Search results for " Modeling"

showing 10 items of 2411 documents

Control of activated sludge settleability using preaeration and preprecipitation

1993

This paper deals with the addition of a preaeration and a preprecipitation stage to a conventional activated sludge process. The experiments were carried out in a pilot plant using wastewater from the city of Valencia (Spain) as feed. The effect of the F/M ratio and sludge age on sludge settleability was established. In both cases, process stability was observed to increase with respect to the conventional process. Good sludge settleability was thus assured in a greater F/M ratio range. A comparative economic study was also carried out.

Environmental EngineeringEcological ModelingEnvironmental engineeringSludge volume indexPollutionActivated sludgePilot plantWastewaterDecantationCost analysisEnvironmental scienceSewage treatmentAerationWaste Management and DisposalWater Science and TechnologyCivil and Structural EngineeringWater Research
researchProduct

Iron enrichment from hypoxic hypolimnion supports the blooming of Raphidiopsis raciborskii in a tropical reservoir.

2022

Occurring worldwide, blooms of Raphidiopsis raciborskii threaten the use of water resources especially in tropical and subtropical waterbodies. Its high flexibility in the uses of light and macronutrients (C, N, P) frustrates any bloom prediction and control based on macronutrients regulation. To identify the critical factors promoting periodic blooms of R. raciborskii, the trends of meteorological, hydrodynamic, physical, and chemical variables (including macro- and micronutrients: N, P, Fe) were analyzed in a Chinese tropical large reservoir (Dashahe reservoir) over five years. It was hypothesized that Fe availability, mediated by the mixing pattern of the reservoir, played a crucial role…

Environmental EngineeringEcological ModelingIronWaterHabitat characteristicsPollutionFeR. raciborskiiTropical reservoirOxygenSettore BIO/03 - Botanica Ambientale E ApplicataLimiting effectsWaste Management and DisposalDominanceWater Science and TechnologyCivil and Structural EngineeringCylindrospermopsisWater research
researchProduct

Nitrification of anaerobically pretreated municipal landfill leachate at low temperature

2000

Abstract Nitrification of anaerobically pretreated municipal landfill leachate (270–1000 mg COD l −1 , 53–270 mg NH 4 –N l −1 ) was studied in laboratory-scale activated sludge reactors without (AS) and with (ASC) the addition of plastic carrier material. The reactors were run at 10°C (149 d), 7°C (21 d) and 5°C (16 d). With a loading rate of 0.027 g NH 4 –N g MLVSS −1  d −1 and a hydraulic retention time of ca. 3 d, at 10°C, complete nitrification was obtained in both reactors. At 7°C, and in loading rate of 0.023 g NH 4 –N g MLVSS −1  d −1 , both reactors appeared to be overloaded and ammonium removal was only ca. 93%. At 5°C, with a lower loading rate of 0.010 g NH 4 –N g MLVSS −1  d −1 …

Environmental EngineeringHydraulic retention timeEcological ModelingPollutionchemistry.chemical_compoundWaste treatmentActivated sludgechemistryEnvironmental chemistryAmmoniumNitrificationLeachateWaste Management and DisposalEffluentWater Science and TechnologyCivil and Structural EngineeringWaste disposalWater Research
researchProduct

Semi-continuous anaerobic digestion of solid poultry slaughterhouse waste: effect of hydraulic retention time and loading.

2002

Abstract We studied the effect of hydraulic retention time (HRT) and loading on anaerobic digestion of poultry slaughterhouse wastes, using semi-continuously fed, laboratory-scale digesters at 31°C. The effect on process performance was highly significant: Anaerobic digestion appeared feasible with a loading of up to 0.8 kg volatile solids (VS)/m 3  d and an HRT of 50–100 days. The specific methane yield was high, from 0.52 to 0.55 m 3 /kg VS added . On the other hand, at a higher loading, in the range from 1.0 to 2.1 kg VS/m 3  d, and a shorter HRT, in the range from 25 to 13 days, the process appeared inhibited and/or overloaded, as indicated by the accumulation of volatile fatty acids an…

Environmental EngineeringHydraulic retention timeNitrogenchemistry.chemical_elementIndustrial wasteMethanePoultryAmmoniachemistry.chemical_compoundBacteria AnaerobicAnimal scienceBioreactorsAmmoniaAnimalsWaste Management and DisposalWater Science and TechnologyCivil and Structural EngineeringEcological ModelingFatty AcidsEnvironmental engineeringTotal dissolved solidsPollutionNitrogenRefuse DisposalAnaerobic digestionWaste treatmentchemistryAbattoirsWater research
researchProduct

Electrochemical oxidation of organics in water: Role of operative parameters in the absence and in the presence of NaCl

2008

The electrochemical oxidation of organics in water was investigated theoretically and experimentally to determine the role of several operative parameters on the performances of the process in the presence and in the absence of sodium chloride. Theoretical considerations were used to design the experimental investigation and were confirmed by the results of the electrochemical oxidation of oxalic acid (OA) at boron doped diamond (BDD) or IrO(2)-Ta(2)O(5) (DSA-O(2)) anodes in a continuous batch recirculation reaction system equipped with a parallel plate undivided electrochemical cell. Polarization curves and chronoamperometric measurements indicated that, in the presence of chlorides, the a…

Environmental EngineeringInorganic chemistryOxalic acidIncinerationSodium ChlorideElectrochemistryChemical reactionChlorideElectrolysisElectrochemical celllaw.inventionchemistry.chemical_compoundlawElectrochemical incinerationeSodium chlorideOxalic acidBDDDSAOxidation of organicsmedicineOrganic ChemicalsPolarization (electrochemistry)Waste Management and DisposalWater Science and TechnologyCivil and Structural EngineeringBoronElectrolysisEcological ModelingOxalic AcidElectric ConductivityWaterElectrochemical TechniquesHydrogen-Ion ConcentrationSettore ING-IND/27 - Chimica Industriale E TecnologicaPollutionAnodeSolutionschemistryChlorineDiamondRheologyOxidation-Reductionmedicine.drug
researchProduct

Use of Lichen and Moss in Assessment of Forest Contamination with Heavy Metals in Praded and Glacensis Euroregions (Poland and Czech Republic)

2011

The concentrations of selected metals-Cr, Ni, Cu, Zn, Cd, and Pb-were determined in the samples of Hypogymnia physodes lichen and Pleurozium schreberi moss collected in Polish and Czech Euroregions Praded and Glacensis. More specifically, the samples were collected in Bory Stobrawskie, Bory Niemodlińskie, and Kotlina Kłodzka (Poland) and in Jeseniki (Czech Republic). The concentration of metals in the samples was measured using the atomic absorption spectrometry (flame AAS technique and electrothermal atomization AAS technique). The results were used to calculate the comparison factor (CF) that quantifies the difference in concentration of a given bioavailable analyte × accumulated in liche…

Environmental EngineeringLichenArticlelaw.inventionComparison factorlawBotanyBiomonitoringEnvironmental ChemistryLichenMossWater Science and TechnologybiologyEcological ModelingHeavy metalsContaminationbiology.organism_classificationMossPollutionEcological ModellingDeposition (aerosol physics)Heavy metalsBiomonitoringEnvironmental scienceAtomic absorption spectroscopyPleurozium schreberiWater, Air, and Soil Pollution
researchProduct

Technogenic Magnetic Particles in Alkaline Dusts from Power and Cement Plants

2012

During this study, we investigated the mineralogical characterization of technogenic magnetic particles (TMPs) contained in alkaline industrial dust and fly ash emitted by coal burning power plants and cement plants. The reaction of tested dust samples varied between values of pH 8 and pH 12. Their magnetic properties were characterized by measurement of magnetic susceptibility (χ), frequency dependence of magnetic susceptibility (χ(fd)), and temperature dependence of magnetic susceptibility. Mineralogical and geochemical analyses included scanning electron microscopy with energy dispersive spectroscopy, microprobe analysis and X-ray diffraction. The TMPs in fly ash from hard coal combustio…

Environmental EngineeringMaghemiteengineering.materialcomplex mixturesArticleMagnetic susceptibilityMagnesioferritechemistry.chemical_compoundEnvironmental ChemistryWater Science and TechnologyMagnetiteCementEcological ModelingMetallurgyTechnogenic magnetic particlesHematiteequipment and suppliesPollutionMagnetic susceptibilityEcological Modellingchemistryvisual_artFly ashengineeringvisual_art.visual_art_mediumAlkaline dustsMagnetic nanoparticlesIron mineralogyhuman activitiesWater, Air, & Soil Pollution
researchProduct

Geostatistical Microscale Study of Magnetic Susceptibility in Soil Profile and Magnetic Indicators of Potential Soil Pollution

2015

Directional variograms, along the soil profile, can be useful and precise tool that can be used to increase the precision of the assessment of soil pollution. The detail analysis of spatial variability in the soil profile can be also an important part of the standardization of soil magnetometry as a screening method for an assessment of soil pollution related to the dust deposition. The goal of this study was to investigate the correlation between basic parameters of spatial correlations of magnetic susceptibility in the soil profile, such as a range of correlation and a sill, and selected magnetometric indicators of soil pollution. Magnetic indicators were an area under the curve of magnet…

Environmental EngineeringMagnetometerSoil pollutionSoil scienceDispersion (geology)complex mixturesArticlelaw.inventionlawEnvironmental ChemistryVariogramWater Science and TechnologyHydrogeologyField magnetometrySoil magnetic susceptibilityEcological Modelingequipment and suppliesPollutionMagnetic susceptibilitySoil contaminationEcological ModellingEnvironmental scienceSoil horizonSpatial variabilityMagnetic indicatorsSpatial correlationhuman activitiesWater, Air, & Soil Pollution
researchProduct

Biotrickling filter modeling for styrene abatement. Part 2: Simulating a two-phase partitioning bioreactor.

2017

Abstract A dynamic model describing styrene abatement was developed for a two-phase partitioning bioreactor operated as a biotrickling filter (TPPB-BTF). The model was built as a coupled set of two different systems of partial differential equations depending on whether an irrigation or a non-irrigation period was simulated. The maximum growth rate was previously calibrated from a conventional BTF treating styrene (Part 1). The model was extended to simulate the TPPB-BTF based on the hypothesis that the main change associated with the non-aqueous phase is the modification of the pollutant properties in the liquid phase. The three phases considered were gas, a water–silicone liquid mixture, …

Environmental EngineeringMaterials scienceHealth Toxicology and MutagenesiseducationBiotrickling filter02 engineering and technology010501 environmental sciencesThermal diffusivity01 natural sciencesTwo-phase partitioning bioreactor.Styrene:Enginyeria química::Química del medi ambient::Química atmosfèrica [Àrees temàtiques de la UPC]Filter (large eddy simulation)chemistry.chemical_compoundBioreactorsSilicone oilMass transferPhase (matter)Air PollutionCalibrationBioreactorEnvironmental ChemistryGases - PurificationEnvironmental Restoration and RemediationStyrene0105 earth and related environmental sciencesMass transfer coefficientWater PollutionPublic Health Environmental and Occupational HealthEnvironmental engineeringGeneral MedicineGeneral ChemistryMechanicsModels Theoretical021001 nanoscience & nanotechnologyPollutionGasos - DepuracióBiodegradation EnvironmentalchemistryModels ChemicalBiofilmsMathematical modelingBiological air treatment0210 nano-technologyFiltrationChemosphere
researchProduct

Application of a new dynamic transport model to predict the evolution of performances throughout the nanofiltration of single salt solutions in conce…

2018

Although many knowledge models describing the rejection of ionic compounds by nanofiltration membranes are available in literature, they are all used in full recycling mode. Indeed, both permeate and retentate streams are recycled in order to maintain constant concentrations in the feed solution. However, nanofiltration of real effluents is implemented either in concentration or diafiltration modes, for which the permeate stream is collected. In these conditions, concentrations progressively evolve during filtration and classical models fail to predict performances. In this paper, an improvement of the so called "Donnan Steric Pore Model", which includes both volume and concentration variat…

Environmental EngineeringMaterials scienceSalt (chemistry)02 engineering and technology010501 environmental sciences01 natural scienceslaw.inventionAdsorptionlaw[CHIM]Chemical SciencesNanotechnologyProcess engineeringWaste Management and DisposalFiltrationComputingMilieux_MISCELLANEOUS0105 earth and related environmental sciencesWater Science and TechnologyCivil and Structural Engineeringchemistry.chemical_classificationbusiness.industryEcological ModelingMembranes ArtificialPermeationModels Theoretical021001 nanoscience & nanotechnologyPollutionDiafiltrationMembranechemistryVolume (thermodynamics)Nanofiltration0210 nano-technologybusinessFiltrationWater research
researchProduct