Search results for " Polyethylene"
showing 10 items of 229 documents
Dielectric and dynamic-mechanical behaviour of ethylene-vinyl alcohol copolymers
1983
Abstract Dynamic-mechanical and dielectric measurements on ethylene-vinyl alcohol copolymers with two different vinyl alcohol contents and, for comparison on polyvinylalcohol and low density polyethylene, have been carried out in order to clarify the nature of the relaxation peak. The relaxation peak observable in the dielectric loss curves of the copolymers has been assigned to the interfacial polarization, MWS type, occurring between hydrogen bonded hydroxyl groups and the apolar polyethylene segments. The shoulder also present in the e″-T curves of the copolymers seems to correspond to the glass transition peak which is hidden since the dielectric loss curve increases quickly because of …
Extensional flow of HDPE/LDPE blends
1982
Elongational viscosity data, obtained through the converging flow analysis by Cogswell, are presented for two types of HDPE/LDPE blends at various compositions and different temperatures. The results relative to the homopolymer parents compare favourably with literature data obtained also with different and more sophisticated techniques. Those relative to blends show peculiar features for the two cases: when the newtonian viscosity of the LDPE is higher all the blends show a behaviour typical of the LDPE with a maximum in η el /η0 enhanced at small percentage of HDPE; when the newtonian viscosity of the LDPE is similar to that of the HDPE there is only a gradual change in the properties.
The role of micro-structural and mechanical properties in the framework of the model for damage inception and growth from air-filled voids in Polyeth…
2007
An innovative, physical, aging and life model for polymeric insulation systems, founded on damage inception and growth at the level of microscopic cavities, was developed previously by the authors. This paper is focused on the role played by micro-structural and mechanical properties (such as crystallinity and Young's modulus) in the framework of such model. These concepts are applied to the case of LDPE, HDPE and XLPE matrixes. The relevant estimates of damage growth rate and time-to-failure as a function of void size and applied electric field in typical working conditions for HVDC power cables are performed. The results show that, under the assumptions made, the crystallinity level itsel…
Effect of different dispersing additives on the morphology and the properties of polyethylene-based nanocomposite films
2011
In this work, the use of a polar wax, e.g. amphiphilic Tegomer ® E 525 (TEG) is investigated with the aim of mod- ifying, and possibly improving, the dispersion of an organically modified nanoclay (OMMT), loaded at 5 wt%, in a poly- ethylene matrix (PE) at relatively low loading levels. We have indeed found that the incorporation of low loadings, e.g. 0.5 wt%, of TEG, an amphiphilic block co-polymer, into a PE/OMMT sample results in a substantial improvement of the clay dispersion in the nanocomposite and, consequently, of the mechanical and thermomechanical properties of the films. The achieved results are comparable to those obtained for systems containing traditional dispersing agents su…
Slow pyrolysis of an LDPE/PP mixture: Kinetics and process performance
2021
Abstract High- and low-density polyethylene (HDPE and LDPE) and polypropylene (PP) are the most common polymers among plastic waste as they have multiple commercial applications. This study focused on thermal degradation characteristics and kinetic of a plastic mixture with a composition of 92.5 wt% LDPE and 7.5% PP. Thermal decomposition characteristics of the plastic mixture was analysed through thermo-gravimetric analysis (TGA). The overall kinetic of the process was studied using the modified Coats−Redfern method and the Ozawa-Flynn-Wall (OFW) method. The apparent activation energy (E) and pre-exponential factor (A) obtained were 316.0 kJ/mol; 8.09E+21 min−1 and 311.5 kJ/mol; 4.35E+21 m…
Improvement of photo-stability of LLDPE-based nanocomposites
2006
LLDPE-based nanocomposites undergo faster photo-oxidation than the unfilled matrix and the extent of their physical properties deterioration, namely elongation at break and tensile strength, is dependent on the organo-nanoclay loading. The observed acceleration is not due to faster photo-oxidation but rather due to a reduction of the oxidation induction time. The presence in the organoclays of trace amounts of metal ions may be promoting catalytic photodegradation. While UV absorbers provide useful protection, use of a metal deactivator has been found to greatly enhance the photo-stability of the LLDPE-based nanocomposites. Combinations of a metal deactivator and UV absorber yield synergist…
The antioxidant behavior of functional nitroxide grafted polyethylene samples
2015
In this work, the thermo- and photo-oxidation stability of functional nitroxide grafted polyethylene (PE) samples was tested.
Photo-Oxidative and Soil Burial Degradation of Irrigation Tubes Based on Biodegradable Polymer Blends
2019
: Irrigation tubes based on biodegradable polymers were prepared via an extrusion-drawing process by Irritec and compared to conventional pipes made of high-density polyethylene (HDPE). A commercial polylactide/poly (butyleneadipate-co-butyleneterephthalate) (PLA/PBAT) blend (Bio-Flex®
Surface Modification of Porous Polyethylene Implants with an Albumin-Based Nanocarrier-Release System
2021
Background: Porous polyethylene (PPE) implants are used for the reconstruction of tissue defects but have a risk of rejection in case of insufficient ingrowth into the host tissue. Various growth factors can promote implant ingrowth, yet a long-term gradient is a prerequisite for the mediation of these effects. As modification of the implant surface with nanocarriers may facilitate a long-term gradient by sustained factor release, implants modified with crosslinked albumin nanocarriers were evaluated in vivo. Methods: Nanocarriers from murine serum albumin (MSA) were prepared by an inverse miniemulsion technique encapsulating either a low- or high-molar mass fluorescent cargo. PPE implants …
Polietylen liniowy małej gęstości
2002
Artykuł o charakterze przeglądowym dotyczy jednego z gatunków polietylenu, tj. liniowego polietylenu małej gęstości (PE-LLD) stanowiącego kopolimer etylenu z niewielką ilością (kilku %) wyższej l-olefiny otrzymywany metodą polimeryzacji koordynacyjnej z udziałem metaloorganicznych układów katalitycznych. Omówiono wpływ typu katalizatora, w szczególności nowoczesnych układów metalocenowych, na aktywność w kopolimeryzacji i efektywność wbudowania komonomeru do łańcucha polietylenowego. Przedstawiono przemysłowe metody otrzymywania PE-LLD oraz charakterystykę tego produktu na tle znanych gatunków polietylenu - PE-LD i PE-HD. Omówiono także wpływ budowy chemicznej PE-LLD na jego podstawowe właś…