Search results for " Flux"
showing 10 items of 583 documents
Heat and work fluxes in thermoelectric coolers
2021
Abstract Thermodynamics considers heat and work as the observables of energy. Then, in a non-equilibrium process, the fluxes of heat, work and energy are related. The expressions for the heat and energy flux densities are well known; although several conventions have been adopted. The work flux density defined from the heat and energy flux densities can be very useful in describing the energy balance when chosen to emphasize observable quantities. This paper discusses the advantages of the use of the conduction heat flux density given by Fourier’s law and a work flux density defined from it. As a case study, heat and work fluxes are evaluated in the elements of a thermoelectric cooler using…
Enhancement of heat exchanger thermal hydraulic performance using aluminum foam
2018
Abstract This paper deals with an experimental study of a turbulent forced convection in a rectangular channel partly fitted with aluminum metallic foam blocks. Experiments were carried out on samples having a constant porosity of 93.8%, different grades of 5, 20 and 40 PPI, and three different height ratios of 0.6, 0.8 and 1. The blocks were arranged in a baffle like configuration. A constant heat flux of 2 W/cm2 was applied on the bottom wall of the test section, while air velocity was varied from 1 to 5 m·s−1. Temperatures of the wall along the flow direction as well as those of the inlet and outlet sections have been measured. Additionally, pressure drop measurements across the aluminum…
Local thermal non-equilibrium effects in the Darcy–Bénard instability of a porous layer heated from below by a uniform flux
2013
Abstract The influence of the lack of thermal equilibrium between the solid phase and the fluid phase on the convective instability in a porous medium is studied. A horizontal layer with parallel and impermeable bounding walls is considered. The lower wall is assumed to be isoflux, and the upper wall isothermal. The basic motionless state is perturbed with small-amplitude disturbances, so that a linear analysis of the instability is carried out with a streamfunction-temperature formulation of the local balance equations. Then, the governing equations are solved for the normal modes, leading to an eigenvalue problem for the neutral stability. This eigenvalue problem is solved analytically, t…
Absence of correlated flux pinning by columnar defects in irradiated epitaxial Bi2Sr2CaCu2O8 thin films
1999
Abstract Using heavy-ion irradiation, we produced columnar defects of different density and orientation in epitaxial Bi 2 Sr 2 CaCu 2 O 8 thin films. Although this increases the normal state resistivity and the critical temperature is reduced proportionally to the volume fraction of damaged material, pinning-related quantities like critical current density, activation energy and depinning field are enhanced in external magnetic fields. Transport measurements in dependence of the magnetic field and its orientation consistently indicate two-dimensional pinning of pancake vortices at the columnar defects. We observe the absence of correlated flux pinning by columnar defects and compare to heav…
Friction Stir Processing: thermo-mechanical loads and consequent effects on the local material characteristics
2008
The present article is focused on the correlation between the applied thermal and mechanical loads and the consequent effects on the material in friction stir processing (FSP) operations. On one hand, the actions exerted in FSP are split compared to the results obtained with a tool without the pin at its end to a traditional one with a cylindrical pin. In this way, the thermal flux determined by the frictional forces at the tool—shoulder—workpiece interface is secluded from the mechanical stirring action made by the tool pin. On the other hand, the processed specimens are analysed in terms of residual stress state, microhardness, and average grain size values. An in-process heat treatment …
Diffuse soil gas emissions of gaseous elemental mercury (GEM) from hydrothermal-volcanic systems: An innovative approach by using the static closed-c…
2016
This study was aimed to test a new methodological approach to carry out measurements of gaseous elemental mercury (GEM) diffusively emitted from soils in hydrothermal-volcanic environments. This method was based on the use of a static closed-chamber (SCC) in combination with a Lumex® RA-915M analyzer that provides GEM measurements in a wide range of concentrations (from 2 to 50,000 ng m-3). Gas samples were collected at fixed time intervals from the SCC positioned on the ground (time-series samples). The Lumex® inlet port was equipped with a three-way Teflon valve allowing the free entrance of air through a carbon trap, in order to: (i) prevent disturbance to the Lumex® operative flow rate …
Search for Neutrino‐induced Cascades from Gamma‐Ray Bursts with AMANDA
2007
Using the neutrino telescope AMANDA-II, we have conducted two analyses searching for neutrino-induced cascades from gamma-ray bursts. No evidence of astrophysical neutrinos was found, and limits are presented for several models. We also present neutrino effective areas which allow the calculation of limits for any neutrino production model. The first analysis looked for a statistical excess of events within a sliding window of 1 or 100 seconds (for short and long burst classes, respectively) during the years 2001-2003. The resulting upper limit on the diffuse flux normalization times E^2 for the Waxman-Bahcall model at 1 PeV is 1.6 x 10^-6 GeV cm^-2 s^-1 sr^-1 (a factor of 120 above the the…
Periodic volcanic degassing behavior: The Mount Etna example
2013
[1] In contrast to the seismic and infrasonic energy released from quiescent and erupting volcanoes, which have long been known to manifest episodes of highly periodic behavior, the spectral properties of volcanic gas flux time series remain poorly constrained, due to a previous lack of hightemporal resolution gas-sensing techniques. Here we report on SO2 flux measurements, performed on Mount Etna with a novel UV imaging technique of unprecedented sampling frequency (0.5Hz), which reveal, for the first time, a rapid periodic structure in degassing from this target. These gas flux modulations have considerable temporal variability in their characteristics and involve two period bands: 40–250…
Minimization of detent force in a 1 kW linear permanent magnet generator for the conversion of sea waves energy: Numerical and experimental validation
2015
Linear permanent magnet generators are widely considered for the direct conversion of energy contained in sea waves [1-3]. Both planar and tubular structures have been proposed [4-6] and all these structures present several advantages: relative high efficiency, simplicity of the structures, high sturdiness. However, as all other linear machines they present some drawbacks: oscillations in the movement, distortion in the generated electromotive force (emf), etc. In this paper we focus our attention on the parasitic oscillations of the translator which are caused by the presence of a high detent force. Detent force is generated by the fact that magnetic energy presents a minimum when the leng…
Understanding the Effects of Fires on Surface Evapotranspiration Patterns Using Satellite Remote Sensing in Combination with an Energy Balance Model
2011
Forest fires are highly destructive for nature, affecting the landscape, the natural cicle of the vegetation, and the structure and functioning of ecosystems. Beyond that, they also provoke changes in the local and regional meteorology, and particularly in the surface energy flux patterns. In a fire-affected area, changes in the ecosystem structure and species composition modify the evapotranspiration (LE) and the rest of the terms involved in the energy balance equation. Besides, these changes in the local energy balance may persist for decades (Randerson et al., 2006). There is an increasing concern among the scientific community about the effect of forest fires on climate change at this …