Search results for " Conductivity"

Thermal conductivity measurement of insulating innovative building materials by hot plate and heat flow meter devices: A Round Robin Test

2019

Abstract The characterization of thermal insulation properties of construction materials represents a fundamental step on the building insulation assessment. In recent years innovative materials have been introduced in the market to fulfill the continuously growing requirements of energy saving and sustainability, and their performance is not so reliable and mature as it happens for traditional insulators. The work presents a Round Robin Test realised among six European laboratories hosting hot plates devices to measure the thermal conductivity of four different materials: aerogel, vacuum insulation panels, polystyrene and birch wood fibre insulation boards. After the definition of the comm…

Low-Frequency Relaxation Phenomena in α-LiIO3: The Nature and Role of Defects

2002

The lithium iodate ionic conduction in the polar c-axis direction is studied between 35 and 470 K for crystals grown in various conditions. So far, to separate processes induced by the nature of electrodes, the impedance spectroscopy technique had been used at room temperature with both metallic and ideally polarizable insulating electrodes, so that a relaxation of space charges was clearly identified. Here, the temperature dependence of the hopping ionic conductivity exhibits quite different activation energies well related to the growth conditions. Following low-temperature Raman and thermodynamic experiments, a new approach based on a vacancy diffusion mechanism is proposed. Experimental…

Investigation of diffusion and electromigration of hydrogen in palladium and PdAg alloy

1999

Abstract Diffusion and electromigration of hydrogen in PdH 0.1 , Pd 77 Ag 23 H 0.1 and Pd 50 Ag 50 H 0.1 alloy were measured by means of resistivity method. It is known that hydrogen migrates towards the cathode within the temperature range of 300–473 K in the PdH 0.1 and Pd 77 Ag 23 H 0.1 system. In Pd 50 Ag 50 H 0.1 , hydrogen migrates towards the cathode below 400 K, but towards the anode at higher temperatures. Its effective valency increases together with temperature. At the same time it satisfies the linear dependence on inverse specific resistance ρ : Z eff = Z i +( k / ρ ). The constants Z i and k have the following values: (1.05±0.01) and −(3.81±0.04)×10 −8 Ω m for hydrogen in PdH …

Gas–solid chromatographic separation of hydrogen isotopes: a comparison between two palladium bearing materials – alumina and kieselguhr

1998

The separation of hydrogen isotopes (H, D, T) is performed by displacement gas chromatography on palladium. A large isotopic effect is associated with the reversible adsorption of hydrogen by palladium. Two Pd support materials have been compared: alpha-alumina and kieselguhr. The study includes a physicochemical characterization and a set of functional tests. The Van Deemter model gives a fairly good analysis of the process but to get more information, thermoregulated separations are needed. For both supports, palladium is impregnated as small dispersed particles in the 0.1 to 0.3 μm range diameter. For the same palladium loading, alumina is more efficient than kieselguhr.

Variation in somatic cell count, California mastitis test, and electrical conductivity among various fractions of ewe's milk.

1991

Abstract Variation of three estimates of udder inflammation (SCC, California mastitis test, and electrical conductivity) among the foremilk, machine milk, and hand stripping samples were studied. Foremilk and hand stripping milks were taken from each individual teat; machine milk was taken from the entire udder. For this experiment a total of 30 Manchega ewes were subjected to machine milking during the 9th wk of lactation. Samples were taken in duplicate during two milkings on consecutive mornings. Significant differences were observed in the SCC and electrical conductivity, but not in California mastitis test, between foremilk and stripping milk The stripping fraction had higher SCC (70 ±…

Physico-chemical and bacteriological parameters in a hypereutrophic lagoon (Albufera Lake, Valencia, Spain).

1991

Several physico-chemical parameters related to water quality, as well as saprophytic and public health-related heterotrophic bacterial groups were studied in a hypereutrophic lake (Albufera, Valencia) at different seasons. Total microscopic and viable counts were compared, and, together with faecal indicators, were determined in water samples from different sites. Heterotrophic bacteria grown on nonselective medium were identified to genus level and a diversity index was calculated. Pseudomonas-Alcaligenes was the most frequently isolated group from all sampling sites along the study, following by Moraxella, Acinetobacter, Vibrio and Aeromonas. The relationships between all parameters were …

Functionalised poly (vinyl alcohol)/graphene oxide as polymer composite electrolyte membranes

2019

[EN] Crosslinked poly(vinyl alcohol) (PVA) based composite films were prepared as polyelectrolyte membranes for low temperature direct ethanol fuel cells (DEFC). The membranes were functionalised by means of the addition of graphene oxide (GO) and sulfonated graphene oxide (SGO) and crosslinked with sulfosuccinic acid (SSA). The chemical structure was corroborated and suitable thermal properties were found. Although the addition of GO and SGO slightly decreased the proton conductivity of the membranes, a significant reduction of the ethanol solution swelling and crossover was encountered, more relevant for those functionalised with SGO. In general, the composite membranes were stable under …

Physico-chemical properties of dense water/copper(II) bis(2-ethylhexyl) sulfosuccinate/CCl4 microemulsions

2007

Measurements of some physico-chemical properties (density, viscosity, conductance, infra-red spectra) of water/copper(II) bis(2-ethylhexyl) sulfosuccinate (Cu(DEHSS)2)/CCl4 microemulsions, as a function of the volume fraction O of the dispersed phase (0 < O < 0.6) and of the molar ratio R (R = [water]/[DEHSS−]), have been performed at 25 °C. At each value of R, the density of the micellar phase is practically independent of O whereas the viscosity of microemulsions diverges above threshold O values. A divergent behavior for the electrical conductivity has also been observed but only at certain R values. These results, together with those from infra-red spectra, suggest that in percolated mi…

Investigation of Effective Thermal Conductivity Aluminum Foams

2012

Abstract The study on the heat transfer mechanisms through the aluminium foam with a fluid in void cells of that foam was reported in this paper. Based on laboratory experiments, the effective thermal conductivity coefficient values were found for various type aluminum foams which had been filled up with a gas or a liquid. The significant effects were observed from porosity as well as from metal and fluid properties on the heat transfer capacity in a foam-fluid system. The convective heat transfer phenomenon was identified to occur in the foam cellular space. That phenomenon affected the effective thermal conductivity much more for liquid-filled foams than for gas-filled foams.

Influence of soil surface sealing and hydrophobicity on water infiltration

Nella tesi viene affrontato lo studio dell’impatto dei fenomeni di sealing superficiale e di idrofobicità sui processi di infiltrazione dell’acqua nel suolo. A tal fine vengono utilizzati diversi tipi di esperimenti infiltrometrici che consentono di determinare le modificazioni delle proprietà idrauliche del suolo indotte da questi due fenomeni permettendo di valutare così le loro ripercussioni negative sui processi idrologici. The thesis aims at investigating the effects of soil sealing and hydrophobicity on the water infiltration process. Different field infiltrometric techniques are applied at this end due to their ability to characterize modifications of soil hydraulic properties that d…