Search results for " Fluid dynamics"
showing 10 items of 246 documents
Computation of travelling wave solutions of scalar conservation laws with a stiff source term
2003
Abstract In this paper we propose a nonoscillatory numerical technique to compute the travelling wave solution of scalar conservation laws with a stiff source term. This procedure is based on the dynamical behavior described by the associated stationary ODE and it reduces/avoids numerical errors usually encountered with these problems, i.e., spurious oscillations and incorrect wave propagation speed. We combine this treatment with either the first order Lax–Friedrichs scheme or the second order Nessyahu–Tadmor scheme. We have tested several model problems by LeVeque and Yee for which the stiffness coefficient can be increased. We have also tested a problem with a nonlinear flux and a discon…
Adaptive mesh refinement techniques for high-order shock capturing schemes for multi-dimensional hydrodynamic simulations
2006
The numerical simulation of physical phenomena represented by non-linear hyperbolic systems of conservation laws presents specific difficulties mainly due to the presence of discontinuities in the solution. State of the art methods for the solution of such equations involve high resolution shock capturing schemes, which are able to produce sharp profiles at the discontinuities and high accuracy in smooth regions, together with some kind of grid adaption, which reduces the computational cost by using finer grids near the discontinuities and coarser grids in smooth regions. The combination of both techniques presents intrinsic numerical and programming difficulties. In this work we present a …
Numerical and Experimental Investigation of Equivalence Ratio (ER) and Feedstock Particle Size on Birchwood Gasification
2017
This paper discusses the characteristics of Birchwood gasification using the simulated results of a Computational Fluid Dynamics (CFD) model. The CFD model is developed and validated with the experimental results obtained with the fixed bed downdraft gasifier available at the University of Agder (UIA), Norway. In this work, several parameters are examined and given importance, such as producer gas yield, syngas composition, lower heating value (LHV), and cold gas efficiency (CGE) of the syngas. The behavior of the parameters mentioned above is examined by varying the biomass particle size. The diameters of the two biomass particles are 11.5 mm and 9.18 mm. All the parameters investigate wit…
Conical Two-Phase Swirl Flow Atomizers—Numerical and Experimental Study
2021
This paper presents the results of numerical simulations for the developed and discussed conical two-phase atomizers with swirl flow, differing in the ratio of the height of the swirl chamber to its diameter. Experiments were carried out for SAN-1 with HS/DS = 1 and SAN-2 with HS/DS = 4 atomizers. The study was conducted over a range of Reynolds number for liquid ReL = (1400
Three-Dimensional Modeling and Geometrical Influence on the Hydraulic Performance of a Control Valve
2007
The ability to understand and manage the performance of hydraulic control valves is important in many automatic and manual industrial processes. The use of computational fluid dynamics (CFD) aids in the design of such valves by inexpensively providing insight into flow patterns, potential noise sources, and cavitation. Applications of CFD to study the performance of complex three-dimensional (3D) valves, such as poppet, spool, and butterfly valves, are becoming more common. Still, validation and accuracy remain an issue. The Reynolds-averaged Navier–Stokes equations were solved numerically using the commercial CFD package FLUENT V6.2 to assess the effect of geometry on the performance of a …
Gravity effects on mixing with magnetic micro-convection in microfluidics.
2018
Mixing remains an important problem for development of successful microfluidic and lab-on-a-chip devices, where simple and predictable systems are particularly interesting. One is magnetic micro-convection, an instability happening on the interface of miscible magnetic and non-magnetic fluids in a Hele-Shaw cell under applied field. Previous work proved that Brinkman model quantitatively explains the experiments. However, a gravity caused convective motion complicated the tests. Here we first improve the experimental system to exclude the gravitational convective motion. Afterwards, we observe and quantify how gravity and laminar flow play an important role in stabilizing the perturbations …
Two-Dimensional Modeling of a Flat-Plate Photocatalytic Reactor for Oxidation of Indoor Air Pollutants
2007
In this paper we present a two-dimensional (2-D) analysis of a narrow-slit, flat-plate, single-pass, flow-through photocatalytic reactor for air purification. The continuity equation for convection and diffusion in two dimensions, under un-steady-state conditions, was coupled with radiation field modeling and photocatalytic reaction kinetics to model the transient and steady-state behavior of the reactor. The model was applied to the photocatalytic oxidation of trichloroethylene (TCE) in humidified air streams under different experimental conditions. The kinetic parameters determined by a three-dimensional (3-D) computational fluid dynamics model of the reactor were used in the 2-D model si…
Breakdown of Burton-Prime-Slichter approach and lateral solute segregation in radially converging flows
2005
A theoretical study is presented of the effect of a radially converging melt flow, which is directed away from the solidification front, on the radial solute segregation in simple solidification models. We show that the classical Burton-Prim-Slichter (BPS) solution describing the effect of a diverging flow on the solute incorporation into the solidifying material breaks down for the flows converging along the solidification front. The breakdown is caused by a divergence of the integral defining the effective boundary layer thickness which is the basic concept of the BPS theory. Although such a divergence can formally be avoided by restricting the axial extension of the melt to a layer of fi…
Experimental and Numerical Validation of a Wind Gust Facility
2013
The study of a vehicle moving through a lateral wind gust has always been a difficult task due to the difficulties in granting the right similitude. The facility proposed by Ryan and Dominy has been one of the best options to carry it out. In this approach, a double wind tunnel is used to send a lateral moving gust on a stationary model. Using this idea as a starting point, the ISAE has built a dedicated test bench for lateral wind studies on transient conditions. Experimental work has been carried out by means of time-resolved PIV, aiming at studying the unsteady interpenetration of the two flows coming from each wind tunnel. Meanwhile, a 3D CFD model based on URANS was set up, faithfully …
An improved immersed boundary method for curvilinear grids
2009
Abstract In the present paper we propose an extension of the direct-forcing immersed boundary technique, recently developed and employed by Verzicco and co-authors [Fadlun EA, Verzicco R, Orlandi P, Mohd-Yusof J. Combined immersed-boundary finite-difference methods for three-dimensional complex flow simulations. J Comput Phys 2000;161:35–60; Verzicco R, Fatica M, Iaccarino G, Moin P, Khalighi B. Large eddy simulation of a road vehicle with drag-reduction devices. AIAA J 2002;40(12):2447–55; Cristallo A, Verzicco R. Combined immersed boundary/large-eddy-simulations of incompressible three-dimensional complex flows. Flow Turbul Combust 2006;77(1–4):3–26.] and successively improved by Balaras …