Search results for " Extraction"

Ultrasound-assisted green solvent extraction of high-added value compounds from microalgae Nannochloropsis spp.

2015

Abstract The aim of this work was to investigate ultrasound (US)-assisted green solvent extraction of valuable compounds from the microalgae Nannochloropsis spp. Individual green solvents (water, ethanol (EtOH), dimethyl sulfoxide (DMSO)) and binary mixture of solvents (water-DMSO and water-EtOH) were used for the extraction procedures. Maximum total phenolic compounds yield ( Y p  ≈ 0.33) was obtained after US pre-treatment ( W  = 400 W, 15 min), being almost 5-folds higher compared to that found for the untreated samples and aqueous extraction ( Y p  ≈ 0.06). The highest yield of total chlorophylls ( Y c  ≈ 0.043) was obtained after US ( W  = 400 W, 7.5 min), being more than 9-folds highe…

Utilization of long duration high-volume sampling coupled to SPME-GC-MS/MS for the assessment of airborne pesticides variability in an urban area (St…

2016

Atmospheric samples have been collected between 14 March and 12 September 2012 on a 2-week basis (15 days of sampling and exchange of traps each 7 days) in Strasbourg (east of France) for the analysis of 43 pesticides. Samples (particle and gas phases) were separately extracted using Accelerated Solvent Extraction (ASE) and pre-concentrated by Solid Phase Micro-Extraction (SPME) before analysis by gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). Four SPME consecutive injections at distinct temperatures were made in order to increase the sensitivity of detection for the all monitored pesticides. Currently used detected pesticides can be grouped in four classes; those used i…

Determination of pyrethroid pesticide residues in fatty materials by solid-matrix dispersion partition, followed by mini-column size-exclusion chroma…

1999

The method studied uses a combination of a solid-matrix dispersion partition (SMDP) followed by high-performance size-exclusion chromatography on a minicolumn (HPmSEC) of 7.8 mm I.D. for the separation of pyrethroid (PYR) residues from fatty material. The solid-matrix dispersion extraction is carried out by absorbing a fat solution onto an Extrelut-3 cartridge (filled with a macroporous diatomaceous material) and extracting the PYR residues with acetonitrile. Up to 1 g of fatty material can be extracted with 15 ml acetonitrile. The small amount (mean +/- S.D. = 12.4 +/- 5.9 mg) of fatty material which is eluted into the acetonitrile is further removed by HPmSEC. PYR pesticide residues are c…

Multi-residue determination of organic micro-pollutants in river sediment by stir-disc solid phase extraction based on oxidized buckypaper

2020

This paper describes a procedure for the isolation of 20 organic micro-pollutants among pesticides, drugs, recreational drugs, flame retardants from river sediments. After a solid-liquid extraction with a methanol:water (50:50, v/v) solution, the supernatant was diluted with water and cleaned up by stir-disc solid-phase extraction (SPE). The disc was made of buckypaper, a self-supporting entangled assembly of carbon nanotubes, which was used as a highly porous, two-sided, sorbent membrane. In the preliminary activation step, the membrane was oxidised for 2-hours with nitric acid to extend its extraction capability also to more polar compounds. All extracts were analysed by ultra-high-perfor…

Study of liquid–liquid extraction of ethanol + water azeotropic mixtures using two imidazolium-based ionic liquids

2018

Abstract The present work was focused on the study of two imidazolium-based ionic liquids (ILs) as solvents in liquid–liquid extraction of ethanol from aqueous mixtures. With this aim, the experimental liquid–liquid equilibria (LLE) data of water (1) + ethanol (2) + 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([emim][Tf2N]) (3) and water (1) + ethanol (2) + 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([hmim][Tf2N]) (4) systems were obtained at different temperatures: 283.2, 303.2, and 323.2 K, in order to check the influence of temperature. The results were correlated by non-random two-liquid (NRTL) and universal quasichemical (UNIQUAC) models with good c…

Enzymatic water extraction of taxifolin from wood sawdust of Larix gmelini (Rupr.) Rupr. and evaluation of its antioxidant activity

2011

Abstract An enzyme incubation–water extraction (EI–WE) method was developed and optimised for the extraction of the natural antioxidant taxifolin and of the total flavonoids from wood sawdust of Larix gmelini ( Rupr. ) Rupr. A factorial design and a central composite design approach were used for method optimisation. Optimal conditions were 0.5 mg/ml cellulase and 0.5 mg/ml pectinase, a pH of 5.0, a temperature of 32 °C and 18 h incubation time. The flavonoids and taxifolin were extracted in hot water at 50 °C for 30 min, with a solid to liquid ratio of 1:20. Under optimised conditions, the yields of taxifolin and total flavonoids increased from 1.06 ± 0.08 to 1.35 ± 0.04 mg/g and 4.13 ± 0.…

Evaluation by HPLC-UV of Polar Pesticides in Rice Fields

1999

Ultra-high-pressure liquid chromatography tandem mass spectrometry method for the determination of 9 organophosphate flame retardants in water samples

2016

Few methods are available for comprehensive organophosphate flame retardants (PFRs) detection in water and wastewater. Gas chromatography has been employed previously, but this approach is less selective, not amenable for use with deuterated standards and can suffer unfavorable fragmentation. Ultra-high-pressure liquid chromatography tandem mass spectrometry (UHPLC-QqQ-MS/MS) has become the most promising platform, already applied successfully for analysis of selected PFRs in some environmental matrices like water and wastewater. However, the presence of some interferences from the dissolvent, the equipment and the used materials should be taken into account. The procedure involves: The fir…

Flow Injection Fourier Transform Infrared Determination of Caffeine in Soft Drinks

1997

A fully automated procedure has been developed for FT-IR determination of caffeine in soft drinks. Samples are first degasified by filtration and then directly injected into a flow manifold and passed through a 100 mg C18 SPE cartridge, conditioned with methanol and water. After the cartridge has been cleaned with water, the caffeine is eluted with CHCl3 and stabilized with ethanol. The flow injection (FI) recording is obtained by measuring the absorbance at 1658 cm-1 with a baseline established at 1800 cm-1. Area values for the FI recording obtained between 0.4 and 1.4 min after sample injection are interpolated in the calibration graph of a series of aqueous standards of caffeine, which w…

Focused microwave-assisted Soxhlet extraction: An expeditive approach for the isolation of lipids from sausage products

2003

A prototype of extractor based on the conventional Soxhlet principles but assisted in the cartridge zone by focused microwaves is proposed for accelerating the extraction of lipids from sausage products. The extraction process has been optimised using a multivariate design involving the main variables influencing the performance of the prototype (namely, irradiation power P, irradiation time T and number of cycles C). Under the optimum working conditions (P=160 W, T=10 s and C=14), the extraction of lipids from different Spanish sausage products is complete in 45 min. The extracts thus obtained have been compared with those provided by conventional Soxhlet extraction for 8 h by development …