Search results for " Scanning"
showing 10 items of 988 documents
Synthesis of PP-LCP graft copolymers and their compatibilizing activity for PP/LCP blends
1998
The aim of this work was the synthesis of new graft copolymers consisting of polypropylene (PP) backbones and liquid crystalline polymer (LCP) branches, to be used as compatibilizing agents for PP/LCP blends. The PP-g-LCP copolymers have been prepared by polycondensation of the monomers of a semiflexible liquid crystalline polyester (SBH 1 : 1 : 2), that is, sebacic acid (S), 4,4′-dihydroxybiphenyl (B), and 4-hydroxybenzoic acid (H) in the mole ratio of 1 : 1 : 2, carried out in the presence of appropriate amounts of a commercial acrylic-acid-functionalized polypropylene (PPAA). The polycondensation products, referred to as COPP50 and COPP70, having a calculated PPAA concentration of 50 and…
Thermal and Mechanical Properties of Unvulcanized Polypropylene Blends with Different Elastomers: Ethylene-Propylene-Diene Terpolymer, Nitrile-Butadi…
2013
In this work, composites of isotactic polypropylene (PP) with three unvulcanized elastomers – terpolymer of ethylene-propylene-dicyclopentadiene (EPDM), chlorinated polyethylene (CPE) and copolymer of acrylonitrile-butadiene (NBR) – have been investigated. The purpose of the investigation was to create PP/elastomer blend composites of significantly different compositions (with an excess of PP, intermediate ones, and with an excess of elastomer) and to study the dependence of tensile behaviour and elastic properties on the blends with different component ratio. Tensile properties have been recognized from the stress-strain curves. The changes of elastic modulus have been characterized with r…
Structure and Mechanical Properties of Melt Intercalated Po1lypropylene–Organomontmorillonite Nanocomposites
2010
The preparation and properties of polymer nanocomposites, obtained by melt-compounding of polypropylene (PP) and organomontmorillonite (OMMT) modified by different alkyl ammonium salts, are described. A copolymer of maleic anhydride and PP was used as a compatibilizing additive. Nanocomposites with OMMT content of 1, 5 and 10 wt% were prepared and tested. The influence of OMMT content on the tensile stress–strain curves, elastic modulus, yield and tensile strength, and ultimate elongation of the nanocomposites is determined. The results of measuring the microhardness and impact strength of polymer nanocomposites are presented. Long-term creep tests were performed to predict the long-term de…
Improved experimental characterization of crystallization kinetics
2005
Polymer solidification occurring in many processes, like for instance injection molding, compression molding and extrusion, is a complex phenomenon, strongly influenced by the thermo-mechanical history experienced by the material during processing. From this point of view, characterization of polymer crystallization in the range of processing con- ditions, i.e. including high cooling rate, is of great technological and academic interest. Quiescent, non-isothermal crys- tallization kinetics of two polypropylene resins were investigated using a new method, based on fast cooling of thin samples with air/water sprays and optical detection of the crystallization phenomenon. The range of cooling …
A study of spalling behaviour of PAN fibre-reinforced concrete by thermal analysis
1993
Comparisons are made between polypropylene (PP) fibres and polyacrylonitrile (PAN) fibres in order to relate the thermal properties of fibres with the respective fibre mortar behaviour under thermal exposure. Thermogravimetry (TG), differential scanning calorimetry (DSC) and thermochromatography (ThGC) are utilized. When a cementitious fibre mortar is being heated, several physical phenomena occur in the temperature range between 100°C and 200°C. There is a significant difference in the thermal behaviour between PP and PAN fibres. PP fibres melt at 160–170°C. The non‐melting behaviour of PAN fibre together with its rapid exothermic degradation reactions at around 300°C may add risk to the s…
The Storage of Dried Apricots: The Effect of Packaging and Temperature on the Changes of Texture and Moisture
2012
During storage, the packaging material was crucial in the product's moisture variation. The aim of this work was to study the changes of both the moisture content and the texture of dried apricots packaged in two types of containers, namely glass and polypropylene trays, which were thermosealed with two different films and stored at a constant temperature (5, 15, 25 and 35C). The moisture content and texture of the product were analyzed periodically over a period of 12 months. In addition, a differential scanning calorimetry of the product was carried out for a better understanding of the relationship between these parameters. In samples packaged in films, the maximum force value increased …
Study of thermal properties of polyethylene and polypropylene nanocomposites with long alkyl chain-substituted POSS fillers
2016
The effect of incorporation of octakis({alkyl}dimethylsiloxy)octasilsesquioxanes molecules with n-octyl, n-octadecyl and 4-methyl-hexyl substituents on thermal properties of polypropylene (PP), low-density polyethylene (LDPE) and high-density polyethylene (HDPE) was investigated. Thermal properties of those composite materials were evaluated by means of the differential scanning calorimetry (DSC) and thermogravimetric analysis (TG) methods. The type and mass% content of POSS nanofillers influenced the crystallization and melting properties as well as thermal stability of the obtained polyolefin nanocomposites. The incorporated POSS particles—acting as nucleating agents—improved the crystall…
Polymer Solidification under Pressure and High Cooling Rates
2000
Abstract Polymer solidification under processing conditions is a complex phenomenon in which the kinetics of flow, high thermal gradients and high pressures determine the product morphology. The study of polymer structure formed under pressure has been mainly made using conventional techniques such as dilatometry and differential scanning calorimetry under isothermal conditions or non isothermal conditions but at cooling rates several orders of magnitude lower than those experienced in industrial processes. A new equipment has been recently developed and improved to study the crystallization of polypropylene when subjected to pressure and cooled rapidly. An experimental apparatus essentiall…
Properties of PP/MWCNT-COOH /PP composites made by melt mixing versus solution cast /melt mixing methods
2015
An approach on improvement of the properties of polypropylene / carbon nanotube (PP/CNT) composites is reported. PP blend compositions with carboxylic acid functionalized multi-walled carbon nanotubes (MWCNT-COOH) at filler content 1.0 wt.% were researched. One part of the composites was manufactured by direct thermoplastic mixing PP with the filler, but the other one was made from solution casted masterbatch with the following thermoplastic mixing. An increase of mechanical properties (Young's modulus, storage modulus and tensile strength), compared to an increase of glass transition temperature indicated a reinforcement effect of CNTs on PP matrix, determined from the tensile tests and di…
Synthesis and characterization of redox-sensitive polyurethanes based on L-glutathione oxidized and poly(ether ester) triblock copolymers
2021
Abstract Segmented polyurethanes, based on PCL-PEG-PCL copolymers, 1,4-diisocyanatobutane and l -glutathione oxidized, used as chain extender, were synthetized. Three different reactions conditions were investigated using three different copolymers having ɛ-CL/polyethylene glycol molar ratios equal to 12, 24 and 36 and three different reaction conditions. As investigated by size exclusion chromatography analyses and quantification of l -glutathione, the polymerization and the extension phase's efficiency depended on the ɛ-CL/PEG ratio and the extension phase's operating temperature. Three selected polyurethanes were characterized by spectroscopic, differential scanning calorimetry (DSC) and…