Search results for " Plastic"
showing 10 items of 3463 documents
RILEM TC 279 WMR round robin study on waste polyethylene modified bituminous binders: advantages and challenges
2022
inter-laboratory experiments were designed to evaluate the impact of plas- tic waste blended directly in bitumen and to assess the properties, using conventional and advanced bituminous binder testing. The blends tar- geted 5% of plastic waste in 95% bitumen, using two types of polyethy- lene (PE) primary (pellets) and secondary (shreds) waste. The experiments showed that the addition of PE waste to bitumen does not alter the chem- istry of the bitumen, the blending is physical. The DSR results indicate a strong dependency on the testing temperature as at low temperatures the composite material bitumen and PE behave both elastically whereas, at higher temperatures, the bitumen becomes visco…
Comparative Investigation on the Soil Burial Degradation Behaviour of Polymer Films for Agriculture before and after Photo-Oxidation
2020
Polymer films based on biodegradable polymers, polyethylene (PE) and modified PE with oxo-degradable additive were prepared by film blowing. Carbon black (1%) was added to all the films. Commercial biodegradable Ecovio®
The role of the matrix-filler affinity on morphology and properties of polyethylene/clay and polyethylene/ compatibilizer/clay nanocomposites drawn f…
2009
In this work the structural variations and mechanical performance of polyethylene/clay nanocomposite drawn fibres, also in the presence ofcompatibilizer, such as a commercial maleic anhydride grafted polyethylene, PEgMA, was studied. In the isotropic state both systems show intercalated morphology.After spinning and cold drawing, by adding the nanoparticles, the tensile strength as a function of the draw ratio increases and this rise is more pronounced for the filled compatibilized system. The reduction of the elongation at break, on the contrary, is about the same for all the examined samples. The orientation of the macromolecules, evaluated by measurements of the birefringence and calorim…
A supported titanium postmetallocene catalyst: Effect of selected conditions on ethylene polymerization
2011
Ethylene polymerization with a titanium complex [N,N-ethylenebis(3-methoxysalicylideneiminato)titanium dichloride] immobilized on the magnesium support with the formula MgCl2(THF)0.32(Et2AlCl)0.36 was studied. In particular, the effects of polymerization temperature, monomer pressure, and polymerization time on the activity of the catalyst and on the polyethylene properties (molecular weight and its distribution, melting point, crystallinity, and bulk density) were evaluated. The findings of investigations prove that the studied supported titanium catalyst is highly active in ethylene polymerization, and its activity increases with increasing temperature and monomer pressure. Moreover, stab…
Competition between chain scission and branching formation in the processing of high-density polyethylene: effect of processing parameters and of sta…
2009
Two samples of high-density polyethylene with different molecular weight were processed in a batch mixer and the rheological and structural properties were investigated. In particular, the effect of different processing parameters and the eventual presence of different stabilizers were evaluated. Actually, two reactions may occur during processing: branching/crosslinking or chain scission. The results indicate that when the processing conditions promote a scarce mobility of the macromolecular chains (lower temperatures, lower mixing speed, and higher molecular weight), branching is more favored than chain scission. On increasing the mobility of the chain (higher temperature, higher mixing s…
On the effectiveness of different additives and concentrations on the re-building of the molecular structure of degraded polyethylene
2006
Mechanical recycling is an easy and economic way to re-use plastic waste as secondary materials, but, in general, their properties are worse with respect to the reclaimed materials and the virgin polymer. The aim of this work was to study the effect of concentration and reaction kinetics of two additives, an ethylene-co-glycidyl methacrylate (Lotader) and a hydroxylamine derivative (CGX), in the re-building of a degraded polyethylene. CGX is a nitroxyl radical generator able to form branching in polyolefins while the epoxy groups of Lotader can react with the functional groups present in the recycled polyethylene. The results indicate that the CGX has a higher reaction rate than Lotader, pr…
Transition metal complexes of tetradentate and bidentate Schiff bases as catalysts for ethylene polymerization: Effect of transition metal and cocata…
2009
This article compares catalytic performance of ethylene polymerization in similar polymerization conditions of transition metal complexes having two ligands [O,N] (phenoxy-imine) and having one tetradentate ligand [O,N,N,O] (salphen or salen). It is shown that the activity of both complex types as well as the product properties depend in the same way on the type of central metal in the complex and on the cocatalyst used. Although the type of ligand has some effect on the catalyst activity, yet it does not control the properties of the obtained products. The vanadium and zirconium complexes, irrespective of the cocatalyst used, yield linear polyethylene with high molecular weight (a few hund…
Effect of sample preparation on gel permeation chromatography results of determination of molecular weight of polyethylene obtained with using of zir…
2003
Molecular weights of polyethylene (PE) obtained with using of zirconocene catalyst activated with large excess of methylaluminoxane (MAO) were determined by gel permeation chromatography (GPC) method. It was found that repeatability of the measurements is strongly influenced by MAO remained in PE samples as well as time of sample keeping in the apparatus (dissolution + measurement time) at temp. 142 °C. A method of MAO removing from PE samples, before GPC measurement, based on additional washing of the sample with HF in methanol solution has been proposed. This modification leads to better both authenticity and repeatability of the results. Studies on the influence of time of sample keeping…
Effect of immobilization of titanocene catalyst in aralkyl imidazolium chloroaluminate media on performance of biphasic ethylene polymerization and p…
2012
1-(2-Phenylethyl)-3-methylimidazolium and 1-benzyl-3-methylimidazolium chloroaluminates, [Ph-C2mim][AlCl4] and [Bzlmim][AlCl4], were applied as media of the Cp2TiCl2 catalyst for biphasic ethylene polymerization. The studied aralkyl ionic liquids ensure greater stability of the catalyst at higher temperatures and more regular morphology of the produced polyethylene than analogous 1-n-alkyl-3-methylimidazolium chloroaluminates. The alkylaluminium compound participates in the termination reaction of the polymer chain. The catalyst is stable and enables recycling of the ionic liquid phase in the consecutive polymerization reactions. The [Ph-C2mim][AlCl4] ionic liquid and AlEt2Cl alkylaluminium…
Weathering of low-density polyethylene grafted with itaconic acid in laboratory tests
2011
Polyethylene grafted with itaconic acid was subjected to weathering under laboratory accelerated conditions. The course of the photo-oxidative degradation process of that material was studied by FTIR spectroscopy both through quantitative measurements of changes in absorbance values at selected wave numbers and through measurements of surface area values for absorption bands which were separated by means of deconvolution. The use of both those procedures of quantitative determinations resulted in a general conclusion that the oxidation process was initiated from the very first moment of irradiation, and it produced ketones, acids, esters (intramolecular and of acetate type), peracids, peres…