Search results for " Scanning"
showing 10 items of 988 documents
Effect of alloy type and casting technique on the fracture strength of implant-cemented structures.
2010
Objectives: To evaluate the influence of alloy type and casting procedure on the fracture strength (FS) of metallic frameworks for implant-supported fixed prostheses. Study design: Thirty three-unit structures for lower posterior bridges were waxed-up and randomly assigned to two groups (n=15) according to alloy type and casting technique: Group 1 (C): cobalt-chromium cast in a centrifugal machine (TS1, Degussa-Hüls); Group 2 (T): titanium cast in a pressure-differential device (Cyclarc II, Morita). Each structure was cemented onto two prefabricated abutments under a constant seating pressure. After 6 months of water aging, samples were loaded in a static universal testing machine (EFH/5/FR…
SURFACE AND VOLUME CRYSTALLIZATION OF METALLIC GLASS (Ni50Zr50)99.9P0.1 AS INVESTIGATED BY EXOELECTRON EMISSION (EEE) AND DIFFERENTIAL THERMAL ANALYS…
2002
Surface and volume crystallization of amorphous, melt-quenched (Ni50Zr50)99.9P0.1 alloy has been investigated by measurements of the temperature dependencies of the intensity of photostimulated exoelectron emission (EEE) and by differential scanning calorimetry (DSC). A comparison of these dependencies enables one to assess the tendency of the investigated materials to premature surface crystallization. For the (Ni50Zr50)99.9P0.1 alloy the surface crystallization occurs at temperatures distinctly lower than that for the crystallization in bulk. The activation energy for the surface crystallization, determined by the Ozawa method, i.e. from the shift of EEE peak corresponding to the surface…
On the origin of the sigmoid shape in the UO2 oxidation weight gain curves
2009
International audience; Cracking and spalling are known to occur during the oxidation of UO2. However, these phenomena are not considered by the existing kinetic models of the oxidation of UO2 into U3O8. In this study the oxidation of UO2 samples of various sizes from the single crystal to nanopowders, has been followed by isothermal and isobaric thermogravimetry, environmental scanning electron microscopy and in situ X-ray diffraction at temperatures ranging from 250 to 370°C in air. It has been shown that cracking occurs once a critical layer thickness of intermediate oxide has been reached, which corresponds to the beginning of the sigmoid kinetic curve. Cracking contribution to the sigm…
Spin-polarized scanning tunneling microscopy and spectroscopy of ultrathinFe∕Mo(110)films usingW∕Au∕Cotips
2006
We report on magnetic contrast observed in low-temperature spin-polarized scanning tunneling microscopy (SP-STM) of Fe nanowires deposited on Mo(110) using tungsten tips covered by $\mathrm{Au}∕\mathrm{Co}$ thin films. Due to the spin reorientation transition of Co films on Au an out-of-plane magnetic sensitivity is obtained for tips with thin cobalt films (up to 8 monolayers of Co), while for thicker Co coverages an in-plane magnetization component can be probed. Using $\mathrm{W}∕\mathrm{Au}∕\mathrm{Co}$ tips with out-of-plane magnetic sensitivity we show that the one (ML) and two (DL) atomic layers thick Fe nanowires prepared using step flow growth on a Mo(110) crystal are perpendicularl…
Enhanced light confinement in a triangular aperture: Experimental evidence and numerical calculations
2005
We have recently demonstrated that the electric near-field emerging from a triangular aperture at the tip of a metal-coated tetrahedron of glass exhibits a highly confined and intense spot when the light incident from within the glass body is polarized perpendicularly to one edge of the aperture [Naber et al., Phys. Rev. Lett. 89, 210801 (2002)]. Here we present additional experimental material and a theoretical confirmation of this near-field optical effect. Based on the model of a triangular aperture in a planar metal film, we studied the influence of aperture size and film material on the field distribution. Even though our theoretical model is rather simplified as compared to the experi…
Atomic Force Microscopy Study of Yeast Cells Influenced by High Voltage Electrical Discharge
2008
Human cells are the eukaryotic ones. Simulation of wide-spectrum electromagnetic radiation influence on eukaryotic cells was performed with yeast which is usually used now in molecular biological and medical biological investigations as the ideal model of eukaryotic system. The aim of the research was to observe possible induced alterations of the cell morphology. Atomic force microscopy (AFM) and electron scanning microscopy (ESM) have been applied to image the surface of cells exposed to electromagnetic radiation.
Inorganic polymeric phosphate/polyphosphate as an inducer of alkaline phosphatase and a modulator of intracellular Ca2+ level in osteoblasts (SaOS-2 …
2011
Inorganic polymeric phosphate is a physiological polymer that accumulates in bone cells. In the present study osteoblast-like SaOS-2 cells were exposed to this polymer, complexed in a 2:1 stoichiometric ratio with Ca(2+), polyP (Ca(2+) salt). At a concentration of 100 μM, polyP (Ca(2+) salt) caused a strong increase in the activity of the alkaline phosphatase and also an induction of the steady-state expression of the gene encoding this enzyme. Comparative experiments showed that polyP (Ca(2+) salt) can efficiently replace β-glycerophosphate in the in vitro hydroxyapatite (HA) biomineralization assay. In the presence of polyP (Ca(2+) salt) the cells extensively form HA crystallites, which r…
Physical-mechanical effects of Nd:YAG laser on the surface of sound dental enamel.
1993
Human dental enamel samples were irradiated using a 5 kHz Q-Switched Nd:YAG laser. An increase in Knoop microhardness and modification of the membrane permselectivity were detached. These results and the changes observed by SEM, can be connected with the fusion of the enamel surface.
Recent advances and potential applications of modulated differential scanning calorimetry (mDSC) in drug development.
2016
Differential scanning calorimetry (DSC) is frequently the thermal analysis technique of choice within preformulation and formulation sciences because of its ability to provide detailed information about both the physical and energetic properties of a substance and/or formulation. However, conventional DSC has shortcomings with respect to weak transitions and overlapping events, which could be solved by the use of the more sophisticated modulated DSC (mDSC). mDSC has multiple potential applications within the pharmaceutical field and the present review provides an up-to-date overview of these applications. It is aimed to serve as a broad introduction to newcomers, and also as a valuable refe…
Influence of mechanical activation on the physical stability of salbutamol sulphate.
2003
Abstract In order to obtain the optimal particle size distribution for pharmaceutical powders in dry powder inhalers the particles have to be micronised. In most cases the process of micronisation is connected with a high input of energy which induces disorder and defects on the surface of the drug particles and as a result changes in the crystallinity. Consequently, changes in the physical stability of the powders may occur. To investigate changes on the physical stability of the powder, different analytical methods are used in the present investigation: laser diffraction, Differential Scanning Calorimetry (DSC), isothermal microcalorimetry and DVS-method. Air-jet-milling is one of the mos…