Search results for " Detectors"
showing 10 items of 2027 documents
A large Streamer Chamber muon tracking detector in a high-flux fixed-target application.
1999
Arrays of limited streamer tubes of the Iarocci type were deployed in our experiment at CERN as part of a forward muon detector system with provisions for the beam to pass through the center of each panel in the array. A total of 16 4 m x 4 m panels were assembled with inductive readout strips on both sides of each panel. An active feedback system. was deployed to regulate the high voltage to the streamer tubes to insure a constant efficiency for minimum ionizing particles. The arrays were operated in this environment for over five years of data taking. Streamer tube track-reconstruction efficiencies and tube replacement rates are reported. (C) 1999 Elsevier Science B.V. All rights reserved.
Optimal filtering algorithm implementation in FPGAs for the ATLAS TileCal Read-Out drivers
2011
TileCal is the hadronic calorimeter of the ATLAS experiment in the LHC (CERN). Its Read-Out Drivers (RODs) process, in real time, the digitized information coming from the front-end electronics and send it to the Read-Out System. Data processing in the ROD boards is performed in Processing Unit Mezzanine Cards that use commercial DSPs to run the Optimal Filtering (OF) algorithms.
Precise energies of gamma rays from the 230Th and 228Th decay
1977
Abstract Energies up to 300 keV of prominent gamma rays from the decay of 230 Th, 228 Th and some of the 228 Th descendants have been precisely measured by use of Ge(Li) detectors.
Fractal zone plates.
2003
Fractal zone plates (FZPs), i.e., zone plates with a fractal structure, are described. The focusing properties of this new type of zone plate are compared with those of conventional Fresnel zone plates. It is shown that the axial irradiance exhibited by the FZP has self-similarity properties that can be correlated to those of the diffracting aperture.
Implementation and Performance of the Signal Reconstruction in the ATLAS Hadronic Tile Calorimeter
2012
AbstractThe Tile Calorimeter (TileCal) for the ATLAS experiment at the CERN Large Hadron Collider (LHC) is currently taking data with proton-proton collisions. The Tile Calorimeter is a sampling calorimeter with steel as absorber and scintillators as active medium. The scintillators are read-out by wavelength shifting fibers coupled to photomultiplier tubes (PMT). The analogue signals from the PMTs are amplified, shaped and digitized by sampling the signal every 25ns. The TileCal front-end electronics allows to read-out the signals produced by about 10000 channels measuring energies ranging from ∼30 MeV to ∼2 TeV. The read-out system is designed to reconstruct the data in real-time fulfilli…
The ATLAS TileCal read-out drivers signal reconstruction
2009
TileCal is the hadronic calorimeter of the ATLAS experiment at the LHC collider at CERN. The Read-Out Drivers (ROD) are the core of the off-detector electronics. The main components of the RODs are the Digital Signal Processor (DSP) placed on the Processing Unit (PU) dautherboards. This paper describes the DSP code and its performance with calibration and real data. The code is divided into two different parts: the first part contains the core functionalities and the second one the reconstruction algorithms. The core acts as an operating system and it controls the configuration, the data reception, transmission, online monitoring and the synchronization between front-end data and the Trigge…
Sensitivity on earth core and mantle densities using atmospheric neutrinos
2009
11 pages, 11 figures.-- ISI article identifier:000267776100008 .-- ArXiv pre-print avaible at: http://arxiv.org/abs/0904.0796
The UA4/2 experiment at the CERN SpS collider
1997
Abstract The UA4/2 experiment performed at CERN to measure the ratio of the real to the imaginary part of the forward elastic scattering amplitude is described. The accent is placed on the improvements with respect to the previous UA4 experiment, especially on the much improved design of the high-β insertion and a high-resolution, highly multiplexed scintillating fiber tracking detector.
A high angular-resolution and time-of-flight detector system for recoil protons from the reactions p(γ, γ)p and p(γ, π0)p
1996
Using the Mainz NaI(Tl)BaF2 photon spectrometer CATS (Compton And Two photon Spectrometer) together with the prototype of a universal spectrometer for recoil protons TRAJAN (TRAjectory ANalyser) we have studied different methods to disentangle Compton scattering by the proton from the large π0 background through the energy range of the Δ resonance. CATS is a modular 48 cm ⊘ × 64 cm NaI(Tl) detector with an energy resolution of 1.5% combined with a 2π array of 61 BaF2 detectors. TRAJAN consists of a hodoscope with two planes, a wire chamber with horizontal and vertical wires and a grid of horizontal and vertical plastic scintillator strips, followed by a wall of nine NaI(Tl) detectors. By t…
A large-area modular electromagnetic shower detector for the CERN intersecting storage rings
1979
The authors describe the design and performances large-area (13 m/sup 2/) shower detector built for an experiment at the CERN ISR to detect electrons and gamma rays with energies up to 4 GeV. The main characteristics of the detector are: a) linearity of the energy response from 0.5 to 4 GeV; b) good energy, time and space resolutions; c) modularity of the mechanical assembly; d) low cost of construction. (3 refs).