Search results for " SOLID"
showing 10 items of 1333 documents
Geometric and conceptual knowledge representation within a generative model of visual perception
1989
A representation scheme of knowledge at both the geometric and conceptual levels is offered which extends a generative theory of visual perception. According to this theory, the perception process proceeds through different scene representations at various levels of abstraction. The geometric domain is modeled following the CSG (constructive solid geometry) approach, taking advantage of the geometric modelling scheme proposed by A. Pentland, based on superquadrics as representation primitives. Recursive Boolean combinations and deformations are considered in order to enlarge the scope of the representation scheme and to allow for the construction of real-world scenes. In the conceptual doma…
Introducing Thermal Inertia for Monitoring Snowmelt Processes With Remote Sensing
2019
Thermal inertia has been successfully used in remote sensing applications that span from geology, geomorphology to hydrology. In this paper, we propose the use of thermal inertia for describing snow dynamics. Two different formulations of thermal inertia were tested using experimental and simulated data related to snowpack dynamics. Experimental data were acquired between 2012 and 2017 from an automatic weather station located in the western Italian Alps at 2,160 m. Simulations were obtained using the one‐dimensional multilayer Crocus model. Results provided evidences that snowmelt phases can be recognized, and average snowpack density can be estimated reasonably well from thermal inertia o…
Influence of the Preparation Temperature on the Photocatalytic Activity of 3D-Ordered Macroporous Anatase Formed with an Opal Polymer Template
2018
Even if many aspects of three-dimensionally ordered macroporous (3DOM) titania have been extensively studied, the interplay between the amorphous and crystalline components of their skeleton wall has not attracted too much attention, although it should strongly influence the properties of these materials. In order to gain new insight on this interplay, we have studied in detail the wall structure of three 3DOM titania samples prepared by heating the 3DOM titania precursor at 673, 773, and 873 K by X-ray diffraction, thermogravimetric analysis, differential thermal analysis, N2 adsorption/desorption, pore-size distribution, high-resolution transmission electron microscopy, and IHmagic-angle-…
PMMA-titania nanocomposites: Properties and thermal degradation behavior
2012
Titania nanoparticles were prepared using a solegel method and calcination at 200 and 600 � C in order to obtain anatase and rutile phases, respectively. The obtained powders were used to prepare PMMAe titania nanocomposites by a melt compounding method. The effect of the crystalline phase and the amount of titania, in the range 1e5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of X-ray diffractometry (XRD), transmission electron microscopy (TEM), 13 C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy ( 13 C{ 1 H}CP-MAS NMR), including the measurement of proton spinelattice relaxation time in t…
Thermogravimetric and Sorption Measurement Techniques/Instruments
2002
The survey covers commercially offered instruments for the determination of the surface structure of porous solids based on isothermal measurement of physisorption of inert gases and of thermogravimetric instruments. Basic assumptions, features and experimental uncertainties are compared.
A new approach to the synthesis of intermetallic compounds: mild synthesis of submicrometric CoxMy (M = Mo, W; x∶y = 3∶1 and 7∶6) particles by direct…
2002
A simple processing route to cobalt–molybdenum and cobalt–tungsten intermetallics (CoxMy, where M = Mo and W, and x∶y = 3∶1 and 7∶6) has been developed, on the basis of the use of precursors resulting from freeze-drying of aqueous solutions of the appropriate common metal salts. The influence of the preparative variables on the outcomes of this procedure is examined. These compounds are prepared as single phases by thermal reduction of amorphous freeze-dried powders under a hydrogen–argon atmosphere (8% H2), followed by slow cooling of the samples. The materials have been characterised by X-ray powder diffraction, metal analysis, scanning electron microscopy and thermogravimetry under an ox…
Nanoporous alumina membranes filled with solid acid for thin film fuel cells at intermediate temperatures
2004
Thin film fuel cells have been fabricated by impregnation of inorganic porous membranes with inorganic proton conductor. Anodic alumina membranes (50 μm thick and pore diameter of 200 nm), filled with CsHSO4 salt have been used as protonic conductor in a hydrogen-oxygen fuel cell working between 423 and 443 K in dry atmosphere. Polarization curves at 433 K showing ohmic control with open circuit values near 0.8 V and short circuit current around 8 mA cm−2 have been obtained. Possible causes of degradation as well as alternative routes to overcome some of the problems encountered with this approach will be reported. Keywords: Solid acid, Anodic alumina membranes, Pore filling, Thin film fuel…
Thermally induced structural modifications and O2 trapping in highly porous silica nanoparticles
2014
Abstract In this work we investigate by Raman spectroscopy the effect of isochronal (2 h) thermal treatments in air in the temperature range 200–1000 °C of amorphous silicon dioxide porous nanoparticles with diameters ranging from 5 up to 15 nm and specific surface 590–690 m2/g. Our results indicate that the amorphous structure changes similarly to other porous systems previously investigated, in fact superficial SiOH groups are removed, Si–O–Si linkages are created and the ring statistic is modified, furthermore these data evidence that the three membered rings do not contribute significantly to the Raman signal detected at about 495 cm−1. In addition, after annealing at 900 and 1000 °C we…
Fermentation and elutriation of primary sludge: Effect of SRT on process performance
2007
Abstract A primary sludge fermentation–elutriation pilot plant was operated using in-line and side-stream schemes. The influence of solids retention time, recirculation sludge flow-rate and solids concentration on the fermentation–elutriation process performance has been assessed in this paper. The use of high elutriation flows (12% of influent flow) improved the volatile fatty acids (VFA) concentration in the effluent stream. Suspended solids removal efficiency decreased in the primary settler when the solids retention time (SRT) was increased from 4 to 8 days. Disintegration step during hydrolysis process was pointed out as the main reason for that decrease. Maximum VFA productions were a…
Comparison between hybrid moving bed biofilm reactor and activated sludge system: a pilot plant experiment
2010
The paper presents the comparison between the traditional activated sludge system (AS) and a hybrid moving bed biofilm reactor (HMBBR). In particular, an experimental campaign has been carried out at the WWTP in Palermo (Italy), on a pilot plant consisting of two pre-anoxic schemes. The aerated tank of the HMBBR line was filled with suspended carriers (AnoxKaldnes™ K1), with a 30% filling ratio. The hydraulic load of the HMBBR line was increased up to two times the AS one. Further, in order to distinguish the additional contribution of the attached biomass for the HMBBR system, in the two lines the Mixed Liquor Suspended Solids (MLSS) was maintained as equal as possible. The monitoring peri…