Search results for " Mössbauer"
showing 10 items of 26 documents
Electrochemical and conversion electron mössbauer study of corrosion induced by acid rain
1993
Abstract The passivation of low carbon steel was studied in aqueous solution of 0.5M Na2SO4 +0.001M NaHSO3 (pH 3.5, 6.5 and 8.5) which can be considered as a model of acid rain. The used conversion electron Mossbauer spectroscopy (CEMS) with the complementary electrochemical investigations proved that the sulfite ions induce pitting corrosion at pH 3.5 and 6 5 while the measurements showed much weaker pitting at pH 8.5. The compositions and thicknesses of the passive films formed during the electrochemical treatments are determined from the CEM spectra. Only γ-FeOOH was found on the surface of the samples at pH 6.5 and 8.5. Nevertheless, at pH 3.5 the sextet belonging to Fe3C appears in the…
Layer formation on silicon steel by processing in H2/H2O at elevated temperatures
1992
Silicon steel (Fe-3wt%Si), as used for transformers and generators, has been annealed in wet hydrogen at elevated temperatures. The composition, sequence, and thicknesses of the layers found by conversion electron Mossbauer spectroscopy (CEMS) and Auger electron spectroscopy (AES) depth profiling for a 10 minutes anneal in different atmospheres are reported. In the range from 500°C to 720°C we observed carbide formation, indicating that the decarburization is hindered. Above 800°C, the layers consist of fayalite or of fayalite and iron oxides, depending on the oxygen potentialaO. At 843°C, the onset of iron oxide formation was found ataO=0.33.
High-performance Mössbauer spectroscopy: Criteria, possibilities, limitations
1992
Increasing attention is being paid to non-conventional Mossbauer methods in view of the extension of Mossbauer Spectroscopy (MS) to a broadening field of applications. With such long-lasting experiments the shortening of the measuring time required for a given statistical significance is of major practical importance. It is shown that the statistical utility rateu allows one to determine which experimental parameters have a primary role, and it also enables sucessive optimization. It is pointed out for various MS measurements that the strategy for improving the experimental performance is strongly dependent on the given problem. As examples, time-differential Mossbauer measurements and conv…
Study of Fe−Ti and Fe−TiN interfaces by conversion electron Mössbauer spectroscopy
1992
Titanium and titanium nitride-iron interfaces obtained by PVD coated thin films of Ti and TiN onto argon plasma etched iron substrates at various temperatures and negative bias were studied by use of CEMS. It was found that intermixing to Ti with Fe resulted in the appearance of an amorphous FeTi1−x phase. Furthermore, a comparison of CEM spectra of samples before and after heating in UHV has shown rather strong influence of thermal treatments on Fe/Ti as well as Fe/TiN interfaces.
Observation of substitutional Fe in CEMS measurements on synthetic CVD diamond
2004
Conversion electron Mossbauer spectroscopy measurements have been made on a diamond sample synthesized by chemical vapour deposition. The sample was implanted with 70 keV 57Fe to a dose of 5 × 1014 cm−2 and Mossbauer measurements were made on the as-implanted sample and after annealing at temperatures of 600 K, 950 K and 1470 K. The spectra at the lower temperatures were characterized by broad doublets, but the annealing at 1470 K resulted in dramatic decrease in the intensity of the doublet components, and the appearance of a strong single line with an isomer shift of δ = −0.90(5) mm/s and areal intensity of 30%, and a weaker line (5%) with δ = +0.07(4). Arguments are presented to attribut…
Optimization of a conversion electron Mössbauer spectroscopy gas flow He/CH4 proportional counter
1992
A new detector for CEMS has been built and optimized with respect to the statistical quality of spectra obtained. The optimization has been performed by measuring Mosbauer and pulse height spectra at in- and off-resonance. Single channel analyzer settings were calculated by a new optimization routine. A comparison of different detector designs has been performed using the statistical utility rate of spectra obtained from a stainless steel foil. A procedure for determining optimal operating parameters for ICEMS gas flow proportional counters is proposed.
Corrosion processes and their inhibition as studied by Mössbauer conversion and other electron spectroscopies
1989
To study corrosion processes of iron and steel and measures of their inhibition, a detailed knowledge of the phase composition and of phase transformations in very thin layers close to the attacked surface of the material is necessary. The information depths of integral (ICEMS) and depth selective (DCEMS) conversion electron Mossbauer spectroscopy are well suited for such investigations, but some effort is necessary if technical samples, i.e. nonenriched in57Fe, are to be studied. In many cases of practical importance, full information on the corroded surfaces cannot be got from Mossbauer spectra only, and a combination with Auger and photoelectron spectroscopies, in-including scanning and …
Icems and dcems study of Fe layers evaporated onto Al and Si
1990
Thin layers of57Fe (2.5 nm, 10 nm and 70 nm thickness), vacuum evaporated onto Al and Si plates, have been investigated by conversion electron Mossbauer spectroscopy (CEMS). The measurements were performed employing both a proportional counter and a channeltron for conventional and ultrahigh-vacuum integral CEMS (UHV-ICEMS) studies, respectively, and a channeltron for depth-selective CEMS (DCEMS). The phase analysis of the layers on base of experimental results has indicated the presence of metallic iron and one or two iron compounds, ascribed to iron reaction products formed with the residual gas during evaporation. These products are most likely rather stable iron nitrides, are more or le…
Conversion-electron M�ssbauer spectroscopy using 121Sb and a study of powdered ?-Sb2O3
1994
It is shown that 121Sb Conversion-Electron Mossbauer Spectroscopy (CEMS) is possible even at room temperature. The parameters and peculiarities of 121Sb CEMS are summarized. An application to powdered Sb(III) oxide shows that the material on the surface of the grains is not oxidized to Sb(V) but has changed its crystal symmetry, while the bulk of the grains still exhibits the initial cubic-crystal phase.
Problems of electron detection in Depth-Selective Conversion Electron Mössbauer Spectroscopy
1992
Applications of Depth-Selective Conversion Electron Mossbauer Spectroscopy (DCEMS) are limited by the long measuring times needed for collecting sufficient data statistics. To shorten the recording time, the background should be reduced and the detection efficiency for conversion electrons should be improved. For57Co/57Fe DCEMS, systematic studies were performed to investigate the origin, shape, and structure of the background components in DCEMS data distributions for various samples using channeltrons and low-noise scintillation counters as electron detectors.