Search results for " Heat transfer"
showing 10 items of 63 documents
Modeling of Melt Flow and Heat Transfer in Stationary Gas Tungsten Arc Welding with Vertical and Tilted Torches
2021
A 3D numerical simulation was conducted to study the transient development of temperature distribution in stationary gas tungsten arc welding with filler wire. Heat transfer to the filler wire and the workpiece was investigated with vertical (90°) and titled (70°) torches. Heat flux, current flux, and gas drag force were calculated from the steady-state simulation of the arc. The temperature in the filler wire was determined at three different time intervals: 0.12 s, 0.24 s, and 0.36 s. The filler wire was assumed not to deform during this short time, and was therefore simulated as solid. The temperature in the workpiece was calculated at the same intervals using heat flux, current flux, ga…
A self-consistent 2-D model for the dip angle ofmantle downflow beneath an overriding continent
1999
Abstract We demonstrate how the inclination of descending mantle flow is affected by thepresence of a continent overriding the downwelling zone. The mantle is modelled by a fluidhaving a temperature- and pressure-dependent viscosity which describes a low viscosityasthenosphere and a higher viscosity lower mantle. The fluid occupies a square x:y=10:1 boxheated from below. In the absence of overlying continents thermal convection sets in with colddownwellings being nearly vertical. A continent is placed on the convecting mantle and starts todrift. The continent is assumed to be a thick rigid plate. We consider models of two types. Model1 involves a free-floating continent. The continent is pu…
ASSESMENT OF TEMPERATURE POLARIZATION IN MEMBRANE DISTILLATION CHANNELS BY LIQUID CRYSTAL THERMOGRAPHY
2014
AbstractThe measurement of local temperature distributions within a membrane distillation (MD) channel is a crucial step for the optimization of the channel and spacer geometry. This information allows the estimation of temperature polarization phenomena, which can dramatically influence the thermal efficiency of the process and the optimal choice of the geometric configuration (net spacer features, channel size, etc.). In the present work, a recently presented experimental technique, based on the use of thermochromic liquid crystals and digital image analysis, has been employed in order to assess the temperature polarization phenomena. The local heat transfer coefficient distribution on th…
Direct numerical simulation of turbulent heat transfer in curved pipes
2012
Fully developed turbulent convective heat transfer in curved pipes was investigated by Direct Numerical Simulation for a friction velocity Reynolds number of 500, yielding bulk Reynolds numbers between 12 630 and ~17 350 according to the curvature (pipe radius/curvature radius). Three different curvatures were compared, i.e. 0 (straight pipe), 0.1 and 0.3. The Prandtl number was 0.86. The computational domain was a tract of pipe 5 diameters in length. A finite volume method was used, with multiblock structured grids of ~5.3x10E6 hexahedral volumes. Simulations were typically protracted for 20 LETOT’s starting from coarse-grid results. Results were post-processed to compute first and second …
Experimental investigations and numerical modelling of the melting process in the cold crucible
2005
PurposeAims to present recent activities in experimental investigations and numerical modelling of the induction cold crucible installation.Design/methodology/approachTemperature and velocity measurements using thermocouples and electromagnetic velocity probes were performed in aluminium melt which was used as a model melt. Measured temperature field and flow pattern were compared with transient 3D calculations based on large eddy simulation (LES) turbulence modelling scheme. Numerical results are in good coincidence with the experimental data.FindingsThe modelling results show that only 3D transient LES is able to model correctly these heat and mass transfer processes.Originality/valueIt i…
Mass transfer in nonisothermal ferrocolloids under the effect of a magnetic field
1999
Abstract The paper presents a review of newest experimental results on particle thermal diffusion in hydrocarbon based ferrofluids. The measurements are performed using a vertical thermal diffusion column, the Soret coefficient is evaluated from particle separation curves employing a simple column theory which accounts for thermal convection in the vertical channel forced by a concentration buoyancy force arising during the thermophoretic transfer of heavy particles. High positive values of the Soret coefficient of lyophilized Fe 3 O 4 and Mn x Zn 1− x Fe 2 O 4 particles in surfacted tetradecane based colloids are measured. Experiments confirm the theoretically predicted anisotropy of parti…
Convergence of the finite volume method for a conductive-radiative heat transfer problem
2013
We show that the finite volume method rigorously converges to the solution of a conductive-radiative heat transfer problem with nonlocal and nonlinear boundary conditions. To get this result, we start by proving existence of solutions for a finite volume discretization of the original problem. Then, by obtaining uniform boundedness of discrete solutions and their discrete gradients with respect to mesh size, we finally get L 2type convergence of discrete solutions.
Thermophoretic separation of ultrafine particles in ferrofluids in thermal diffusion column under the effect of an MHD convection
2000
The aim of the paper is to evaluate the Soret coeAcient ST of colloidal particles in ferrofluids from measurements of an unsteady particle separation in a flat thermodiAusion column. The column theory is modified taking into account MHD eAects of thermal convection aAected by a concentration buoyancy force. It is shown that the Hartmann eAect, not only in hydrocarbon based colloids but also in ionic magnetic fluids of relatively high electric conductivity, does not influence significantly the particle separation dynamics. From measurements, positive values of ST of surfacted particles in tetradecane based colloids are calculated. An anisotropy of the Soret eAect in the presence of a uniform…
Effect of a finite external heat transfer coefficient on the Darcy-Bénard instability in a vertical porous cylinder
2013
Publised version of an article from the journal: Physics of Fluids. Copyright (2013) American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. Article appears in Volume 25 issue 4 of the journal: http://dx.doi.org/10.1063/1.4799253 The onset of thermal convection in a vertical porous cylinder is studied by considering the heating from below and the cooling from above as caused by external forced convection processes. These processes are parametrised through a finite Biot number, and hence through third-kind, or Robin, temperature conditions imposed on the lower and upper b…
Natural convection heat transfer in a partially—or completely—partitioned vertical rectangular enclosure
1991
Abstract The effect of symmetric partitions protruding centrally from the end walls of a rectangular vertical enclosure on heat transfer rates is investigated numerically. The enclosure has opposite isothermal walls at different temperatures. The Rayleigh number is varied from 10 4 to 10 7 and the aspect ratio from 0.5 to 10. The thickness of the partitions is fixed and equal to one tenth of the width of the enclosure. Their non-dimensional length ( L / H ) is varied from 0 (non-partitioned enclosure) to 0.5 (two separate enclosures). The effect of different thermal boundary conditions at the end walls and at the partitions is included in the investigation.