Search results for " PRIN"
showing 10 items of 1809 documents
Measuring Inaccessible Residual Stresses Using Multiple Methods and Superposition
2010
The traditional contour method maps a single component of residual stress by cutting a body carefully in two and measuring the contour of the cut surface. The cut also exposes previously inaccessible regions of the body to residual stress measurement using a variety of other techniques, but the stresses have been changed by the relaxation after cutting. In this paper, it is shown that superposition of stresses measured post-cutting with results from the contour method analysis can determine the original (pre-cut) residual stresses. The general superposition theory using Bueckner’s principle is developed and limitations are discussed. The procedure is experimentally demonstrated by determini…
Mechanism of photoluminescence in intrinsically disordered CaZrO3 crystals: First principles modeling of the excited electronic states
2017
Abstract CaZrO3 (CZO) powders obtained by the polymeric precursor method at 400 °C, and then, the samples were annealed at different temperatures (400, 600, 800, and 1000 °C) and characterized by X-ray diffraction, Raman and ultraviolet–visible spectroscopic methods, along with photoluminescence (PL) emissions. First principle calculations based on the density functional theory (DFT), using a periodic cell models, provide a theoretical framework for understanding the PL spectra based on the localization and characterization of the ground and electronic excited states. Fundamental (singlet, s ) and excited (singlet, s* , and triplet, t* ) electronic states were localized and characterized us…
Diffraction management and sub-diffractive solitons in periodically driven Bose–Einstein condensates
2009
Abstract We theoretically investigate the diffraction management in Bose–Einstein condensates (BECs) in one- (1D), two- (2D) and three-dimensional (3D) geometries. The management technique is based on the superposition of harmonic lattices’ potentials moving at a common speed but in different directions, leading to a harmonic spatio-temporal modulation of the potential. In this way a reduction in, and eventually the disappearance of usual diffraction and emergence of fourth-order diffraction are achieved. We show sub-diffractive solitons in such a diffraction managed system and demonstrate their stability in 1D, 2D and 3D. In 2D and 3D cases we investigate diffraction management by lattices…
Devil's lenses.
2007
In this paper we present a new kind of kinoform lenses in which the phase distribution is characterized by the “devil’s staircase” function. The focusing properties of these fractal DOEs coined devil’s lenses (DLs) are analytically studied and compared with conventional Fresnel kinoform lenses. It is shown that under monochromatic illumination a DL give rise a single fractal focus that axially replicates the self-similarity of the lens. Under broadband illumination the superposition of the different monochromatic foci produces an increase in the depth of focus and also a strong reduction in the chromaticity variation along the optical axis.
Diffraction-free propagation of subwavelength light beams in layered media
2010
Self-collimation of tightly localized laser beams demonstrated in periodic media relies on a perfect-matched rephasing of the Fourier constituents of the wavefield induced by a plane isofrequency curve. An alternate way paved for the achievement of such a phase matching condition developed a suitable spatial filtering in order to select those frequencies experiencing the same phase velocity projected over a given orientation. In principle this procedure is valid for complex structured metamaterials. However, a great majority of studies have focused on free-space propagation leading to the well-known Bessel beams. This paper is devoted to the analysis of this sort of nondiffracting beams tra…
3D printed diffractive terahertz lenses
2016
[EN] A 3D printer was used to realize custom-made diffractive THz lenses. After testing several materials, phase binary lenses with periodic and aperiodic radial profiles were designed and constructed in polyamide material to work at 0.625 THz. The nonconventional focusing properties of such lenses were assessed by computing and measuring their axial point spread function (PSF). Our results demonstrate that inexpensive 3D printed THz diffractive lenses can be reliably used in focusing and imaging THz systems. Diffractive THz lenses with unprecedented features, such as extended depth of focus or bifocalization, have been demonstrated.
The continuous cooling transformation (CCT) as a flexible tool to investigate polymer crystallization under processing conditions
2009
An experimental route for investigating polymer crystallization over a wide range of cooling rates (from 0.01 to 1000◦C/s) and pressures (from 0.1 to 40 MPa) is illustrated, using a method that recalls the approach adopted in metallurgy for studying structure development in metals. Two types of experimental setup were used, namely an apparatus for fast cooling of thin films (100–200 μm thick) at various cooling rates under atmospheric pressure and a device (based on a on-purpose modified injection molding machine) for quenching massive samples (about 1–2 cm3) under hydrostatic pressure fields. In both cases, ex situ characterization experiments were carried out to probe the resulting struct…
Isotactic polypropylene solidification under pressure and high cooling rates. A master curve approach
2000
Solidification in industrial processes very often involves flow fields, high thermal gradients and high pressures: the development of a model able to describe the polymer behavior becomes complex. Recently a new equipment has been developed and improved to study the crystallization of polymers when quenched under pressure. An experimental apparatus based on a modified, special injection moulding machine has been employed. Polymer samples can be cooled at a known cooling rate up to 100 °C/s and under a constant pressure up to 40 MPa. Density, Micro Hardness (MH), Wide angle X-ray diffraction (WAXD), and annealing measurements were then used to characterize the obtained sample morphology. Res…
Aqueous Processed Biopolymer Interfaces for Single-Cell Microarrays
2020
Single-cell microarrays are emerging tools to unravel intrinsic diversity within complex cell populations, opening up new approaches for the in-depth understanding of highly relevant diseases. However, most of the current methods for their fabrication are based on cumbersome patterning approaches, employing organic solvents and/or expensive materials. Here, we demonstrate an unprecedented green-chemistry strategy to produce single-cell capture biochips onto glass surfaces by all-aqueous inkjet printing. At first, a chitosan film is easily inkjet printed and immobilized onto hydroxyl-rich glass surfaces by electrostatic immobilization. In turn, poly(ethylene glycol) diglycidyl ether is graft…
Slaveries and New Slaveries: Which Role for Human Dignity?
2020
This paper aims at reflecting on the role of the notion of "human dignity" with respect to slavery and new slaveries. First of all, a very brief reflection is carried out on the different legal meanings of the notion at stake in general terms (para. 2). On this basis, some remarks are developed with specific regard to the role played by dignity concerning new slaveries in the case law of international tribunals (European and Inter-American Courts of Human Rights, International Criminal Court, International Criminal Tribunal for the Former Yugoslavia: paras 3 and 4), particularly in the very recent case law of the European Court (para. 5) Such a role is far from being insignificant: the idea…