Search results for " Coating."
showing 10 items of 2558 documents
Master curves of viscoelastic behavior in the plastic region of a solid polymer
1977
Stress relaxation and creep tests following strain ramps were made on Mylar, both above and below the yield stress. The ramp velocity was varied over a 40-fold range. All data exhibit nonlinear viscoelastic behavior. However, those obtained above the yield point, i.e., in the plastic region, could be reduced to single master curves for both the creep and the relaxation tests by means of a simple time shift factor. This factor is inversely proportional to the strain rate existing just prior to the test.
Rheological behavior and thermal stability of poly(phenylene sulfide)/vectra-B950 blends
1994
Blends of polyphenylene sulfide (PPS) with a commercial, wholly aromatic, liquid crystalline polymer (LCP), Vectra-B950, have been prepared by melt-blending. Their rheological behavior has been studied in order to determine if the LCP displays a processing aid ability, and under what conditions it gives rise to potentially reinforcing fibrils dispersed in the PPS matrix. The problem of the thermal stability of PPS/LCP blends, which has been considered by some authors as the main obstacle to the production of usable materials due to the evolution of gaseous substances during processing, has been discussed. © 1994 John Wiley & Sons, Inc.
Processing and characterization of blends of fluoroelastomers with semirigid liquid crystal polymers
1996
Fluoroelastomers (FEs) usually have working temperatures above 150°C and a great resistance to aggressive agents such as oils, fuels, aliphatic and aromatic solvents, steam, moderate acid, and basic environments. Liquid crystal polymers (LCPs) can be effective processing aids and reinforcing agents for elastomers. These characteristics are very attractive to lower melt viscosity and to stiffen and strengthen the final product through a simple blending. Among the LCPs, the semirigid LCPs seem the most appealing for blending with flexible thermoplastics (FTs) because their processing temperatures can be arranged to be in the same processing temperature range of FTs and because the presence of…
Superhydrophobic TiO2/Fluorinated Polysiloxane Hybrid Coatings with Controlled Morphology for Solar Photocatalysis
2021
Abstract Technological applications of polysiloxane coatings have been influenced by their intrinsic low surface energy, which increases their water repellence. Accurate control of composition and interfacial properties through the introduction of perfluorinated moieties further lowers the polysiloxane surface energy, while mixing with metal oxide nanoparticles enhances roughness, resulting in a great potential in the development of superhydrophobic materials for photocatalysis. Herein, a series of hydrophobic and superhydrophobic hybrid coatings were prepared by dehydrocoupling and hydrosilylation reactions of polymethylhydrosiloxane with 1H,1H,2H,2H‐perfluorooctyltriethoxysilane and 1,3-d…
Mixed polymeric monolayers and Langmuir-Blodgett multilayers with functional low molecular weight guest compounds
2008
Abstract Mixed monolayers and Langmuir-Blodgett multilayers of functional low molecular weight guest compounds, especially nonlinear optical (NLO) dyes, within the matrix of an amphotropic spacer polymer have been prepared. The polymer matrix enabled the transfer of guest compounds not capable of self-organizing at the air-water interface by themselves. The structure of the LB multilayers and the transfer process were studied by small angle X-ray scattering and UV-visible spectroscopy. Good NLO coefficients were found in the mixed films.
Supramolecular isomerism in spin crossover networks with aurophilic interactions
2004
Assembly of FeII, 3-cyanopyridine and [Au(CN)2]– affords, in one-pot reaction, three coordination polymers that represent a genuine example of supramolecular isomerism with strong influence in the spin crossover regime of the FeII ions. Real Cabezos, Jose Antonio, Jose.A.Real@uv.es
Coil-Globule Collapse of Polystyrene Chains in Tetrahydrofuran-Water Mixtures.
2018
We study the coil and globule states of a single polymer chain in solution by performing molecular dynamics simulations with a united atom model. Specifically, we characterize the structural properties of atactic polystyrene chains with N = 20–150 monomers in tetrahydrofuran–water mixtures at varying mixing ratios. We find that the hydrophobic polymers form rather open coils when the mole fraction of water, XW, is roughly below 0.25, whereas the chains collapse into globules when XW ≳ 0.75. We confirm the theoretically expected scaling laws for the radius of gyration, Rg, in these regimes, i.e., Rg ∝ N3/5 and Rg ∝ N1/3 for good and poor solvent conditions, respectively. For poor solvent con…
Electrospun rubber/thermoplastic hybrid nanofibers for localized toughening effects in epoxy resins
2020
Synthetic rubber/thermoplastic blends were electrospun from their solutions. The rubber was a solid acrylonitrile/butadiene/acrylic acid copolymer and the thermoplastic was polyacrylonitrile. The aims of this study were to identify suitable systems and processing conditions for obtaining rubber-based electrospun nanofibers, to investigate the ability of an epoxy resin system to impregnate and swell selected hybrid rubber/thermoplastic mats, and to assess the impact of the nanofibers on the resin morphology and curing behavior. In particular, electrospinning trials were carried out varying the composition of the feed solution and process parameters, such as the applied voltage, the flow rate…
Functional 3D Photonic Films from Polymer Beads
2007
This paper describes synthesis and properties of polymer opals with a special emphasis on functional opals. Polymer opals are formed from monodisperse polymer colloids by self-assembly. Their potential applications range from coloring pigments, 3D bicontinuous supports for catalysis to photonic materials. This latter application requires especially the controlled creation of defects and the incorporation of fluorescent materials. (© 2007 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
Efficient photovoltaic and electroluminescent perovskite devices.
2015
Planar diode structures employing hybrid organic–inorganic methylammonium lead iodide perovskites lead to multifunctional devices exhibiting both a high photovoltaic efficiency and good electroluminescence. The electroluminescence strongly improves at higher current density applied using a pulsed driving method.