Search results for " Membrane Bioreactor"

The fouling phenomenon in membrane bioreactors: assessment of different strategies for energy saving

2012

Membrane fouling represents one of the major limiting issue for membrane bioreactor (MBR) in the wastewater treatment field. Membrane fouling and high aeration requirement (for inducing shear stress to limit fouling) in MBR systems make the operation of such systems economically demanding due to high energetic costs. Despite several studies on MBR fouling have been performed a comprehensive knowledge on how to reduce membrane fouling and consequently energy saving is still lacking and controversial. The aim of this study is to gain insights on the optimization of the operating conditions in an MBR system. In particular, the influence of the aeration intensity and the durations of filtration…

Membrane Fouling Mitigation in MBR via the Feast–Famine Strategy to Enhance PHA Production by Activated Sludge

2022

Fouling is considered one of the main drawbacks of membrane bioreactor (MBR) technology. Among the main fouling agents, extracellular polymeric substances (EPS) are considered one of the most impactful since they cause the decrease of sludge filterability and decline of membrane flux in the long term. The present study investigated a biological strategy to reduce the membrane-fouling tendency in MBR systems. This consisted of seeding the reactor with activated sludge enriched in microorganisms with polyhydroxyalkanoate (PHA) storage ability and by imposing proper operating conditions to drive the carbon toward intracellular (PHA) rather than extracellular (EPS) accumulation. For that purpos…

Characterization of wastewater and biomass activity in a membrane bioreactor using respirometric techniques

2010

Over the last two decades, Membrane Bioreactors (MBRs) emerged even more for wastewater treatment, ensuring high removal efficiencies as well as very small footprint required. Indeed, in this kind of process, a modification in biomass activity and viability can exist compared to that of a conventional activated sludge (CAS) process. In this context, respirometric analysis represents a reliable tool in order to evaluate the actual biomass kinetic parameters, to insert in mathematical models in the design phase, as well as to monitor the biomass viability, especially when these processes are operated with high sludge retention time (SRT) values. The paper presents some results of respirometri…

Influence of total solids concentration on membrane permeability in a submerged hollow-fibre anaerobic membrane bioreactor.

2012

The main aim of this work was to study the influence of the mixed liquor total solids (MLTS) concentration on membrane permeability (K 20) in a submerged anaerobic membrane bioreactor (SAnMBR) pilot plant, which is equipped with industrial hollow-fibre membranes and treats urban wastewater. This pilot plant was operated at 33°C and 70 days of SRT. Two different transmembrane fluxes (13.3 and 10 LMH) were tested with a gas sparging intensity of 0.23 Nm 3 m -2 h -1 (measured as Specific Gas Demand referred to membrane area). A linear dependence of K 20 on MLTS concentration was observed within a range of MLTS concentration from 13 to 32 g L -1 and J 20 of 10 LMH. K 20 was maintained at sustai…

Position paper - progress towards standards in integrated (aerobic) MBR modelling.

2020

Membrane bioreactor (MBR) models are useful tools for both design and management. The system complexity is high due to the involved number of processes which can be clustered in biological and physical ones. Literature studies are present and need to be harmonized in order to gain insights from the different studies and allow system optimization by applying a control. This position paper aims at defining the current state of the art of the main integrated MBR models reported in the literature. On the basis of a modelling review, a standardized terminology is proposed to facilitate the further development and comparison of integrated membrane fouling models for aerobic MBRs. ispartof: WATER …

Harvesting Energy from Wastewater Using an Innovative Anaerobic Membrane Bioreactor

2015

Energy and environmental impact of an anaerobic membrane bioreactor (AnMBR) demonstration plant treating urban wastewater

2020

Abstract In order to assess the environmental feasibility of anaerobic membrane bioreactor (AnMBR) technology for urban wastewater (UWW) treatment at ambient temperature, a demonstration plant was operated within the LIFE MEMORY project ( http://www.life-memory.eu/en/ ). This plant incorporates full-scale hollow-fiber membrane modules and was fed with the effluent from the pre-treatment of the “Alcazar de San Juan” WWTP (Alcazar de San Juan, Ciudad Real, Spain). Because of the dimensions of this plant, the system can be regarded as a previous step to the scale-up of AnMBR technology for full-scale UWW treatment. High-energy recovery potentials were achieved treating medium-/high-loaded UWW …

RESEARCHES ON THE DIGESTERS AND REACTORS WHICH CAN BE USED IN A FARM SCALE BIOGAS PLANT

2014

In the general context of searching integrated system of renewable energy production, this paper present some researches on the reactors and the digesters, as a main part of a biogas plant at a farm scale. After we present the most used types of digesters, we also concentrated over the processes which take place into a digester, one of them being the removal of H2S from biogas (desulphurisation), which can be made by various methods, either biological or chemical, taking place inside or outside the digester. In the case of biological desulphurization outside the digester, we concentrate on the types of reactors which can be used in this case. Beside the well known types of reactors, we pres…

Anaerobic dynamic membrane bioreactors for high strength wastewater treatment

2013

A laboratory scale external anaerobic dynamic membrane bioreactor (AnDMBR) treating high strength wastewater was operated to assess the effect of gas sparging velocity and organic loading rate on removal efficiency and dynamic membrane (DM) filtration characteristics. An increase in gas sparging velocity (GSV) results in a decrease in DM filtration resistance. DM or cake formation was identified as the main contribution to the total filtration resistance. Over 99% COD removal was obtained in the study regardless of the GSV. The results showed that the DM formation process proceeded until a stable cake layer thickness was reached. An effective pollutant removal and high permeate quality was …

Real-time optimization of the key filtration parameters in an AnMBR: Urban wastewater mono-digestion vs. co-digestion with domestic food waste

2018

[EN] This study describes a model-based method for real-time optimization of the key filtration parameters in a submerged anaerobic membrane bioreactor (AnMBR) treating urban wastewater (UWW) and UWW mixed with domestic food waste (FW). The method consists of an initial screening to find out adequate filtration conditions and a real-time optimizer applied to a periodically calibrated filtration model for minimizing the operating costs. The initial screening consists of two statistical analyses: (1) Morris screening method to identify the key filtration parameters; (2) Monte Carlo method to establish suitable initial control inputs values. The operating filtration cost after implementing the…