Search results for " ROUGH."
showing 10 items of 200 documents
Surface-state electrons on a hydrogen film. 1. Annealing of the film
1991
We have investigated the surface of thin films (thickness ∼2 µm) of solid H2 between 1.5 and 4.2 K by measuring the ac conductivity of surface-state electrons (SSE). The films were prepared on a glass substrate by quench condensation at 1.5 K and were therefore initially strongly disordered. In fact the surface of the virgin films before any heat treatment was so rough that no current due to SSE could be observed. Annealing the films decreased the surface roughness and gave rise to a thermal-activation-type temperature dependence of the SSE conductivity. By proper heat treatment up to 8 K the activation energy could be reduced to 10kB.
Correction of the tip convolution effects in the imaging of nanostructures studied through scanning force microscopy
2014
AFM images are always affected by artifacts arising from tip convolution effects, resulting in a decrease in the lateral resolution of this technique. The magnitude of such effects is described by means of geometrical considerations, thereby providing better understanding of the convolution phenomenon. We demonstrate that for a constant tip radius, the convolution error is increased with the object height, mainly for the narrowest motifs. Certain influence of the object shape is observed between rectangular and elliptical objects with the same height. Such moderate differences are essentially expected among elongated objects; in contrast they are reduced as the object aspect ratio is increa…
Efficient Perovskite Light-Emitting Diodes: Effect of Composition, Morphology, and Transport Layers
2018
Organic-inorganic metal halide perovskites are emerging as novel materials for light-emitting applications due to their high color purity, band gap tunability, straightforward synthesis, and inexpensive precursors. In this work, we improve the performance of three-dimensional perovskite light-emitting diodes (PeLEDs) by tuning the emissive layer composition and thickness and by using small-molecule transport layers. Additionally, we correlate PeLED efficiencies to the perovskite structure and morphology. The results show that the PeLEDs containing perovskites with an excess of methylammonium bromide (MABr) to lead bromide (PbBr2) in a 2:1 ratio and a layer thickness of 80 nm have the highes…
Physical Fundamentals of Biomaterials Surface Electrical Functionalization
2020
This article is focusing on electrical functionalization of biomaterial&rsquo
Effect of finishing and polishing systems on the surface roughness and color change of composite resins
2020
Background This study is to examine the surface roughness and color changes occurring on composite resins following the application of different finishing and polishing systems. Material and Methods In our study, a total of 200 samples were prepared from composites resin (6×2 mm) containing supra-nano, submicron hybrid, nanohybrid, nano-ceramic and microhybrid filler. They were polished with diamond, aluminum oxide, silicon carbide finishing and polishing systems. The initial color values of composite samples were measured with a spectrophotometer and surface roughness values with a profilometer. After that, samples were immersed of coffee solution and color measurements were repeated on th…
Effect of water-jet flossing on surface roughness and color stability of dental resin-based composites.
2019
Background The purpose of this in vitro study was to investigate the effects of water-jet flossing on the color stability and surface roughness of five resin-based composites. Material and methods Five commercially available composite resins were studied. Nine disc-shaped specimens (6x2mm) were fabricated from each composite. The specimens were randomly allocated into three groups and three different treatments were performed on each group: storage in water (control group), water-jet flossing using 50 Psi water pressure, and water-jet flossing using 100 Psi water pressure. The water-jet flossing was performed in a standardized manner using a Waterpik® Aquarius® water flosser. Color and roug…
Shear bond strength of orthodontic metal brackets to aged composite using three primers
2017
Background This study aimed to assess the effect of surface preparation with sandblasting and diamond bur along with the use of three primers on shear bond strength (SBS) of metal brackets to aged composite. Material and methods In this in vitro, experimental study, 60 Filtek Z250 composite discs were fabricated (10×2mm), immersed in distilled water for 24 hours and subjected to 5000 thermal cycles. They were randomly divided into two groups (n=30) of sandblasting with aluminum oxide particles for 10 seconds and surface roughening with bur. Each group was randomly divided into three subgroups (n=10) for use of Transbond XT, Assure Plus and Composite Primer. Metal brackets were bonded and th…
Synthesis of nanostructured amorphous carbon-copper composite films by plasma-enhanced chemical vapour deposition
2016
Abstract Nanostructured amorphous carbon-copper composite films were formed by plasma-enhanced chemical vapour deposition. The formation was done on copper-silicon substrates at 25 °C, 300 °C, 520 °C, and 700 °C temperatures using an acetylene gas at 40–70 Pa pressure. The heating of the Cu Si substrate induced formation of Cu nanospheres with 50–500 nm size depending on the substrate temperature. The microstructure and composition of nanostructured carbon-copper composite films were investigated. The SEM views showed formation of amorphous carbon films with the randomly distributed nanostructures. The oxygen concentration in the composite films decreased with the increased heating temperat…
Turbulence structures over irregular rough surfaces
2010
Turbulent flow in a channel with irregular two-dimensional rough surfaces is analysed through wall-resolving large eddy simulation (LES). Both walls of the channel are roughened through the superimposition of sinusoidal functions having random amplitude and four different wavelengths. The downward shift of the velocity profile in the log region due to the roughness, known as roughness function, is well captured in the simulations. The spanwise and wall-normal turbulence intensities are found to increase with the roughness height, while the streamwise component decreases. The analysis of the Reynolds stress anisotropy tensor highlights a tendency towards isotropisation, confirmed by the vort…
Machinability of Engineering Materials
2008
Chapter 13 provides comprehensive knowledge regarding machinability of construction materials and characterizes various meanings of this specific material feature, allowing effective selection of machining conditions. Factors affecting machinability and typical causes of low machinability are discussed. Three groups of machinability criteria are selected, including basic, substitutive and auxiliary ones. In particular, the cutting speed corresponding to economic or high productivity criteria and obtainable surface roughness are distinguished as basic machinability criteria. Relative and absolute machining rating systems are highlighted, and appropriate material groups and values of the mach…