Search results for " Infrared"
showing 10 items of 945 documents
Multicommutation Fourier transform infrared determination of benzene in gasoline
2004
A fully mechanized method to determine benzene in motor gasolines has been developed based on the use of Fourier transform infrared spectroscopy (FT-IR) and multicommutation. The flow network comprised a set of three-way solenoid valves and was controlled by means of a microcomputer furnished with an electronic interface and running by a software written in QUICK BASIC 4.5. The flow network and control software were designed to implement the multicommutation approach providing facilities to handle sample and reagent solutions, so that, sample dilution, external calibration and standard addition could be easily performed on-line. The method permits the direct determination of benzene without…
Vibrational Spectrometry Strategies for Quality Control of Procymidone in Pesticide Formulations
2005
Abstract Two vibrational spectrometry–based methodologies were developed for procymidone determination in wettable powdered pesticide formulations. The Fourier‐transform infrared (FTIR) procedure was based on the selective extraction of procymidone by chloroform and determination by peak area measurement between 1451 and 1441 cm−1, using a baseline correction established between 1490 and 1410 cm−1, and a precision of 0.4% and a limit of detection of 0.01% w/w procymidone for a sample mass of 25 mg were obtained. For FT‐Raman determination, the selected conditions were peak area measurement between 1005 and 995 cm−1 Raman shift, with a baseline correction fixed between 1030 and 947 cm−1, and…
Quality control of Metamitron in agrochemicals using Fourier transform infrared spectroscopy in the middle and near range
2006
Abstract Two vibrational spectrometry-based methodologies were developed for Metamitron determination in pesticide formulations. Fourier transform-middle infrared (FT-MIR) procedure was based on the extraction of Metamitron by CHCl 3 and latter determination by peak area measurement between 1556 and 1533 cm −1 , corrected with a two points baseline established from 1572 to 1514 cm −1 . Fourier transform-near infrared (FT-NIR) determination was made after the extraction of Metamitron in acetonitrile and measuring the peak area between 6434 and 6394 cm −1 corrected using a two points baseline defined between 6555 and 6228 cm −1 . Repeatability, as relative standard deviation, of 5 independent…
Simultaneous determination of Folpet and Metalaxyl in pesticide formulations by flow injection Fourier transform infrared spectrometry
2003
Fourier transform infrared (FTIR) spectrometric methodology has been developed for the simultaneous determination of Folpet and Metalaxyl in pesticide formulations. The method involves the extraction of both active principles by sonication of the sample with CHCl3 and direct measurement of the absorbance using peak height values at 1798 cm −1 corrected with a baseline defined at 1810 cm −1 for Folpet, and peak area data established from 1677 to 1667 cm −1 corrected using a baseline from 1692 to 1628 cm −1 for Metalaxyl. Limits of detection (3 s) values of 17 and 16 gg −1 were found for Folpet and Metalaxyl, respectively, with results comparable with those found by liquid chromatography with…
Fourier transform infrared determination of Fluometuron in pesticide formulations
2003
Abstract A single method has been developed for Fourier transform infrared (FTIR) determination of Fluometuron in pesticide formulations. Samples were ultrasonically shaken with CHCl3 for 5 min and the FTIR spectra of sample extracts and standards were obtained at a nominal resolution of 4 cm−1 from 4000 to 900 cm−1 accumulating 25 scans. Fluometuron determination is based on the measure of peak area from 1342 to 1321 cm−1 corrected using a baseline defined from 1352 to 1294 cm−1. This procedure provided a limit of detection of 6.5 μg g−1, a sensitivity of 0.852 a.u. g mg−1 for a pathlength of 0.11 mm, a relative standard deviation of 1.6% for three analysis of a sample containing 50.4% (w/…
Improved detection limit for ammonium/ammonia achieved by Berthelot's reaction by use of solid-phase extraction coupled to diffuse reflectance spectr…
2005
Abstract The proposed procedure is based on the extraction of the indothylmol blue into C 18 solid-phase extraction (SPE) membranes and direct quantification on the membrane surface by diffuse reflectance spectroscopy. The analytical performance of the proposed method has been evaluated for standard solutions of ammonium using reflectance values, R , as well as the Kubelka–Munk function, F ( R ). The results have been compared with those obtained by the conventional method, which uses UV–vis absorption spectroscopy with a sensor-based method. The described methodology provided satisfactory linearity and reproducibility within the ammonium concentration intervals 25–250 μg L −1 and 25–500 μg…
Determination of cyromazine in pesticide commercial formulations by vibrational spectrometric procedures
2004
Two vibrational spectrometry-based methodologies were developed for Cyromazine determination in solid pesticide formulations: a Fourier transform infrared (FTIR) procedure, based on the extraction of Cyromazine by CH3OH and direct determination in the extracts by peak height measurement at 1622 cm−1 corrected using a baseline defined at 1900 cm−1, and a FT-Raman determination, made directly on the powdered solid products using standard chromatographic glass vials as sample cells and measuring the Raman intensity between 633 and 623 cm−1 for a baseline established between 663 and 601 cm−1. The sensitivity obtained was 0.01631 absorbance g−1 mg for FTIR determination and 2.23 area values g−1 …
Novel approach for the determination of azithromycin in pharmaceutical formulations by Fourier transform infrared spectroscopy in film-through transm…
2013
Abstract This work reports the development of a new method for the determination of azithromycin in pharmaceutical formulations employing Fourier transform infrared (FTIR) technique. The measurements were performed using a novel approach based on a film-through transmission mode. Several variables that could influence the analytical performance of the method were evaluated (solvent, nominal resolution, number of scans, mode of measurement and spectral region selected for measurement). Acetonitrile was the best solvent for the determination of azithromycin, employing the absorption band of the C O group at 1729 cm− 1. The extraction of azithromycin from the formulations was made by mechanica…
Fourier transform infrared determination of imidacloprid in pesticide formulations
2004
A simple method has been developed for Fourier Transform Infrared (FTIR) determination of Imidacloprid in pesticide formulations. Samples were diluted with CHCl3 and the FTIR spectra of samples and standards were obtained at a nominal resolution of 4 cm-1 from 4000 to 900 cm-1 accumulating 25 scans. Imidacloprid determination was based on the measure of either peak area from 1577 to 1567 cm-1 or peak height at 1572 cm-1, both corrected using a horizontal baseline defined at 1900 cm-1. The limits of detection achieved, of the order of 9 µg g-1, were appropriate for the determination of Imidacloprid in commercially available formulations. FTIR results were statistically comparable to those fo…
A cost-effective method for estimating di(2-ethylhexyl)phthalate in coastal sediments.
2013
This study describes the development of a new method for the analysis of di(2-ethylhexyl)phthalate (DEHP) using 0.1-0.3 g of sediment sample, based on matrix solid phase dispersion (MSPD) using C18 as dispersant phase (0.4 g) and acetonitrile-water as eluting solvent (3.4 mL 1:3.25, v/v). No evaporation step is required. 3 mL of extracts were processed on-line by in-tube solid phase microextraction (IT-SPME) coupled to capillary liquid chromatography (CapLC) and diode array detector (DAD). A short analytical column Zorbax SB C18 (35×0.5 mm, 5 μm) provided suitable results. FTIR-ATR was employed for characterizing sediment samples and MSPD procedure. The total analysis time was less than 20 …