Search results for " Materiali"
showing 10 items of 710 documents
Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. II: Effect of different polyamides on the properties of …
2006
Poly(butylene terephthalate) (PBT) and a sample of polyamide have been melt processed in the presence of two new phosphazene compounds, namely 2,2-dichloro-4,4,6,6-bis[spyro(2',2"-dioxy-1',1"-biphenyl)]cyclotriphosphazene (2Cl-CP) and 2,2-bis(2-methoxy-4-methyleneoxy-phenoxy)-4,4,6,6-bis[spyro(2',2"-dioxy-1',1"-biphenyl)]cyclophosphazene (CP-2EPOX). The blends were prepared by using polyamide 6 (PA6) and polyamide 6,6 (PA66) in 25/75 and 75/25 w/w compositions by using a co-rotating twin-screw extruder. The materials have been completely characterized from a mechanical, rheological, and morphological point of view. The results indicate that the additives used cause an increase of the ruptur…
Characterization of a fiber reinforced semirigid liquid crystalline polymer
1997
In this work, samples of a semirigid Liquid crystalline polymer reinforced with carbon and glass fibers has been characterized. Semirigid liquid crystalline polymers (LCPs) show some advantages with respect to rigid LCPs: in particular lower processing temperatures, and better compatibility with flexible thermoplastics, but also some disadvantages: lower mechanical properties and poor thermomechanical resistance. Both properties can be improved by adding inorganic fillers. Although elastic modulus and tensile strength of the glass fiber filled LCP improve remarkably with increasing the filler content, the same properties for the carbon fiber-filled samples do not increase with increasing ti…
Nanoscale mechanical characterization of polymers by AFM nanoindentations: Critical approach to the elastic characterization
2006
AFM nanoindentations show a dependence of penetration, i.e., the relative motion between the sample and the tip (indenter), on material elastic properties when using the same load. This elationship becomes visible by using of samples being homogeneous down to the scale of nanoindentation. They were prepared from materials covering a broad range of mechanical behavior: from rubbery networks to glassy and semicrystalline polymers. The elastic modulus can be obtained applying Sneddon’s elastic contact mechanics approach. To do this, some calibrations and instrumental features have to be measured accurately. All the polymers tested show that the contact between the tip and the sample is dominat…
Time-resolved rheology as a tool to monitor the progress of polymer degradation in the melt state - Part I: Thermal and thermo-oxidative degradation …
2015
Abstract Thermal and thermo-oxidative degradation of polyamide 11 (PA11) in the melt state (T = 215 °C) are studied by resorting to time-resolved mechanical spectroscopy. Such an approach allows to elude the changes in the rheological properties occurring while testing, thus enabling the rigorous study of polymer degradation in the melt state. Different concurrent degradation reactions in oxidative (air) and non-oxidative (N2) environment are promptly guessed by studying the time evolutions of rheological functions. In particular, changes in the zero-frequency complex viscosity reflects changes in the average molecular weight, while the appearance of a yield stress in the complex viscosity …
Effects of filler type and mixing method on the physical properties of a reinforced semirigid liquid crystal polymer
1996
Semirigid liquid crystalline polymers (LCPs) show some advantages with respect to rigid LCP: in particular lower processing temperatures, better compatibility with flexible thermoplastics, but also some disadvantages. Thermal resistance of rigid LCPs is much better and the maximum working temperature is, in general, very high. The thermomechanical properties can be improved by adding inorganic fillers. In this work processing, mechanical and thermomechanical properties of a filled semirigid liquid crystal copolyester are reported. Several inorganic fillers have been used in order to put in evidence the influence of shape and dimensions of the particles on the properties of the filled materi…
Epoxy resins as a matrix material in advanced fiber-reinforced polymer (FRP) composites
2013
Abstract: This chapter discusses the epoxy resins which, thanks to their good and versatile properties, can be considered nowadays the most important class of thermosetting polymers. In particular the chapter first reviews both the epoxy resins commonly available on the market, including a new class of bio-derived epoxy resins, and the most-used curing agents. it then describes the principal characteristics of the epoxy resins and how it is possible to enhance them by adding several fillers to the epoxy system. Finally, the chapter analyzes the main engineering fields in which epoxy resins find application today and their possible future utilization.
Prediction of the morphology of polymer-clay nanocomposites
2015
Abstract Polymer nanocomposites have continually attracted increasing interest over the last decade, due to significant improvements they can offer compared to neat polymer matrices. However, the final morphology of a nanocomposite, determined by several variables, can significantly influence the macroscopic properties of the final product. Therefore, it is important to study the interactions between processing, morphology, structure and rheological properties, and the suitability of existing models in order to predict the system's behaviour with change of the main processing variables. In this work, the applicability of a predictive theory based on the Wu model was formulated and proposed …
Properties and morphology of PMMA/ABN blends obtained via MMA in situ polymerisation through γ-rays
2001
Abstract Methylmethacrylate polymerisation in the presence of 4 wt% butadiene-acrylonitrile rubber was carried out at fixed dose-rate and temperature. The effect of irradiation was investigated with respect to the mechanical and dynamic-mechanical properties in the solid state. A general increase of the “compatibilisation” on irradiation is obtained. In fact both rubber and polymethylmethacrylate glass transition temperatures, determined through dynamic-mechanical analysis, reveal the presence of strong interactions between the components. Furthermore an improvement of the mechanical tensile properties of the blends is observed when irradiation is continued after polymerisation, at least un…
Reactions Occurring during the Melt Mixing of Nylon 6 and Oxazoline−Cyclophosphazene Units
2009
Specific reactions of amino and carboxyl end groups of Nylon 6 with the reactive oxazoline groups belonging to a cyclophosphazene compound (referred as CP20XA) were carried out at 240 °C for different times, under inert atmosphere. Ny6 polymers terminated with one specific reactive chain end (-COOH or NH2) were reacted with different amounts of CP20XA to study the kinetic order of the reactions. All Ny6-CP20XA reacted products soluble in trifluoroethanol (TFE) were well characterized by MALDI-TOF MS, FT-IR and ( 1H and 13C) NMR techniques. The MALDI-TOF results show that the oxazoline rings react with the carboxyl chain ends of Ny6 following second-order kinetics. The reactions with amino c…
Anti-/Pro-Oxidant Behavior of Naturally Occurring Molecules in Polymers and Biopolymers: A Brief Review
2019
Polymers and biopolymers are continuously subjected to the action of different stress factors, such as oxygen, heat, UV light, mechanical stress, humidity, etc., during their processing and service life, undergoing overall oxidative degradation, that causes performance and property deterioration. To improve the resistance at high temperatures and long-term weatherability of the polymers and biopolymers, usually, during their manufacturing, synthetic antioxidants and UV-light stabilizers are added. In the past decade, several concerns related to the impact of the synthetic stabilizers have emerged, and to reduce their negative effect on human health and the environment, their replacement wit…