Search results for " Photogrammetry"
showing 10 items of 75 documents
An automatic approach for rill network extraction to measure rill erosion by terrestrial and low‐cost unmanned aerial vehicle photogrammetry
2019
For an erosion event (October 2016) occurred at the Sparacia experimental area (Southern Italy), both terrestrial and low-altitude aerial surveys were carried out by consumer grade camera and quadcopter (low-cost unmanned aerial vehicle [UAV]) to measure rill erosion on two plots with steepness of 22% and 26%. Applying the structure from motion (SfM) technique, the three-dimensional digital terrain models (3D-DTMs) and the quasi three-dimensional models (2.5D-digital elevation model [DEM]) were obtained by the two surveys. Furthermore, 3D-DTM and DEM were built using the available aerial photographs (166) and adding 40 terrestrial photographs. For the first time, the convergence index was a…
Flow-bed interactions analysis and application of automatic close range digital photogrammetric survey in a laboratory flume
2014
This paper reports on a laboratory study in which the automatic digital photogrammetric survey was applied to derive the high-resolution Digital Surface Model (DSM) of the bed topography, used for the flow-bed interactions analysis, in a large amplitude meandering laboratory flume. The analysis has been conducted with the aid of detailed data of three-dimensional flow field previously collected using the acoustic Doppler velocity profiler DOP2000. The applied surveying procedure has allowed the evaluation of the DSM with a resolution of ±0.5 mm. The detailed DSM has been compared with peculiar maps describing the flow velocity pattern (downstream and the crossstream flows) and the shear vel…
HIGH QUALITY TEXTURE MAPPING PROCESS AIMED AT THE OPTIMIZATION OF 3D STRUCTURED LIGHT MODELS
2019
Abstract. This article presents the evaluation of a pipeline to develop a high-quality texture mapping implementation which makes it possible to carry out a semantic high-quality 3D textured model. Due to geometric errors such as camera parameters or limited image resolution or varying environmental parameters, the calculation of a surface texture from 2D images could present several color errors. And, sometimes, it needs adjustments to the RGB or lightness information on a defined part of the texture. The texture mapping procedure is composed of mesh parameterization, mesh partitioning, mesh segmentation unwraps, UV map and projection of island, UV layout optimization, mesh packing and mes…
BIFOCAL PAIRS OF IMAGES FOR LOW-COST SURVEY IN CLOSE RANGE PHOTOGRAMMETRY
2019
Abstract. This paper present a method for close range photogrammetry based on an camera positioning scheme in which two cameras capture an equal portion of an object at the same scale, but have different focal lengths and camera-to-object distances. This scheme is alternative to the stereoscopic scheme and is associated with a system of equations which permits one to calculate first the relief displacement of points on a photograph and then their relief relative to a reference plane. The obtained relief and relief displacement values can be used to produce low-cost orthophotographs by using software for image processing, which doesn’t need to be dedicated, but has to provide measurement and…
RPAS AND TLS TECNIQUES FOR ARCHAEOLOGICAL SURVEY: THE CASE STUDY OF THE ARCHAEOLOGICAL SITE OF ERACLEA MINOA (ITALY)
2018
Abstract. Digital documentation and 3D modelling of archaeological sites are important for understanding, definition and recognition of the values of the sites and of the archaeological finds. The most part of archaeological sites are outdoor location, but a cover to preserve the ruins protects often parts of the sites. The possibility to acquire data with different techniques and merge them by using a single reference system allows creating multi-parties models in which 3D representations of the individual objects can be inserted. The paper presents the results of a recent study carried out by Geomatics Laboratory of University of Palermo for the digital documentation and 3D modelling of E…
THE VIRTUALIZATION OF CH FOR HISTORICAL RECONSTRUCTION: THE AR FRUITION OF THE FOUNTAIN OF ST. GEORGE SQUARE IN VALLETTA (MALTA)
2020
Abstract. Improving accessibility to Cultural Heritage (CH) is an increasingly urgent challenge today. It is not only a matter of physical inaccessibility but also temporal, considering that part of CH now lost. Fortunately, the most modern technological tools are helping to break down both space and time barriers. In facts, recent advances in representation, 3D modelling and survey methodologies opened new scenarios for valorization and conservation of CH. In particular, the improvement of quality in resolution and sensor sensitivity of cameras allowed to achieve the right level of 3D reconstruction through digital photogrammetry procedures. In the same field, terrestrial laser scanners (T…
SURVEY AND VIRTUAL RECONSTRUCTION OF ANCIENT ROMAN FLOORS IN AN ARCHAEOLOGICAL CONTEXT
2019
Abstract. Despite the consistent development of approaches aimed at the virtual reconstruction of whole houses or archaeological monuments, the variety of technologies involved in virtual reconstruction procedures and the complexity of a rigorous process to provide validation models, seems to limit a univocal and shared standards adoption. For example, compared to the large number of contributions on the virtual reconstruction of whole architectures or cultural heritage sites, only a few works have proposed a rigorous workflow specific to mosaics and ancient floors and to their virtual reconstruction. The goal of this work is to present the first results on the virtual reconstruction of the…
THE MAIN PORTAL OF THE CATHEDRAL OF MONREALE: FIRST GEOMETRIC ANALYSIS AND INTERPRETIVE ASSESSMENT OF ARCHITECTURAL FEATURES
2017
Abstract. Nowadays, 3D documentation of architectural assets is becoming a demanding task for the valorisation of Cultural Heritage especially after a restoration project. The 3D documentation can be used for detailed analysis of specific elements, for monitoring the state of conservation and for valorisation actions. The paper describes the results of the 3D close-range photogrammetry survey of the main portal of the Cathedral of Monreale (Palermo, Italy). The Cathedral is one the most important monumental complexes in Sicily that, for its high historical and artistic importance has been inscribed on UNESCO’s World Heritage List since 2015. The main portal of the Cathedral has been recentl…
GEOMATIC METHODOLOGIES FOR THE STUDY OF TEATRO MASSIMO IN PALERMO (ITALY)
2017
Abstract. This work illustrates the use of geomatics techniques for the documentation of Teatro Massimo in Palermo (Italy), one of the most important and big in Italy and in Europe. The theatre is characterized by a very complex structure and is realized also using innovative solution, studied at the time of the project specifically for this building; for example, an original system was realized for a natural air-conditioning system of the auditorium. Due to his complexity, the documentation of the Teatro Massimo requires studying specific survey solutions for the different parts of the building. In this paper, some studies on two of the most representative parts of the building were descri…
SMART SfM: SALINAS ARCHAEOLOGICAL MUSEUM
2017
Abstract. In these last years, there has been an increasing use of the Structure from Motion (SfM) techniques applied to Cultural Heritage. The accessibility of SfM software can be especially advantageous to users in non-technical fields or to those with limited resources. Thanks to SfM using, everyone can make with a digital camera a 3D model applied to an object of both Cultural Heritage, and physically Environment, and work arts, etc. One very interesting and useful application can be envisioned into museum collection digitalization. In the last years, a social experiment has been conducted involving young generation to live a social museum using their own camera to take pictures and vid…