high temperature oxidation resistance. Here, we study pure titanium samples shot-peened with different type of balls: tungsten carbide, alumina or glass. The oxidation behavior was studied at 700 °C in dry air by thermo gravimetric analysis for short isotherm oxidation periods up to 100 h. Also, long oxidation tests (3000 h) at 700 °C were performed with an i…
Sepiolite-reinforced epoxy nanocomposites: Thermal, mechanical, and morphological behavior
2010
A bisphenol A-based epoxy resin was modified with pristine sepiolite and an organically surface-modified sepiolite and thermally cured using two different curing agents: an aliphatic and a cycloaromatic diamine. The nanocomposites were characterized by dynamic mechanical analysis (DMA), rheology, thermogravimetric analysis (TGA), and electron microscopy. The initial sepiolite–epoxy mixtures show a better dispersion for the sepiolite-modified system that forms a percolation network structure. Mechanical properties have also been determined. The flexural modulus of the epoxy matrix slightly increases by the incorporation of the organophilic sepiolite. The flexural strength of the sepiolite-mo…
Water Absorption of Hemp Fibre Nonwovens Modified with Metal and Metal Oxide Nanoparticles
2015
In this paper changes of ability of hemp fibre nonwovens to absorb water after deposition of metal and metal oxide nanoparticles were investigated. Moisture content of samples after storage in different climatic conditions was determined using thermogravimetric method. The obtained results were compared with the results of previous research based on investigation of water absorption of metalized woven fabric of bast fibre. Analysis of measurements showed that nonwoven samples with surface treated in plasma attract water slightly better than sample with untreated surface; this was more pronounced in woven fabric samples. In turn, metal coatings reduced water sorption. Unlike woven fabric sam…
Effect of halloysite nanotubes filler on polydopamine properties
2019
Abstract Hypothesis Polydopamine (PDA) is widely used as hydrophilic coating for several applications. However, most of the methods studied to improve or manipulate PDA properties are multistep and time-consuming, and there is a need for versatile strategies aimed at controlling and modifying the properties of PDA. Experiments PDA-halloysite nanocomposites were produced under different oxidation conditions in alkaline and acidic media and were characterized by UV–visible and attenuated total refraction- Fourier Transform Infrared spectroscopies, thermogravimetric analysis, porosimetry, scanning electron microscopy, X-ray diffraction and contact angle measurements against the reference PDA p…
Nitrogen plasma pressure influence on the composition of TiNxOy sputtered films
2002
Thin films of TiNxOy were deposited by d.c. magnetron sputtering on glass substrates using an (Ar+,N2) plasma and Ti target. The N2 partial pressure was changed from 2.3 × 10−4 mbar to 4.6 × 10−3 mbar in order to obtain films with increasing nitrogen contents. X-ray photoelectron spectroscopy was used to determine the as-deposited composition. The presence of oxygen, which is probably due to contamination from the residual atmosphere in the vacuum chamber, is always detected, both in the surface layers and in the bulk of the films, confirming the formation of TiNxOy. When the nitrogen partial pressure was increased, a maximum for the nitrogen content in the films was reached, corresponding …