Search results for " Ingegneri"

showing 10 items of 809 documents

Influence of volatile solids and pH for the production of volatile fatty acids: batch fermentation tests using sewage sludge

2021

The aim of this work was to study the effect of volatile suspended solid (VSS) and pH on volatile fatty acids (VFA) production from waste activated sludge (WAS) fermentation by means of batch tests. The final goal was to gain insights to enhance VFA stream quality, with the novelty of using WAS with high sludge retention time. Results revealed that the optimum conditions to maximize VFAs and minimize nutrients and non-VFA sCOD are a VSS concentration of 5.9 g/L and initial pH adjustment to pH 10. The WAS bacterial community structures were analysed according to Next Generation Sequencing (NGS) of 16S rDNA amplicons. The results revealed changes of bacterial phyla abundance in comparison wit…

Environmental EngineeringCircular economyBatch fermentation0207 environmental engineeringBioengineering02 engineering and technology010501 environmental sciences01 natural sciencesBioreactorsNutrientVolatile fatty acidsResource recovery from wastewater020701 environmental engineeringWaste Management and Disposal0105 earth and related environmental sciencesSuspended solidsSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleBacteriaSewageRenewable Energy Sustainability and the EnvironmentChemistryGeneral MedicineHydrogen-Ion ConcentrationOther Quantitative Biology (q-bio.OT)Fatty Acids VolatilePulp and paper industry6. Clean waterQuantitative Biology - Other Quantitative BiologyActivated sludgeFOS: Biological sciencesFermentationFermentationBacterial communityRetention timeSludge
researchProduct

Water reuse from wastewater treatment: The transition towards circular economy in the water sector

2022

Water is crucial for economic development since it interacts with the agricultural, production, and energy sec-tors. However, the increasing demand and climate change put pressure on water sources. This paper argued the necessity of using reclaimed water for irrigation within the scope of a circular economy. The barriers (i.e., technological and economic, institutional/regulatory, and social) to water reuse practices were revealed. Lessons on how to overcome the barriers were learned from good practices. The roadmaps adopted in the European Union for the transition towards the circular economy were reviewed. It has been observed that these roadmaps are generally on the circularity of solid …

Environmental EngineeringCircular economySettore ICAR/03 - Ingegneria Sanitaria-AmbientaleRenewable Energy Sustainability and the EnvironmentWaterAgricultureBioengineeringGeneral MedicineWastewaterSolid WasteWater reuseRoadmapWaste WaterWaste Management and DisposalBarriersBiotechnologyBioresource Technology
researchProduct

Integrated urban water modelling with uncertainty analysis

2006

In the last twenty years, the scientific world has paid particular care towards the problems that involve the environment. Accordingly, several researches were developed to describe phenomena that take place during both wet and dry periods and to increase the knowledge in this field. In particular, attention was addressed towards the problems linked with receiving water body pollution because of the impact of rain water in the urban environment. In order to obtain a good description of the problem, it is important to analyse both quantity and quality aspects connected with all the transformation phases that characterise the urban water cycle. Today, according to this point, integrated model…

Environmental EngineeringComputer scienceCalibration (statistics)media_common.quotation_subjectIntegrated urban drainage modelling modelling uncertainty analysis receiving water impact urban water qualityOrder (exchange)Water MovementsQuality (business)CitiesQuality characteristicsUncertainty analysisReliability (statistics)Water Science and Technologymedia_commonSewageSettore ICAR/03 - Ingegneria Sanitaria-Ambientalebusiness.industryDrainage SanitaryWater PollutionEnvironmental resource managementUncertaintyEnvironmental engineeringModels TheoreticalField (geography)ItalyUrban waterbusinessWater Science and Technology
researchProduct

The influence of rainfall time resolution for urban water quality modelling

2010

The objective of this paper is the definition of a methodology to evaluate the impact of the temporal resolution of rainfall measurements in urban drainage modelling applications. More specifically the effect of the temporal resolution on urban water quality modelling is detected analysing the uncertainty of the response of rainfall–runoff modelling. Analyses have been carried out using historical rainfall–discharge data collected for the Fossolo catchment (Bologna, Italy). According to the methodology, the historical rainfall data are taken as a reference, and resampled data have been obtained through a rescaling procedure with variable temporal windows. The shape comparison between ‘true’…

Environmental EngineeringData collectionTime FactorsMeteorologySettore ICAR/03 - Ingegneria Sanitaria-AmbientaleCalibration (statistics)RainMonte Carlo methodSettore ICAR/02 - Costruzioni Idrauliche E Marittime E IdrologiaWaterModels TheoreticalGLUE rainfall temporal resolution uncertainty assessment urban stormwater quality modellingWaste Disposal FluidVariable (computer science)Water SupplyTemporal resolutionEnvironmental scienceWater qualityDrainageCitiesGLUEWater Science and TechnologyEnvironmental Monitoring
researchProduct

Nitrous oxide from integrated fixed-film activated sludge membrane bioreactor: Assessing the influence of operational variables

2017

The influence of the main operational variables on N2O emissions from an Integrated Fixed Film Activated Sludge University of Cape Town membrane Bioreactor pilot plant was studied. Nine operational cycles (total duration: 340 days) were investigated by varying the value of the mixed liquor sludge retention time (SRT) (Cycles 1–3), the feeding ratio between carbon and nitrogen (C/N) (Cycles 4–6) and simultaneously the hydraulic retention time (HRT) and the SRT (Cycles 7–9). Results show a huge variability of the N2O concentration in liquid and off-gas samples (ranged from 10−1μg N2O-N L−1to 103μg N2O-N L−1). The maximum N2O concentration (1228 μg N2O-N L−1) in the off-gas sa…

Environmental EngineeringDenitrificationHydraulic retention timeHRT0208 environmental biotechnologySRTchemistry.chemical_elementUCT-IFAS-MBRBioengineering02 engineering and technology010501 environmental sciencesMembrane bioreactorWaste Disposal Fluid01 natural sciencesBioreactorsBioreactorWaste Management and Disposal0105 earth and related environmental sciencesNitrous oxideSewageSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleRenewable Energy Sustainability and the EnvironmentChemistryEnvironmental engineeringGeneral MedicinePulp and paper industryAnoxic watersNitrogen020801 environmental engineeringActivated sludgeDenitrificationAerationC/NBioresource Technology
researchProduct

Greenhouse gas emissions from membrane bioreactors: analysis of a two-year survey on different MBR configurations

2018

Abstract This study aimed at evaluating the nitrous oxide (N2O) emissions from membrane bioreactors (MBRs) for wastewater treatment. The study investigated the N2O emissions considering multiple influential factors over a two-year period: (i) different MBR based process configurations; (ii) wastewater composition (municipal or industrial); (iii) operational conditions (i.e. sludge retention time, carbon-to-nitrogen ratio, C/N, hydraulic retention time); (iv) membrane modules. Among the overall analysed configurations, the highest N2O emission occurred from the aerated reactors. The treatment of industrial wastewater, contaminated with salt and hydrocarbons, provided the highest N2O emission…

Environmental EngineeringDenitrificationHydraulic retention timeNitrogen0208 environmental biotechnologyNitrous Oxidechemistry.chemical_element02 engineering and technology010501 environmental sciencesglobal warmingWaste Disposal Fluid01 natural sciencesIndustrial wastewater treatmentMBRGreenhouse GasesBioreactorsSurveys and Questionnaires0105 earth and related environmental sciencesWater Science and Technologynitrous oxide emissionSewageSettore ICAR/03 - Ingegneria Sanitaria-AmbientalePulp and paper industryNitrogen020801 environmental engineeringwastewater treatmentchemistryWastewaterDenitrificationEnvironmental scienceSewage treatmentAerationWaste disposal
researchProduct

Biological groundwater denitrification systems: Lab-scale trials aimed at nitrous oxide production and emission assessment

2018

Bio-trenches are a sustainable option for treating nitrate contamination in groundwater. However, a possible side effect of this technology is the production of nitrous oxide, a greenhouse gas that can be found both dissolved in the liquid effluent as well as emitted as off gas. The aim of this study was to analyze NO3 − removal and N2O production in lab-scale column trials. The column contained olive nut as organic carbon media. The experimental study was divided into three phases (I, II and III) each characterized by different inlet NO3 − concentrations (30, 50, 75 mg NO3-N L−1 respectively). Sampling ports deployed along the length of the column allowed to observe the denitrification pro…

Environmental EngineeringDenitrificationSettore AGR/13 - Chimica Agrariachemistry.chemical_element010501 environmental sciencesNitrogen cycle01 natural scienceschemistry.chemical_compoundPermeable reactive barriersBiological groundwater denitrificationEnvironmental ChemistryNitriteWaste Management and DisposalEffluentNitrogen cycle0105 earth and related environmental sciencesNitrous oxideSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleBiotrench04 agricultural and veterinary sciencesNitrous oxidePollutionchemistryGreenhouse gasEnvironmental chemistry040103 agronomy & agriculture0401 agriculture forestry and fisheriesEnvironmental scienceCarbonGroundwater
researchProduct

Greenhouse gases from sequential batch membrane bioreactors: A pilot plant case study

2016

Abstract The paper reports the results of nitrous oxide (N 2 O) emissions from aerobic and anoxic tank of a Sequential Batch Membrane Bioreactor (SB-MBR) pilot plant. The influence of salinity variation on N 2 O emission was analyzed by gradually increasing the inlet salt concentration from 0 to 10 g NaCl L −1 . The observed results showed that the N 2 O concentration of the gaseous samples was strongly influenced by the salt concentration. This result was likely related to a worsening of the nitrification activity due to the effect of salinity on autotrophic bacteria. Dissolved oxygen concentration and salinity were found to be the key factors affecting N 2 O concentration in the gaseous s…

Environmental EngineeringEnvironmental preservation0208 environmental biotechnologyBiomedical EngineeringBioengineeringSequencing batch reactorWastewater treatment02 engineering and technology010501 environmental sciencesMembrane bioreactor01 natural scienceschemistry.chemical_compoundBioprocess monitoringBioreactor0105 earth and related environmental sciencesSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleChemistryGlobal warming potentialtechnology industry and agricultureEnvironmental engineeringNitrous oxideAnoxic waters020801 environmental engineeringSequencing batch reactorSalinityPilot plantEnvironmental chemistryMembrane bioreactorNitrificationBioprocess monitoring; Environmental preservation; Global warming potential; Membrane bioreactors; Sequencing batch reactor; Wastewater treatment; Biotechnology; Bioengineering; Biomedical Engineering; Environmental EngineeringBiotechnologyBiochemical Engineering Journal
researchProduct

Nitrous oxide from moving bed based integrated fixed film activated sludge membrane bioreactors

2017

Abstract The present paper reports the results of a nitrous oxide (N 2 O) production investigation in a moving bed based integrated fixed film activated sludge (IFAS) membrane bioreactor (MBR) pilot plant designed in accordance with the University of Cape Town layout for biological phosphorous removal. Gaseous and liquid samples were collected in order to measure the gaseous as well as the dissolved concentration of N 2 O. Furthermore, the gas flow rate from each reactor was measured and the gas flux was estimated. The results confirmed that the anoxic reactor represents the main source of nitrous oxide production. A significant production of N 2 O was, however, also found in the anaerobic …

Environmental EngineeringHydraulic retention timeNitrogen0208 environmental biotechnologySettore AGR/13 - Chimica AgrariaBioreactorNitrous Oxidechemistry.chemical_elementPilot Projects02 engineering and technology010501 environmental sciencesManagement Monitoring Policy and LawMembrane bioreactor01 natural sciencesEmission factorWaste Disposal FluidMBRDenitrifying bacteriachemistry.chemical_compoundBioreactorsBioreactorPilot ProjectEmission factor; IFAS; MBR; Nitrous oxide; UCT; Denitrification; Gases; Nitrogen; Nitrous Oxide; Phosphorus; Pilot Projects; Sewage; Waste Disposal Fluid; Bioreactors; Environmental Engineering; Waste Management and Disposal; Management Monitoring Policy and LawWaste Management and Disposal0105 earth and related environmental sciencesSewageSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleChemistryGasePhosphoruPhosphorusGeneral MedicineNitrous oxideIFASNitrogen020801 environmental engineeringPilot plantActivated sludgeEnvironmental chemistryDenitrificationUCTGases
researchProduct

Moving bed membrane bioreactors for carbon and nutrient removal: The effect of C/N variation

2017

In this paper, an experimental campaign was carried out on a University of Cape Town Integrated Fixed Film Activated Sludge Membrane Bioreactor (UCT-IFAS-MBR) pilot plant. The aim of the study was to evaluate the effect of the influent C/N ratio on the system performance in terms of organic carbon, nitrogen and phosphorus removal, biomass viability (through respirometry), activated sludge features and membrane filtration properties. The experiments were organized into three phases, characterized by a variation of the C/N ratio (namely, Phase I: C/N= 5, Phase II: C/N =10; Phase III: C/N = 2). The results highlighted that the system performance was significantly affected by C/N ratio. The rem…

Environmental EngineeringIFAS-MBRBiomedical Engineeringchemistry.chemical_elementBioengineering02 engineering and technology010501 environmental sciencesMembrane bioreactor01 natural sciencesRespirometryNutrientAnimal science020401 chemical engineeringNutrient removal0204 chemical engineeringBiofilm; C/N ratio; IFAS-MBR; Nitrification; Nutrient removal; Biotechnology; Bioengineering; Environmental Engineering; Biomedical Engineering0105 earth and related environmental sciencesSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleBiofilmPhosphorusEnvironmental engineeringC/N ratioNitrificationNitrogenActivated sludgePilot plantchemistryNitrificationBiotechnology
researchProduct