Search results for " MORPHOLOGY"

Influence of short-term aging on mechanical properties and morphology of polymer-modified bitumen with recycled plastics from waste materials

2020

Polymer-modified bitumen (PMB) is bitumen that has been specifically engineered with polymer for providing enhanced performance in service. The aging of bitumen is a main aspect that is able to affect its final performance: during the production phase in a hot mix plant, all the binders experience short-term aging due to the high processing temperature. The same is true during the production of the modified binder, when the polymer is dispersed at high temperature in the bitumen mass. This paper aims at studying the effect of short-term aging when using different types of modifiers such as recycled polymers obtained from waste materials. A 50/70 penetration-grade bitumen has been modified, …

Dispersions of nanosilica in biocompatible copolymers

2010

Dispersions of nanosilica in matrices of biocompatible copolymers were prepared by melt blending. Copolymers with variable molecular size at fixed hydrophilic/hydrophobic ratio and nanosilicas with different interfacial areas were studied. For comparison, a nanoclay was also investigated. The interfacial area played a relevant role in conferring peculiar properties on the nanohybrids. Amazingly, the macromolecule adsorbed on the nanosilica surface maintains some crystallinity which was quantitatively evaluated. In contrast, all the macromolecule anchored to the nanoclay surface is amorphous. The change of the crystalline state was reflected in the dielectric and the electrical conductivity …

Synthesis and characterization of ZnO/ZnS/MoS2 core-shell nanowires

2017

The present research was supported by the Latvian National Research Program IMIS2 . Authors are grateful for Dr. Robert Kalendarev and Martins Zubkins for assistance in magnetron sputtering, Dr. Krisjanis Smits for TEM measurements, Dr. Roberts Zabels for AFM measurements and Reinis Ignatans for XRD measurements.

Polymeric scaffolds prepared via thermally induced phase separation: Tuning of structure and morphology

2008

Scaffolds suitable for tissue engineering applications like dermal reconstruction were prepared by Thermally Induced Phase Separation (TIPS) starting from a ternary solution PLLA/dioxane/water. The experimental protocol consisted of three consecutive steps, a first quench from the homogeneous solution to an appropriate demixing temperature (within the metastable region), a holding stage for a given residence time, and a final quench from the demixing temperature to a low temperature (within the unstable region). A large variety of morphologies, in terms of average pore size and interconnection, were obtained upon modifying the demixing time and temperature, owing to the interplay of nucleat…

FIBER DISTRIBUTION OF ASCENDING THORACIC AORTIC ANEURYSMS ASSOCIATED WITH VALVE MORPHOLOGY

2012

Morphology and structure of electrospun CoFe2O4/multi-wall carbon nanotubes composite nanofibers

2010

CoFe2O4/multiwall carbon nanotubes (MWCNTs) composite nanofibers were produced by electrospinning a dispersion of MWCNTs in a solution of polyvinylpyrrolidone, iron(III) nitrate nonahydrate, cobalt (II) acetate tetrahydrate, absolute ethanol and H2O. Microstructure was examined by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HR-TEM). Thermal behaviour was studied by thermogravimetry and differential thermal analysis (TG-DTA) and phase analysis of calcined fibers was performed by X-ray diffraction (XRD). Upon thermal treatment at 450 °C defect-free, randomly oriented composite fibers having a mean diameter of 60 ± 10 nm were obtained. The results s…

In vitro preliminary study of osteoblast response to surface roughness of titanium discs and topical application of melatonin

2014

Objectives: To observe human osteoblast behavior cultured in vitro on titanium discs (Ti) in relation to surface roughness and melatonin application. Study Design: Human osteoblasts (MG-63) were cultured on 60 Ti6Al4V discs divided into three groups: Group I: discs treated with dual acid etching; Group II dual acid etching and blasting with calcium phosphate particles; Group III (control) machined discs. Surface roughness and topography of the discs were examined with scanning electron microscope (SEM) and confocal laser scanning electron microscope( CLSM). Osteoblast adhesion, proliferation and cell morphology were determined by means of fluorescence microscopy with Image-Pro Plus software…

Morphological Control of Hydrothermal Ni(OH)2 in the Presence of Polymers and Surfactants: Nanocrystals, Mesocrystals, and Superstructures

2008

International audience; Polymers with different hydrophilic groups [polyvinylpyrrolidone (PVP), ammonium polyacrylate (APA), and hydroxypropylmethyl cellulose (HPMC)] and surfactants [cetyltrimethylammonium bromide (CTAB) and sodium dodecylbenzensulfonate (SDBS)] were used as additives to modify the crystallization of β-Ni(OH)2 in hydrothermal conditions. Marked morphological changes in the β-Ni(OH)2 particles were observed depending on the additive concentration and on the duration of the hydrothermal treatment. The final morphology is the result of a complex, time-dependent self-assembly and growth process. Well-defined particles with sizes from submicrometer range to a few micrometers co…

Roentgenographic in vitro investigation of frequency and location of curvatures in human maxillary premolars.

2006

The aim of this study was to determine the location of the root canal curvature and measure the distance from the CEJ to the first curvature using in vitro methods. Extracted maxillary premolars (n = 358) were fixed and digitally radiographed using the parallel technique. Excluded from further analysis were teeth with root caries, artificial crowns, extensive fillings, or endodontic treatments. The results were descriptively analyzed and the cumulative frequencies were calculated. The median values of the distance between CEJ and first curvature were for the first right premolars 8.4 mm (buccal) and 8.5 mm (palatal), for the first left premolars 9.1 mm (buccal) and 8.9 mm (palatal). The med…

Anodic Electro Deposition of CeO2 and Co-Doped CeO2 Thin Films

2013

CeO2 and Co containing CeO2 thin films were deposited on indium tin oxide and stainless steel by anodic electrodeposition. Scanning electron microscopy showed that the films are flat and show globular morphology and cracks resulting from volume shrinking. According to XRD and Raman Spectroscopy pure ceria layers are crystalline, while the presence of Co induces the formation of amorphous films. The good adhesion and the compactness allowed the photoelectrochemical characterization of the films. A band gap value of 2.9 eV was estimated for CeO2, while slightly higher values (̃3.0 eV) were estimated for Co containing films. A mechanism for ceria anodic electrodeposition is proposed and discus…